Frontprozessor Software reparieren nach flashen einer Dreamone Software - ENGLISH : Repair Frontprocessor Firmware after flashing a Dreamone Firmware

    • Offizieller Beitrag

    Wenn der Tuner in e2 zwar funktioniert, aber kein Bild/Ton kommt. Oder bei der Kanalsuche nichts gefunden wird, dann liegt es mit hoher Wahrscheinlichkeit an einer falschen Frontprozessor Software.


    Um das ganze zu reparieren muss man wie folgt vorgehen:


    Als erstes wieder ein Image für die DreamTwo flashen, falls noch nicht geschehen.


    Per Telnet/SSH oder über eine serielle console ein Terminal öffnen. (ggf. vorher ein Passwort für den Benutzer Root erzeugen über die grafische Bedieneroberfäche)


    Dann folgende Befehle ausführen:

    Code
    cd /tmp
    wget http://ghost.dream-multimedia-tv.de/central-two-noreset-200423-1.12.hex
    flash-nrf52 --force --program --verify --start central-two-noreset-200423-1.12.hex
    reboot


    Falls der download auf der Box nicht funktioniert, kann man die central-two-noreset-200423-1.12.hex Datei auch am PC runterladen mit rechter Maustaste auf dem Link und speichern unter. Und diese Datei dann per FTP oder Samba auf die Box laden in den Ordner /tmp.

    Danach die oben beschriebenen Befehle ohne das wget ausführen.


    Dabei müssen dann in etwa folgende Ausgaben kommen:

    Nach einem Reboot sollte die Box dann wieder normal funktionieren.


    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    ENGLISH:


    If the Tuner seems to work okay but no Video and Sound is output then it is very likely that the wrong front processor software is flashed.


    To repair this you have to proceed as followed:


    Firstly you have to flash a DreamTwo Firmware if not yet done.


    Connect to the Box via Telnet/SSH/serial shell (maybe a root password must be set via the GUI first).


    Then execute the following commands:

    Code
    cd /tmp
    wget http://ghost.dream-multimedia-tv.de/central-two-noreset-200423-1.12.hex
    flash-nrf52 --force --program --verify --start central-two-noreset-200423-1.12.hex
    reboot


    If the download doesn't work on the DreamTwo you can download the central-two-noreset-200423-1.12.hex File on the PC via right Mouse Button on the download link and choose "save to".

    After this upload the File via FTP/Samba in the /tmp Folder on the DreamTwo.

    Then execute the commands from above without the wget.


    During the procedure you must see the following output:

    After rebooting now the Box should be work again.

  • dear

    please help my dreambox two

    not work tuner not install any channal

    win check satfinder have signal good

    but not run any channal

    i tray all image

    and same backup for black hole

    after remote not working and tuner not working

    i tray to conecct remote by blototh is ok work

    but tuner not work not have any channal

    i tray all not working tuner

  • Und das geht auch so wie im ersten Beitrag beschrieben? Oder ist die Datei nur für die TWO und nicht für die ONE? Weil die heißt ja schon central-two-noreset-200423-1.12.hex

    Dreambox DM TWO mit 1TB HDD, GP4.1; Sony KD-65XF9005; Denon X3400H mit Teufel Ultima 40 Mk2 Surround

  • Und wo findet man die Version für die One, bzw. welche Befehle müsste man dann bei Telnet eingeben?

    Dreambox DM TWO mit 1TB HDD, GP4.1; Sony KD-65XF9005; Denon X3400H mit Teufel Ultima 40 Mk2 Surround

  • Seid ihr nicht mal mehr in der Lage im ersten Beitrag den Threadtitel zu lesen?


    Hier geht es doch nur um die Two!


    Frontprozessor Software reparieren nach flashen einer Dreamone Software.



    Die Supportthreads für die One sind hier! Push


    Wenn du ein Problem mit deiner One hast musst du dir dort den passenden Beitrag/Thread aussuchen,

    oder einen neuen erstellen.


    Macht doch nicht immer alle Thread´s kaputt.

    mfg.


    schnubbel
    Schiller Fan

  • You can try executing

    Code
    flash-nrf52 --program —-verify --start

    on a console manually

    thank you for reply

    copy this comand and paste the telnet show the message first update bootloader.

    how to update bootloader.easy method plz share