so make a bootlog, and we will see,
you can find instructions here in the forum,
so make a bootlog, and we will see,
you can find instructions here in the forum,
<Can you give me a link
Power Switch <> Power Button
There is a power switch on the back side.
On the Front a power button with Color LED Light
To get Rescue Mode
- Hold the front button!!!
- power on with switch on back side, dont release front button
- button light white, dont release front button
- button light blue, dont release front button
- button light blinking violet, dont release front button
- button light orange or off, now release front button
- wait
- Rescue Mode Screen on TV
explain your problem in English or in German in order to get help more quickly.
Option 1
Box is broken
Option 2
The Problem is you
is there any Image to SD memory card to restore the dreambox
Good luck
Thanks
Ich habe es noch nicht ganz verstanden..... funktioniert denn deine Box?
Ich meine kannst Du damit damit TV gucken oder bootet die Box gar nicht mehr?
In normal mode it is possible to watch TV but firmware picture broken can not update.
In rescue mode I do not get http://192.168.0.188 it is not possible to update to a new firmware
see my post #64
no answer
I do so #64 does not come to rescue mode only Dreambox logo
Gets no contact via telnet. Using the service port then I get in touch with the box. dreambox_oen #
have tested it does not work
echo "rescue" >> /proc/stb/fp/boot_mode
reboot
please google about ''OptiFlasher Pro Dmips Edition'' by yassinov , it may be of help to you.
I once use it when i was attempting to flash my DM through some website rescue mode. But got stock and my DM only flashes red light indefinitely .
In normal mode it is possible to watch TV but firmware picture broken can not update.
In rescue mode I do not get http://192.168.0.188 it is not possible to update to a new firmware
So after longtime we can now establish that the box does boot up and you have access to it with your remote?
But you can't watch any channels?
If so then go to network settings
Menu >> Setup >> Network >> Network Setup
Swedish menu language
Meny >> Inställningar >> Nätverk >> Nätverks Inställningare
Now check that screen if you have a ip-address and if it's matching the one you are trying to use.
If not then write this address down and exit all screens.
And from Standby/Restart screen put your box into Rescue Mode.
have tested it does not work
What does not work?
No reboot or no reboot into rescue mode?
You can try to update the rescue loader: update-rescue -v
MacDisein Sorry no IP address after the code you entered see the picture Dreambox logo and orange light
Will try to explain a little more my problem
"Normal mode" turn on the power switch on the back blue light is on
"Rescue mode" turn on the power switch on the back hold down the button on the front orange light is on
I use DCC-E2 to search for IP address
In "Normal mode" when I search, "DREAMBOX 192.168.0.188" appears
In "Rescue mode" when I search, I do not get the IP address
When I use "Putty" "Service port" "Rescue mode" I enter the Dreambox ”dreambox_one#”
Thank you for trying an older man