Hi experts,

I have successfully installed several times through USB, MD image on dm520. .

But since morning it shows below message.

Rescue Mode

Waiting for DHCP.

Kindly suggest solution how to move forward. As I don't have ethernet connection and on restart dm520 only flashes red, don't show screen.

Regards.

I think there is need for updatatin of rescue.

Before I have several time flashed image through the method given in the link below.

Beitrag

RE: easy method to flash rescue on DM520

Here's is easy method to Flash any Image on Dreambox (DM520, DM900 and DM920 etc), without Internet Connection. I explain here for DM520


1- Format USB with Fat-32
2- USB label " DREAMFLASH "
3- Copy image to USB Drive
4- Rename image " dreambox-image-dm520.tar.xz "
5 Insert USB to receiver
6 Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> / proc / stb / fp…

athart

3. November 2021

Here's is easy method to Flash any Image on Dreambox (DM520, DM900 and DM920 etc), without Internet Connection. I explain here for DM520

1- Format USB with Fat-32

2- USB label " DREAMFLASH "

3- Copy image to USB Drive

4- Rename image " dreambox-image-dm520.tar.xz "

5 Insert USB to receiver

6 Now from standby menu select Recovery Mode

or Shut Down your receiver and then press and hold touch button of receiver

or from telnet give any one of below commands

to-the-rescue

or

echo "rescue" >> / proc / stb / fp / boot_mode

reboot

Note: If receiver is on red light then first power off your receiver from rocker switch.

Then power on your receiver and touch and hold front touch panel within 500 ms to bring receiver into Rescue Mode