Egal ob ich den kernel aus /boot mit:
oder mit:
zu img machen.
ich gebe im bootlader folgendes ein:
Code
fatload mmc 0 ${loadaddr} autoexec.img
autoscr ${loadaddr}
fatload mmc 0 ${dtb_mem_addr} dtb
fatload mmc 0 ${loadaddr} boot.img
bootm ${loadaddr} - ${dtb_mem_addr}
alles da, wird auch geladen aber bootet nicht
siehe log:
Code
dreambox_one#fatload mmc 0 ${loadaddr} autoexec.img
reading autoexec.img
739 bytes read in 1 ms (721.7 KiB/s)
dreambox_one#autoscr ${loadaddr}
## Executing script at 01080000
1843270 bytes read in 31 ms (56.7 MiB/s)
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff01000
[OSD]osd_hw.free_dst_data: 0,1919,0,1079
[OSD]osd1_update_disp_freescale_enable
cvbs: outputmode[1080p50hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 31
config HPLL = 5940000 frac_rate = 0
HPLL: 0x3b3a04f7
HPLL: 0x1b3a04f7
HPLLv1: 0xdb3a04f7
config HPLL done
j = 6 vid_clk_div = 1
hdmitx phy setting done
hdmitx: set enc for VIC: 31
enc_vpu_bridge_reset[1216]
rx version is 1.4 or below div=10
dreambox_one#fatload mmc 0 ${dtb_mem_addr} dtb
reading dtb
80150 bytes read in 6 ms (12.7 MiB/s)
dreambox_one#fatload mmc 0 ${loadaddr} boot.img
reading boot.img
9857024 bytes read in 534 ms (17.6 MiB/s)
dreambox_one#bootm ${loadaddr} - ${dtb_mem_addr}
skip kernel signature check
ee_gate_off ...
CONFIG_AVB2:
avb2: 0
## Booting Android Image at 0x01080000 ...
reloc_addr =73f6c420
copy done
No androidboot.dtbo_idx configuredload dtb from 0x748d2c20 ......
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
No dtbo partition provided?
Fail to load dtbo partition data?
Uncompressing Kernel Image ... OK
kernel loaded at 0x01080000, end = 0x02a12a00
Loading Device Tree to 0000000073ece000, end 0000000073ee4915 ... OK
Starting kernel ...
uboot time: 149929359 us
bl31 reboot reason: 0xd
bl31 reboot reason: 0x1
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02
L0:e033003f
L1:00000703
L2:0000c067
L3:14000020
B2:00433060
B1:f0c021b0
TE: 612408
Alles anzeigen
Ich bin für jede Hilfe dankbar