DM820 network issue eth0: link is not ready​

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • DM820 network issue eth0: link is not ready​

      Hello ...
      My Dreambox DM 820HD network interface stop working Suddenly ,,, I've tried all possibilities to bring it up with no successful...


      I'm able to login through USB serial terminal using putty. with Rescue Mode but also without IP I can run commands easily
      and through terminal I try to bringup the network up. got error

      Shell-Script

      1. ifconfig eth0 down
      2. ifconfig eth0 up
      3. [993.178000] ADDRCONF(NETDEV_UP): eth0: link is not ready




      even if I add static IP not able to have network.
      ------
      I've add the rescue bin files on USB flash and mount it and copy the files to /tmp
      then run it on rescue mode


      Shell-Script

      1. flash-rescue vmlinux.gz-rescue-3.4-r1-dm820-20181017.bin



      and give result successful but sill network not up
      -------------

      I've read some thread that to go to CFE by Pressing Ctrl-C , with rescue mode but box always starts to the end. not able to catch CFE>

      my request how to go with CFE with proper way

      I've upload the output from Putty contains boot startputty.txt

      There is some things to help me?
    • I had the the same issue yesterday: no network after reboot, no blinking LED on the NIC, no network interfaces in the network settings.

      After changing the network cable and some failed attempts to start the network via serial connection I thougt the box is defective. So I checked if the box will receive an IP via DHCP in the rescue mode. The 1st attempt has failed, but on the 2nd one the box received an IP. After the reboot the NIC and (static) IP was also back in normal boot mode.

      So please try for serveral times if the box will receive an IP on bootup to the rescue mode.
      Gruß Fred
    • Fred Bogus Trumper schrieb:

      I had the the same issue yesterday: no network after reboot, no blinking LED on the NIC, no network interfaces in the network settings.

      After changing the network cable and some failed attempts to start the network via serial connection I thougt the box is defective. So I checked if the box will receive an IP via DHCP in the rescue mode. The 1st attempt has failed, but on the 2nd one the box received an IP. After the reboot the NIC and (static) IP was also back in normal boot mode.

      So please try for serveral times if the box will receive an IP on bootup to the rescue mode.
      thank you .
      unfortly I've try several times with no successful ..Ethernet port i guess it's dead.. for time been I'm using USB Wi-Fi Adapter (Tenda) is compatible with it .. but looking for USB Ethernet Adapter ..that compatible with it
      or fix the Ethernet :)

      so any one could please help me

      thanks
    • this adapter will work: Edimax EU-4208 USB2.0/LAN adapter
      Chipset: Asix IC AX88772B

      you will find the necessary drivers for this chipset on sources.dreamboxupdate.com/ for your dreambox: kernel-module-asix (for ASIX AX8817X based USB 2.0 Ethernet Devices)

      after installing the driveres the adapter should be detected automaticly

      Quellcode

      1. root@dm820:~# dmesg
      2. [177469.718000] asix 2-1:1.0: eth1: register 'asix' at usb-ehci_hcd-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:xx:xx:xx
      3. [177469.720000] usbcore: registered new interface driver asix
      4. [177470.485000] ADDRCONF(NETDEV_UP): eth1: link is not ready
      5. root@dm820:~#

      so you have to find an adapter with an ASIX AX8817X based chipset
      Gruß Fred

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Fred Bogus Trumper ()

    • thank you for your effort

      I found that the (Apple USB Ethernet Adapter A1277) working like charm after I had install

      kernel-module-asix as well as well as kernel-module-usbnet



      with following steps

      I install drivers on flash usb then connect it to dreambox

      mount the usb flash with

      mount /dev/sda1 /mnt
      cp kernel-module-usbnet_3.4-r1.13_mipsel.deb /tmp/

      cp kernel-module-asix_3.4-r1.13_mipsel.deb /tmp/


      cd /tmp


      dpkg -i kernel-module-usbnet_3.4-r1.13_mipsel.deb

      dpkg -i kernel-module-asix_3.4-r1.13_mipsel.deb