Zitat

Originally posted by digi_casi
afaik, only hdd and usb stick are supported by dreamflash.

You are of course the Master, but the FAQ for Dreamflash Version 1.4 on the /board.old/ shows NFS can be used. I managed to install an image on the pc, but no boot menu on rebooting. It is confusing !

Regards, pcd.

Please provide some information about the hard- and software used.

Box type: DM5620
GUI (enigma1/enigma2): enigma1
Firmware version: own cvs

your question

I have Dreamflash Version 2.8 in my image. I also have nfs server Windows SFU in the pc. Nfs mount OK (from dreambox comm settings) with mount point /hdd. With Function Add Image I have installed an image. With Information I can see the image in the list below Flash Image. With Setup I have installed a skin in /var/tuxbox/config/enigma/boot.

When I reboot, I cannot see any boot menu, the box just boots to the Flash Image. DCC shows mount point /hdd (not mounted). Any advice how I can boot to an installed image ?

Regards, pcd.

It is not possible to start cvs images from pc nfs. They install ok, but when selected from menu, just hang. (DM5620).

No, I reinstalled and all working ok !

Regards, pcd.

Please provide some information about the hard- and software used.

Box type: DM5620
GUI (enigma1/enigma2): enigma1
Firmware version: own complete.img

your question

I can multiboot using Flashwizard with any new image (including my own) in flash. The problem is when I install a cvs image (also my own) in pc by nfs, it installs ok, but does not boot. Just hangs. Could it be because dreamflash is installed in the new cvs image ?

Second question, can dreamflash be used to install images in pc and boot by nfs ?

Regards, pcd.

Zitat

Originally posted by Paul_HU
Does anybody from DMM read this forum at all?

Paul_HU

Write in the English section, you are more likely to get response ! The source code is in the tuxbox cvs

Many thanks to all three of you. It works, and I can see the log on file with telnet closed.

Regards, pcd.

Hi,

Thanks. I can close the console now with enigma running. But still nothing goes into the file !

Regards, pcd.

Hi,

I can now see enigma log on the telnet console.

However, as I am using vlc streaming in my tests, I would like to see the log output on a file. If I do

killall rcS
killall enigma
enigma>/tmp/enigma.log

the log still keeps coming to the console, nothing goes to enigma.log although the file is created. If I exit the console, enigma turns off and the screen goes black. What am I doing wrong ?

Regards, pcd.

I need a new pair of glasses !

Many thanks and regards, pcd.

Hi dcdead,

This is the beginning of the log. Any clue from this ? There is no rcs in /bin. Could that be the problem ? rcs is in /etc/init.d, but if I do killall there, same result - no process killed.

Regards.

~ > cd /bin
/bin > killall rcs
killall: rcs: no process killed
/bin > killall enigma
killall: Could not kill pid '64': No such process
killall: Could not kill pid '67': No such process
killall: Could not kill pid '68': No such process
/bin > ./enigma
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2

Zitat

Originally posted by dcdead
You can see it one the console, if you restart enigma by hand, as i wrote you in the other thread

Thanks for the reply. The telnet log is below. At that point I go to the blue panel and select a plugin, nothing shows in the log. Normally with another well known image I get the list of plugins, selected plugin etc.

Regards.

~ > enigma
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2

[eHotplug] created successfully
+ (0) Configuration
reached rl 0
+ (1) Background File Eraser
+ (1) EAUDIO
+ (5) d-Box LCD Hardware
couldn't open LCD - load lcd.o!
+ (5) eActionMapList
+ (9) GFBDC
2044k video mem
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread createted successfully
+ (15) SystemInfo
+ (20) skin subsystem
loading skin: /var/tuxbox/config/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/stone.esml
illegal color "" specified
[FONT] adding font /share/fonts/bluehigh.ttf...OK (Blue.Regular)
[FONT] adding font /share/fonts/bluebold.ttf...OK (Blue.Bold)
[FONT] adding font /share/fonts/pakenham.ttf...OK (lcd)
[FONT] adding font /share/fonts/md_khmurabi_10.ttf...OK (Replacement)
[FONT] adding font /share/fonts/unmrs.pfa...OK (Nimbus)
Font with name lcd already loaded, skip pakenham.ttf
fontalias eStatusBar does exist, skip make alias for font Nimbus
fontalias eChannelInfo does exist, skip make alias for font Nimbus
fontalias eWindow.TitleBar does exist, skip make alias for font Nimbus
fontalias eWindow.Childs does exist, skip make alias for font Nimbus
fontalias eListBox.EntryText.normal does exist, skip make alias for font Nimbus
fontalias eServiceSelector.Entry.Description does exist, skip make alias for fon
t Nimbus
fontalias eServiceSelector.singleColumn.Entry.Name does exist, skip make alias f
or font Nimbus
fontalias eEPGSelector.Entry.Description does exist, skip make alias for font Ni
mbus
fontalias eEPGSelector.Entry.DateTime does exist, skip make alias for font Nimbu
s
fontalias lcd.main.service_name does exist, skip make alias for font Nimbus
fontalias lcd.main.clock does exist, skip make alias for font Nimbus
fontalias lcd.menu.title does exist, skip make alias for font Nimbus
fontalias lcd.menu.element does exist, skip make alias for font Nimbus
fontalias eventview.description does exist, skip make alias for font Nimbus
fontalias eventview.date does exist, skip make alias for font Nimbus
fontalias eventview.time does exist, skip make alias for font Nimbus
fontalias eventview.channel does exist, skip make alias for font Nimbus
Image with name eCheckbox.checked already loaded, skip checked.png
Image with name eCheckbox.unchecked already loaded, skip unchecked.png
Image with name lcd_menu already loaded, skip lcdmenu.png
Image with name lcd_scart already loaded, skip video.png
Image with name mainmenu.background already loaded, skip mainmenu/background-fs8
.png
Image with name sselect_folder already loaded, skip folder-fs8.png
image/img="shortcut.escape" - /enigma/pictures/shortcut/escape.png: file not fou
nd
+ (25) eTextInputField
+ (25) RC Input layer
poll made error
+ (26) Console RC Driver
+ (26) input device driver
Input device "Dreambox IR Keyboard" is a keyboard.
+ (26) DreamBox RC Hardware 2
failed to open /dev/dbox/fpkeys0
+ (26) d-Box RC Hardware
+ (30) eSlider
+ (30) eStatusBar
+ (30) eWindow
+ (30) eWidget
+ (30) eProgress
+ (30) eLabel
+ (30) eCheckbox
+ (30) eButton
+ (30) eChannelInfo
+ (35) textedit field actions
+ (35) number actions
+ (35) cursor actions
+ (35) focus actions
+ (35) list actions
+ (35) shortcut actions
+ (35) enigma standby actions
+ (35) TransponderEditWindow Actions
+ (35) enigma helpwindow actions
+ (35) rotor menu actions
+ (35) enigma vcr actions
+ (35) timer view actions
+ (35) timer edit actions
+ (35) tuxtxt offset actions
+ (35) epg selector actions
+ (35) enigma mainmenu actions
+ (35) EPG Style Selector actions
+ (35) service selector actions
+ (35) enigma main actions
+ (35) enigma global actions
+ (35) enigma event view actions
+ (39) stream watchdog
+ (40) eDVB lib
[DVBCI] start
[DVBCI] error opening /dev/ci
[DVBCI] start
[DVBCI] error opening /dev/ci1
[DVBCI] GET_STATUS failed (Bad file descriptor)
[DVBCI] module removed
1 lnbs readed
reading services
loaded 80 services
reading bouquets
loaded 32 bouquets
ok
[eAVSwitch] failed to load scart-config (scart.conf), using default-values
[DVBCI] GET_STATUS failed (Bad file descriptor)
[DVBCI] module removed
[eAVSwitch] setInput 0, avsfd=18
eDVB::eDVB done.
+ (45) eServiceInterface
+ (46) eServiceFileHandler
+ (46) eServiceStructureHandler
+ (47) eServiceHandlerJPG
+ (47) eServicePlaylistHandler
+ (47) eServiceHandlerMP3
+ (47) eServiceHandlerDVB
+ (48) eDVBCAHandler
+ (48) EPG cache
[EPGC] Initialized EPGCache
+ (48) socket mmi handler
[eSocketMMIHandler] created successfully
+ (49) Timer Manager
loading playlist... /var/tuxbox/config/enigma/timer.epl
[eTimerManager] deepstandbywakeup is 0
[eTimerManager] now deepstandbywakeup is 0
[eTimerManager] delKey deepstandbywakeup
Use valid Linux Time (RTC?)
[EPGC] time updated.. start EPG Mainloop
reached rl 50
[ENIGMA] loading default keymaps...
couldn't load key bindings for device d-box Buttons
couldn't load key bindings for device neue d-box Fernbedienung
poll made error
poll made error
poll made error
[eDVB] use IP: 192.168.1.4, Netmask: 255.255.255.0, gateway 192.168.1.1, DNS: 19
2.168.1.1
open /dev/dvb/card0/ancillary0 failed(Device or resource busy)
open /dev/dvb/card0/ancillary0 failed(Device or resource busy)
lcdMain created: 0x105e46a0
[eZapMain]wasSleeping is 0, wasDeepStandby is 0
skin has undefined element: snr_progress
skin has undefined element: agc_progress
skin has undefined element: ber_progress
skin has undefined element: snr_num
skin has undefined element: agc_num
skin has undefined element: ber_num
skin has undefined element: snr_text
skin has undefined element: agc_text
skin has undefined element: ber_text
no sapi
loading playlist... /hdd/movie/recordings.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/playlist.epl
loading playlist... /var/tuxbox/config/enigma/userbouquets.tv.epl
loading playlist... /var/tuxbox/config/enigma/userbouquets.file.epl
loading playlist... /var/tuxbox/config/enigma/userbouquets.radio.epl
loading playlist... /var/tuxbox/config/enigma/userbouquet.33fc5.tv
loading playlist... /var/tuxbox/config/enigma/userbouquet.94b4c.radio
write number to led-display
------------> changed! 0
[TUNE] tuning to 11678263/27501730/H/0@130
set continuous tone OFF and voltage to 13V
set continuous tone OFF and voltage to 13V
Horizontal
Low Band
DiSEqC Switch cmd = 00f2
Rotor DiSEqC Param = 01 (use stored position)
2 DiSEqC cmds to send
no Toneburst (MiniDiSEqC)
ROTOR RUNNING EMIT
[FONT] creating new font color cache entry ff000000 .. 00ffffff
[FONT] creating new font color cache entry 33294a6b .. 00ffffff
Rotor Cmd is sent
FE_SET_FRONTEND OK
<-- tuned
[ENIGMA_DYN] lockWebIf = 1
[ENIGMA] starting httpd
[SERVERSOCKET] ERROR on bind() (Address already in use)
[NET] httpd server FAILED on port 80
activate enigma serial http interface
[ENIGMA] ok, beginning mainloop
+ (54) wizard: tv system
tvsystem already selected.. do not start tvsystem wizard
+ (55) wizard: language
+ (56) wizard: fpudate
+ (57) wizard: timezone
Dont run Timezone Setup.. timezone is already selected
waitpid: No child processes
+ (58) wizard: scan
reached rl 75
[eTimerManager] setNextEvent
[eTimerManager] updated ( 0 waiting events in list )
[eDVB] restart Samba
[eDVB] do nfs/cifs/smbfs mounts
poll made error
killall: nmbd: no process killed
killall: smbd: no process killed
waitpid: No child processes
sh: smbd: not found
waitpid: No child processes
sh: nmbd: not found
waitpid: No child processes
waited for child 194
waitpid: No child processes
write number to led-display
poll made error

Please provide some information about the hard- and software used.

Box type: 5620
GUI (enigma1/enigma2): enigma1
Firmware version: cvs 56x0

your question

Could someone please suggest how to see the eDebug function output from a plugin ?

The file /var/log/messages remains empty and with telnet no eDebug output appears in the console.

Regards, pcd.

Hi Kat-CeDe,

Thanks. I did as you suggested, but I now get a large number of errors after 'make dreamboximage_root'. I did not get these errors before.

Anyway, I have now installed my backup files and it is back to where it was. =)

The expert web interface problem has not been solved yet !

Regards, pcd.

ps. Its all done now, thanks.

Please provide some information about the hard- and software used.

Box type: dm5620
GUI (enigma1/enigma2): enigma1
Firmware version:cvs 56x0

your question

Hi,

I am trying to use a plugin (movieplayer) in a cvs image. It requires 'expert web interface'. I have added the following text in /apps/tuxbox/enigma/configure.ac then did (1) deleted .part_enigma from /root/cdkflash (2) did 'make dreamboximage_root'. This did not change the web interface from standard.

Can somebody please advice what I should do to install expert web interface in the image ?

CPPFLAGS="$CPPFLAGS -DDEBUG"
fi

if test "$BOXTYPE" = "dm56x0" ; then
CPPFLAGS="$CPPFLAGS -DENABLE_RFMOD -DENABLE_EXPERT_WEBIF -DDEBUG"
elif test "$BOXTYPE" = "dm7020" ; then

Regards, pcd.

Zitat

Originally posted by dcdead
exactly as i wrote:

killall rcS
killall enigma
enigma > /tmp/enigma.log

then you'll find enigma output in this file. As an alternative you can start enigma normally and you'll see it's output directly on the console

I did that, but nothing appears in /tmp/enigma.log

I am using a cvs 56x0 image. Does your instruction apply to a 56x0 image ?

Zitat

Originally posted by dcdead
because enigma does not output to syslog

if you want to see enigma output, you'll have to redirect it (enigma > /tmp/enigmalog)

Please, how exactly do this 'redirect' ?

Zitat

Originally posted by dcdead
It means that you've logged in as user root (most likely using a telnet connection)

So, why no syslog appearing in /var/log/messages ?

Sorry, what does the second line mean ?

Please, how can I get debug log in a cvs image ? If I telnet 'syslogd' I get only following 2 lines in /var/log/messages:-

May 21 12:58:10 dreambox syslog.info syslogd started: BusyBox v1.01 (2006.04.15-10:26+0000)

May 21 12:58:36 dreambox auth.info login[93]: root login on `pts/1'

Regards, PCD.