I think there is need for updatatin of rescue.
Before I have several time flashed image through the method given in the link below.
This method is not working any more there is any other solution to flash via telnet plugin or other thing
Shure, it is still working
The dreamflash daemon is a part of the rescue-loader. If it no longer works, you are either doing something wrong or the box or the rescue loader is broken. But without further information there is no way to help.
Shure, it is still working
The dreamflash daemon is a part of the rescue-loader. If it no longer works, you are either doing something wrong or the box or the rescue loader is broken. But without further information there is no way to help.
On my dm7080 suddenly the netcard died. I dont know what it was but only works via wifi usb. Then when i reboot in rescue mode appear the message on lcd screen waiting for dhcp........ but never got IP address.
I have tried with the method in post #3 with merlin and BH images but doesn´t get to run the flash process.
did you renamed the image to "dreambox-image-dm7080.tar.xz"?
did you renamed the image to "dreambox-image-dm7080.tar.xz"?
yes exactly
Which resue loader is installed? The latest? Previous versions do not support flashing by USB.
There are at least 4 reasons why it will not work. So "it does not work" is definitely not enough information
Which resue loader is installed? The latest? Previous versions do not support flashing by USB.
There are at least 4 reasons why it will not work. So "it does not work" is definitely not enough information
i have installed
Enigmaversion: 4.3.3r3-2021-10-29
Imageversion: Experimental 2021-10-29
Webifversion: 1.9.0
FPversion: 1.2
Devicename: dm7080
so will be the last one vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin
Did you format the USB Device with FAT32 or ext4?
Did you correctly labeled the fist partition with capital letters? -> DREAMFLASH
Did you use the HP bootdisk tool for FAT32? Fast formating under Windows probably does not work.
Does the box boot into the rescue-loader without flashing or does the box boot only the flash image?
Does the box work correctly when booted from flash - except the defective NIC?
If the latest rescue-loader is installed, flashing via USB works without any problems as long as all instructions are followed. If not, something was done wrong or the box is defective.
Display MoreDid you format the USB Device with FAT32 or ext4? YES
Did you correctly labeled the fist partition with capital letters? -> DREAMFLASH YES
Did you use the HP bootdisk tool for FAT32? Fast formating under Windows probably does not work. NO
Does the box boot into the rescue-loader without flashing or does the box boot only the flash image? the box boot into the rescue-loader without flashing
Does the box work correctly when booted from flash - except the defective NIC? Boot waiting for dhcp in rescue mode.
If the latest rescue-loader is installed, flashing via USB works without any problems as long as all instructions are followed. If not, something was done wrong or the box is defective.
I will try to fromat the usb with the HP boot disk is the only thing could be .....
On my dm7080 suddenly the netcard died. I dont know what it was but only works via wifi usb. Then when i reboot in rescue mode appear the message on lcd screen waiting for dhcp........ but never got IP address.
I have tried with the method in post #3 with merlin and BH images but doesn´t get to run the flash process.
Wifi USB is not working in rescue mode ... therefore you can wait very long to get an ip address
Yes, that´s why Im looking for an alternative way to flash the image.
Dreamup MiniUSB Port ???
Did You Tried to Flash that Way ??
DeamUp is useless in this case. It does not support dreamboxes with an ext4 file system in Flash or image tarballs ...
