LAN problem&FTP

  • Der Empfänger hat das Laden beendet. Ich konnte es nur wiederherstellen, indem Sie das Flash-Laufwerk im Wiederherstellungsmodus über den Befehlsmontag mount / dev / sdb1 /mnt / usb
    Weiter von einer Flash-Karte in die internen Flash Boot Loader kopiert und Empfängerbild (zImage-rescue-3.14-r0-dm900-20180425.bin, Dreambox-Bild-deb-dm900-20180811.tar.hz) und dementsprechend sie wiederum gefüllt. Neustart des Empfängers, der gestartet wurde. Via LAN-Port konnte den Bootloader laden, da keine IP-Adresse (manuell eingestellt erzwingen ifconfig eth0 192.168.2.2 - Port nicht nur ein paar Mal holen, fing er an zu blinken, aber es gab keinen Zugriff auf das Netzwerk, ist es nicht anpingen ...) nicht vergeben
    Nun, wenn der Empfänger mit der offiziellen Firmware geladen wird, LAN-Anschluss also nicht rabotaet..V Einstellungen können Sie nur aktivieren oder die Schnittstelle deaktivieren, aber es passiert nichts. Ich habe auch einen Wi-Fi-Adapter im Empfänger installiert, der erfolgreich mit meinem Heimnetzwerk verbunden ist. Aber! Ich kann den Empfänger nicht in den FTP eingeben, es verbindet sich auch nicht mit Telnet.
    Durch den Befehl 'systemctl' habe ich festgestellt, dass der connman-wait-online.service-Prozess geladen wurde und aktiv war
    das ____ funktioniert nicht. Was kann mit der Funktionsunfähigkeit eines Doe-Ports verbunden sein?
    Und warum arbeitet der ftp nicht an der vifi? Vom Empfänger gehe ich durch den Browser, und ich sehe Addons aus dem Feed, das heißt, es funktioniert nur in einer Richtung.
    Entschuldigung für den Transfer selbst aus Russland

  • @ksnksn: Ich habe dazu noch einige Verständnisfragen: Es geht um eine DM900, richtig? Wird am TV Monitor ein Bild angezeigt? Funktioniert der Fernsehempfang?
    Wie sind die Netzwerkeinstellungen in der DM900 (am besten Screenshot beifügen)? Soll die IP-Adressvergabe manuell oder automatisch über DHCP erfolgen?
    Wie ist das Netzwerk konfiguriert, an das die DM900 angeschlossen werden soll? Router- / Gatewayadresse, Netzwerkmaske? Ist DHCP im Netzwerk aktiviert?
    Ich denke, dass die Netzwerkeinstellungen in der DM900 nicht stimmen und deswegen FTP und Internet nicht funktionieren.

  • LOG:


    CPU 01
    Dreambox DM900
    AVS init...
    AVS init OK
    AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
    AVS load_code offset =00051000
    LOADED
    AVS: overtemp mon ON



    single board
    select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
    MEMSYS-STD
    SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
    MCB: FLEX
    AVS start:status=000000ff
    STB: Current voltage=00000385(901)
    temperature=000077cb(30667)
    PV=00000344(836)
    MV=00000383(899)
    AVS FW rev=30333278 [0.3.2.x]
    OK
    DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
    DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 OK
    Sdram Scramble OTP = 0x00000001
    Sdram Scramble OK
    select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
    BFW load mode OTP = 0x0000000f
    bfw_hash_locked = 0x00000000
    BFW key3 OK, BFW load OK
    BFW v2.1.0
    COPY CODE... DONE
    MICH: disable success
    SSBL
    PINMUX
    CACHE FLUSH OK
    MMU ON
    CACHE FLUSH OK
    _fbss 07080cd0
    _ebss 0713dd70
    _end 0713dd90
    HEAP @ 07200000
    STACK @ 09300000
    ARCH: CONFIG OK
    CLR BSS 07080cd0 to 0713dd70 OK
    CLR SRAM OK
    CACHE FLUSH OK
    CPU CLKSET OK
    GO!



    ,/
    ,'/___, BOLT v1.18 v1.18 LOCAL BUILD
    .'__ ,' (2016-12-01 16:24:31 cynric@cynric-VirtualBox)
    /,' Copyright (C) 2016 Broadcom
    /'



    Board: BCM97252SSFF
    SYS_CTRL: product=72521, family=7439b1, strap=000000b2,
    otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000)
    otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020)
    CPU: 2x B15 [420f00f3] 1719 MHz
    SCB: 432 MHz
    DDR0 @ 1067MHz, DDR1 @ 1067MHz
    RESET CAUSE: 0x000001 power_on (1 of 23 possible causes)
    CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
    CS1: NAND: unrecognized ID: 0xffff 0xffffffff
    RTS0: 0x1101004, 256 clients, ok
    RTS1: 0x1181004, 256 clients, ok
    BOX MODE: 5
    card if inited
    set pwm to 0/255
    disp id 5420
    load image
    AVS: park check
    AVS: temperature monitoring enabled
    AVS: STB: V=0.899V, T=+31.641C, PV=0.836V, MV=0.899V, FW=30333278 [0.3.2.x]
    USB otp=00000040
    USB @ 0xf0470200: IPP is active low, IOC is negative polarity
    init fp
    found card in unknown state
    ca valid!
    set pwm to 200/255
    Normal bootup
    Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
    Reading 4249584 bytes from zImage...........
    Starting program at 0x8000 (DTB @ 0x7728000)



    32 bit boot...
    Uncompressing Linux... done, booting the kernel.
    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14-1.17-dm900 (weazle@lumen) (gcc version 5.3.0 (GCC) ) #1 SMP Tue Jul 25 17:50:08 CEST 2017
    [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [ 0.000000] Machine model: BCM97252SSFF
    [ 0.000000] moving dtb from 0x0000000007728000 to 0x0000000000839e70
    [ 0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [ 0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [ 0.000000] Memory policy: Data cache writealloc
    [ 0.000000] MCP: Enabling write pairing
    [ 0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
    [ 0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [ 0.000000] Memory: 1006896K/2097152K available (6114K kernel code, 214K rwdata, 1604K rodata, 244K init, 208K bss, 1073872K reserved, 16384K cma-reserved, 786428K highmem)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc0791cec (7720 kB)
    [ 0.000000] .init : 0xc0792000 - 0xc07cf0c0 ( 245 kB)
    [ 0.000000] .data : 0xc07d0000 - 0xc0805b20 ( 215 kB)
    [ 0.000000] .bss : 0xc0805b28 - 0xc0839e70 ( 209 kB)
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] Additional per-CPU info printed with stalls.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [ 0.000010] Switching to timer-based delay loop
    [ 0.000238] Console: colour dummy device 80x30
    [ 0.000259] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [ 0.000267] pid_max: default: 32768 minimum: 301
    [ 0.000358] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.000363] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.005829] Initializing cgroup subsys devices
    [ 0.005844] Initializing cgroup subsys freezer
    [ 0.005851] Initializing cgroup subsys net_cls
    [ 0.005879] CPU: Testing write buffer coherency: ok
    [ 0.006096] CPU0: update cpu_power 1024
    [ 0.006102] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [ 0.006152] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [ 0.007363] CPU1: Booted secondary processor
    [ 0.007380] CPU1: update cpu_power 1024
    [ 0.007383] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [ 0.007454] Brought up 2 CPUs
    [ 0.007465] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [ 0.007469] CPU: All CPU(s) started in SVC mode.
    [ 0.007850] devtmpfs: initialized
    [ 0.011460] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [ 0.012010] regulator-dummy: no parameters
    [ 0.012199] NET: Registered protocol family 16
    [ 0.013130] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [ 0.013320] cpuidle: using governor ladder
    [ 0.013326] cpuidle: using governor menu
    [ 0.014473] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [ 0.014557] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [ 0.016252] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [ 0.016325] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [ 0.016390] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [ 0.016455] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [ 0.016519] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [ 0.016586] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [ 0.016652] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [ 0.016715] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [ 0.016777] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [ 0.016847] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [ 0.016911] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [ 0.016976] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [ 0.017038] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [ 0.017103] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [ 0.017425] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [ 0.017652] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [ 0.022013] bio: create slab <bio-0> at 0
    [ 0.022318] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [ 0.022345] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [ 0.022374] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [ 0.022386] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [ 0.022739] SCSI subsystem initialized
    [ 0.022950] usbcore: registered new interface driver usbfs
    [ 0.022980] usbcore: registered new interface driver hub
    [ 0.023039] usbcore: registered new device driver usb
    [ 0.023058] media: Linux media interface: v0.10
    [ 0.023084] Linux video capture interface: v2.00
    [ 0.023118] pps_core: LinuxPPS API ver. 1 registered
    [ 0.023122] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.023132] PTP clock support registered
    [ 0.023362] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.023648] Bluetooth: Core ver 2.18
    [ 0.023663] NET: Registered protocol family 31
    [ 0.023666] Bluetooth: HCI device and connection manager initialized
    [ 0.023674] Bluetooth: HCI socket layer initialized
    [ 0.023680] Bluetooth: L2CAP socket layer initialized
    [ 0.023687] Bluetooth: SCO socket layer initialized
    [ 0.024089] Switched to clocksource arch_sys_counter
    [ 0.024102] cfg80211: Calling CRDA to update world regulatory domain
    [ 0.028447] thermal thermal_zone0: failed to read out thermal zone 0
    [ 0.028531] NET: Registered protocol family 2
    [ 0.028937] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.028954] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [ 0.028976] TCP: Hash tables configured (established 2048 bind 2048)
    [ 0.029009] TCP: reno registered
    [ 0.029016] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.029029] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.029156] NET: Registered protocol family 1
    [ 0.029382] RPC: Registered named UNIX socket transport module.
    [ 0.029387] RPC: Registered udp transport module.
    [ 0.029390] RPC: Registered tcp transport module.
    [ 0.029394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.029996] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.030347] bounce pool size: 64 pages
    [ 0.030866] NFS: Registering the id_resolver key type
    [ 0.030898] Key type id_resolver registered
    [ 0.030903] Key type id_legacy registered
    [ 0.030914] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [ 0.031043] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 0.031360] msgmni has been set to 462
    [ 0.032111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [ 0.032118] io scheduler noop registered
    [ 0.032136] io scheduler cfq registered (default)
    [ 0.032358] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [ 0.032633] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [ 0.098374] brcmstb_memc f1102000.memc-ddr: registered
    [ 0.098401] brcmstb_memc f1182000.memc-ddr: registered
    [ 0.098600] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.099428] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [ 0.195962] console [ttyS0] enabled
    [ 0.197213] loop: module loaded
    [ 0.197853] ahci brcmstb-ahci.0: can't get clock
    [ 0.198472] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [ 0.210103] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [ 0.211100] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
    [ 0.213733] scsi0 : ahci_platform
    [ 0.214367] scsi1 : ahci_platform
    [ 0.214869] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [ 0.215787] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [ 0.217225] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [ 0.217991] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [ 0.219129] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [ 0.219836] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [ 0.220570] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [ 0.221217] 5 ofpart partitions found on MTD device spi32766.0
    [ 0.221886] Creating 5 MTD partitions on "spi32766.0":
    [ 0.222485] 0x000000000000-0x000000200000 : "flash0.bolt"
    [ 0.223583] 0x000000200000-0x000000220000 : "flash0.nvram"
    [ 0.224623] 0x000000220000-0x000000240000 : "flash0.devtree"
    [ 0.225676] 0x000000240000-0x000001000000 : "flash0.recovery"
    [ 0.226744] 0x000000000000-0x000002000000 : "flash0"
    [ 0.228017] libphy: Fixed MDIO Bus: probed
    [ 0.228615] tun: Universal TUN/TAP device driver, 1.6
    [ 0.229204] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.230244] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [ 0.244094] libphy: bcmgenet MII bus: probed
    [ 0.264970] xhci-brcm: xHCI BRCM driver
    [ 0.265494] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [ 0.266166] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [ 0.267348] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [ 0.268193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.268973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.269808] usb usb1: Product: xHCI Host Controller
    [ 0.270375] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [ 0.271090] usb usb1: SerialNumber: f0471000.xhci_v2
    [ 0.271977] hub 1-0:1.0: USB hub found
    [ 0.272443] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [ 0.273372] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [ 0.274031] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [ 0.275052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [ 0.275844] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.276683] usb usb2: Product: xHCI Host Controller
    [ 0.277252] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [ 0.277961] usb usb2: SerialNumber: f0471000.xhci_v2
    [ 0.278808] hub 2-0:1.0: USB hub found
    [ 0.279269] hub 2-0:1.0: 2 ports detected
    [ 0.280037] ehci-brcm: EHCI BRCM driver
    [ 0.280562] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [ 0.281231] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [ 0.292248] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [ 0.298099] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [ 0.298906] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.299695] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.300529] usb usb3: Product: EHCI Host Controller
    [ 0.301097] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [ 0.301806] usb usb3: SerialNumber: f0470300.ehci_v2
    [ 0.302649] hub 3-0:1.0: USB hub found
    [ 0.303109] hub 3-0:1.0: 1 port detected
    [ 0.303752] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [ 0.304421] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [ 0.315418] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [ 0.322096] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [ 0.322901] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.323690] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.324524] usb usb4: Product: EHCI Host Controller
    [ 0.325091] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [ 0.325801] usb usb4: SerialNumber: f0470500.ehci_v2
    [ 0.326633] hub 4-0:1.0: USB hub found
    [ 0.327094] hub 4-0:1.0: 1 port detected
    [ 0.327785] ohci-brcm: OHCI BRCM driver
    [ 0.328287] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [ 0.328946] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [ 0.329868] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [ 0.385210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [ 0.385990] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.386826] usb usb5: Product: BRCM OHCI controller
    [ 0.387393] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [ 0.388108] usb usb5: SerialNumber: f0470400.ohci_v2
    [ 0.388955] hub 5-0:1.0: USB hub found
    [ 0.389427] hub 5-0:1.0: 1 port detected
    [ 0.390091] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [ 0.390754] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [ 0.391675] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [ 0.447196] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [ 0.447976] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.448811] usb usb6: Product: BRCM OHCI controller
    [ 0.449379] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [ 0.450094] usb usb6: SerialNumber: f0470600.ohci_v2
    [ 0.450922] hub 6-0:1.0: USB hub found
    [ 0.451389] hub 6-0:1.0: 1 port detected
    [ 0.452088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.452837] ehci-pci: EHCI PCI platform driver
    [ 0.453392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.454111] ohci-pci: OHCI PCI platform driver
    [ 0.454739] usbcore: registered new interface driver usb-storage
    [ 0.455442] i2c /dev entries driver
    [ 0.455892] lirc_dev: IR Remote Control driver registered, major 250
    [ 0.456942] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [ 0.457914] usbcore: registered new interface driver btusb
    [ 0.458608] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [ 0.459427] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [ 0.460355] sdhci: Secure Digital Host Controller Interface driver
    [ 0.461063] sdhci: Copyright(c) Pierre Ossman
    [ 0.461572] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 0.463325] mmc0: no vqmmc regulator found
    [ 0.463799] mmc0: no vmmc regulator found
    [ 0.494099] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [ 0.496006] mmc1: no vqmmc regulator found
    [ 0.496485] mmc1: no vmmc regulator found
    [ 0.527092] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [ 0.528032] hidraw: raw HID events driver (C) Jiri Kosina
    [ 0.528744] usbcore: registered new interface driver usbhid
    [ 0.529390] usbhid: USB HID core driver
    [ 0.531832] TCP: cubic registered
    [ 0.532845] NET: Registered protocol family 10
    [ 0.533833] NET: Registered protocol family 17
    [ 0.534571] Bluetooth: RFCOMM TTY layer initialized
    [ 0.535154] Bluetooth: RFCOMM socket layer initialized
    [ 0.535744] Bluetooth: RFCOMM ver 1.11
    [ 0.536182] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 0.536792] Bluetooth: BNEP filters: protocol multicast
    [ 0.537400] Bluetooth: BNEP socket layer initialized
    [ 0.537970] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [ 0.538657] Bluetooth: HIDP socket layer initialized
    [ 0.539275] l2tp_core: L2TP core driver, V2.0
    [ 0.539800] Key type dns_resolver registered
    [ 0.540368] Registering SWP/SWPB emulation handler
    [ 0.541229] regulator-dummy: disabling
    [ 0.541915] ALSA device list:
    [ 0.542282] No soundcards found.
    [ 0.542898] Waiting for root device /dev/mmcblk0p2...
    ^C[ 0.602734] mmc1: BKOPS_EN bit is not set
    [ 0.609432] mmc1: new high speed MMC card at address 0001
    [ 0.610262] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    [ 0.610884] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [ 0.611667] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [ 0.612433] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [ 0.616433] mmcblk0: p1 p2 p3
    [ 0.619182] mmcblk0boot1: unknown partition table
    [ 0.620210] mmcblk0boot0: unknown partition table
    [ 0.645410] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
    [ 0.646264] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
    [ 0.680653] EXT4-fs (mmcblk0p2): recovery complete
    [ 0.681790] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.682751] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
    [ 0.684855] devtmpfs: mounted
    [ 0.798747] random: systemd: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
    [ 0.803354] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [ 0.805678] systemd[1]: Detected architecture arm.



    Welcome to opendreambox 2.5.0!



    [ 0.812624] systemd[1]: Set hostname to <dm900>.
    [ 0.826237] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
    [ 0.840034] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
    [ 0.841726] systemd-fstab-generator[79]: Checking was requested for "rootfs", but it is not a device.
    [ 0.849204] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [ 0.850376] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [ 0.851705] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [ 0.852899] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [ 0.854196] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [ 0.859886] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
    [ 0.863754] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
    [ 0.923826] systemd[1]: Set up automount media-hdd1.automount.
    [ OK ] Set up automount media-hdd1.automount.
    [ 0.927203] systemd[1]: Reached target Host and Network Name Lookups.
    [ OK ] Reached target Host and Network Name Lookups.
    [ 0.930783] systemd[1]: Set up automount data.automount.
    [ OK ] Set up automount data.automount.
    [ 0.933161] systemd[1]: Reached target Swap.
    [ OK ] Reached target Swap.
    [ 0.935294] systemd[1]: Listening on Journal Socket.
    [ OK ] Listening on Journal Socket.
    [ 0.938498] systemd[1]: Created slice User and Session Slice.
    [ OK ] Created slice User and Session Slice.
    [ 0.941314] systemd[1]: Created slice System Slice.
    [ OK ] Created slice System Slice.
    [ 0.944313] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [ OK ] Created slice system-serial\x2dgetty.slice.
    [ 0.947275] systemd[1]: Reached target Slices.
    [ OK ] Reached target Slices.
    [ 0.954886] systemd[1]: Starting Load Kernel Modules...
    Starting Load Kernel Modules...
    [ 0.956314] systemd[1]: Reached target Paths.
    [ OK ] Reached target Paths.
    [ 0.959425] systemd[1]: Listening on Journal Socket (/dev/log).
    [ OK ] Listening on Journal Socket (/dev/log).
    [ 0.963835] systemd[1]: Starting Journal Service...
    Starting Journal Service...
    [ 0.966462] systemd[1]: Listening on udev Control Socket.
    [ OK ] Listening on udev Control Socket.
    [ 0.970722] systemd[1]: Starting Setup Virtual Console...
    Starting Setup Virtual Console...
    [ 0.974716] systemd[1]: Mounting POSIX Message Queue File System...
    Mounting POSIX Message Queue File System...
    [ 0.977699] stb_core: module license 'Proprietary' taints kernel.
    [ 0.978422] Disabling lock debugging due to kernel taint
    [ 0.979760] systemd[1]: Listening on udev Kernel Socket.
    [ OK ] Listening on udev Kernel Socket.
    [ 0.985256] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    Starting Create list of required st... nodes for the current kernel...
    [ 0.991052] systemd[1]: Starting Remount Root and Kernel File Systems...
    Starting Remount Root and Kernel File Systems...
    [ 0.998352] systemd[1]: Mounted POSIX Message Queue File System.
    [ OK ] Mounted POSIX Message Queue File System.
    [ 1.003697] input: dreambox remote control (native) as /devices/virtual/input/input0
    [ 1.004526] systemd[1]: Started Setup Virtual Console.
    [ 1.005615] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [ OK ] Started Setup Virtual Console.
    [ 1.016261] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ OK ] Started Create list of required sta...ce nodes for the current kernel.
    [ 1.048055] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
    [ 1.051866] systemd[1]: Started Remount Root and Kernel File Systems.
    [ OK ] Started Remount Root and Kernel File Systems.
    [ 1.069571] systemd[1]: Starting udev Coldplug all Devices...
    Starting udev Coldplug all Devices...
    [ 1.073758] systemd[1]: Starting Create Static Device Nodes in /dev...
    Starting Create Static Device Nodes in /dev...
    [ 1.081350] systemd[1]: Started Journal Service.
    [ OK ] Started Journal Service.
    Starting Flush Journal to Persistent Storage...
    [ OK ] Started udev Coldplug all Devices.
    [ 1.224777] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20170722-dm900-10-g1dc7d
    [ 1.225751] systemd-journald[82]: Received request to flush runtime journal from PID 1
    [ OK ] Started Flush Journal to Persistent Storage.
    [ OK ] Started Create Static Device Nodes in /dev.
    Starting udev Kernel Device Manager...
    [ OK ] Reached target Local File Systems (Pre).
    Mounting /tmp...
    Mounting /var/volatile...
    [ OK ] Mounted /tmp.
    [ OK ] Mounted /var/volatile.
    Starting Load/Save Random Seed...
    [ OK ] Reached target Local File Systems.
    Starting Create Volatile Files and Directories...
    [ OK ] Started Load/Save Random Seed.
    [ OK ] Started Create Volatile Files and Directories.
    Starting Update UTMP about System Boot/Shutdown...
    Starting RPC bind portmap service...
    [ 1.326120] random: nonblocking pool is initialized
    [ OK ] Started udev Kernel Device Manager.
    [ OK ] Started Update UTMP about System Boot/Shutdown.
    [ OK ] Started RPC bind portmap service.
    [ OK ] Reached target Remote File Systems (Pre).
    [ OK ] Reached target Remote File Systems.
    [ OK ] Found device /dev/ttyS0.
    [ OK ] Found device /dev/tpm0.
    [ 1.843430] 1:842348477 SMCB: controller reset timed out
    [ OK ] Found device /dev/sci0.
    [ 2.170107] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.171680] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OACY0, max UDMA/133
    [ 2.172470] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.174208] ata1.00: configured for UDMA/133
    [ 2.174923] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
    [ 2.176712] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.177609] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.179386] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.180044] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.212294] register adapter
    [ 2.212872] register adapter
    [ 2.213420] register adapter
    [ 2.213935] register adapter
    [ 2.214491] register adapter
    [ 2.215045] FP did not respond
    [ 2.215577] input: dreambox front panel as /devices/virtual/input/input2
    [ 2.219121] HDMI: CEC start ... state is now 1
    [ 2.219904] set input to 0
    [ 2.220248] set fb to 2(-1)
    [ 2.222662] startvideomode '1080p' read from /etc/videomode
    [ 2.223797] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 2.238394] sda: sda1 sda2
    [ 2.239761] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.287106] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.291821] HDMI: ignore false positive disconnect!
    [ 2.292410] HDMI: now powered down
    [ 2.292807] HDMI: Unable to retrieve Rx EDID info.. no rx device
    [ 2.293514] using 60.00Hz as MonitorRefreshRate
    [ 2.294037] SET FORMAT: display[0], format='1080p'
    [ 2.294712] HDMI: CEC use logical address 3
    [ 2.295268] HDMI: CEC init completed... state is now 3!
    [ 2.434546] HDMI: CEC send ok!
    [ OK ] Found device HGST_HTS545050A7E380 dreambox-storage.
    [ 2.675641] VIDEO0: enable deinterlacer
    [ 2.676318] VIDEO0: set fallback framerate to 60000
    [ 2.676891] VIDEO0: set progressive override mode to 1
    [ 2.677527] VIDEO0: set streamtype!
    [ 2.677941] -> set MPEG2
    [ 2.678313] -> sw rave disabled!
    Mounting /media/hdd...
    [ 2.763602] VIDEO1: set fallback framerate to 60000
    [ 2.764207] VIDEO1: set progressive override mode to 1
    [ 2.764801] VIDEO1: set streamtype!
    [ 2.765224] -> set MPEG2
    [ 2.765567] -> sw rave disabled!
    [ 2.801602] VIDEO2: set fallback framerate to 60000
    [ 2.802200] VIDEO2: set progressive override mode to 1
    [ 2.802795] VIDEO2: set streamtype!
    [ 2.803215] -> set MPEG2
    [ 2.803559] -> sw rave disabled!
    [ 2.818402] set ac3 to downmix
    [ 2.818767] set wmapro to downmix
    [ 2.819191] set ac3plus to use_hdmi_caps
    [ 2.819654] set dtshd to force_dts
    [ 2.820051] set aac to downmix
    [ 2.820785] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [ 2.821653] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [ 2.822634] DVB: registering new adapter (BCM7439)
    [ OK ] Found device /dev/dvb/adapter0/ca0.
    [ OK ] Found device /dev/dvb/adapter0/demux0.
    [ 2.898683] EXT4-fs (sda1): recovery complete
    [ 2.899235] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ OK ] Mounted /media/hdd.
    [ 2.913077] autodetecting NIMs...
    [ OK ] Found device /dev/dvb/adapter0/video0.
    Starting Dreambox Bootlogo...
    [ OK ] Started Dreambox Bootlogo.
    [ 2.955040] VIDEO0: set blank to 0
    [ 2.955650] sync0 is off so we enable it
    [ 2.956124] sync0: allocated pcroffset 0
    [ 2.956581] sync0: playback!
    [ 2.956929] VIDEO0: total delay: 0 (0 ms)
    [ 2.962288] VIDEO0: start decode
    [ 2.962675] VIDEO0: flush video decoder
    [ 2.963137] VIDEO0 got pts failed !!!! (ret 0)
    [ 3.008236] VIDEO0: first pts 0x0
    [ 3.008641] VIDEO0: EOTF changed to SDR
    [ 3.009093] VIDEO0: framerate changed 3
    [ 3.009538] VIDEO0: resolution changed (1920 1080)
    [ 3.010092] VIDEO0: aspect changed 3
    [ 3.010665] set current avs auto aspect to 16:9
    [ 3.011230] set current avs auto aspect to 16:9
    [ 3.011775] set sb to 3(1)
    [ 3.131431] VIDEO0: stop decode
    [ 3.131802] sync0 1fff no decoder left in sync handling so disable
    [ 3.132521] sync0: was last pcroffset0 user so free it
    [ 3.425097] Found: Slot 0, ID: 19 (by CA)
    [ 3.425565] Initializing adapter 0 (Si2166B-DVB-S2)
    [ 3.430976] fe_common: retrying i2c transfer at adapter 4 (0xa)
    [ 3.432425] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166B)...
    [ 3.433454] Initializing adapter 1 (Si2166B-DVB-S2)
    [ 3.437341] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166B)...
    [ 3.439480] CI stopped...
    [ 3.439984] init ALSA!
    [ 3.442976] registered vtuner misc/vtuner0, minor 50
    [ 3.443808] registered vtuner misc/vtuner1, minor 49
    [ 3.447406] registered vtuner misc/vtuner2, minor 48
    [ 3.448279] registered vtuner misc/vtuner3, minor 47
    [ 3.448861] HDMI-RX: init
    [ 3.449986] HDMI-RX: no device attached
    [ 3.450499] HDMI-RX: video format change event
    [ 3.451011] HDMI-RX: hdmi packet status stopped
    [ 3.451550] HDMI-RX: hdmiInput0 Receiving DVI format
    [ 3.452153] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [ 3.452871] HDMI-RX: init done
    [ 3.453240] bcm_vce_init()
    [ 3.453557] bcm_vce_init() 0
    [ OK ] Reached target Sound Card.
    [ 3.477861] vice0: allocate output buffers
    [ OK ] Found device /dev/venc0.
    [ 3.486640] input: dreambox ir keyboard as /devices/virtual/input/input3
    [ 3.488295] input: dreambox ir mouse as /devices/virtual/input/input4
    [ 3.503266] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ OK ] Started Load Kernel Modules.
    Starting Apply Kernel Variables...
    Mounting NFSD configuration filesystem...
    [ OK ] Mounted NFSD configuration filesystem.
    [ OK ] Started Apply Kernel Variables.
    [ OK ] Reached target System Initialization.
    [ OK ] Listening on busybox-telnetd.socket.
    [ OK ] Listening on dropbear.socket.
    [ OK ] Started Daily Cleanup of Temporary Directories.
    [ OK ] Reached target Timers.
    [ OK ] Listening on D-Bus System Message Bus Socket.
    [ OK ] Listening on streamproxy.socket.
    [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
    [ OK ] Listening on tpmd.socket.
    [ OK ] Listening on dbttcd.socket.
    [ OK ] Listening on vsftpd.socket.
    [ OK ] Reached target Sockets.
    [ OK ] Reached target Basic System.
    Starting Avahi mDNS/DNS-SD Stack...
    Starting Dreambox CI Plus...
    [ OK ] Started D-Bus System Message Bus.
    [ OK ] Started Avahi mDNS/DNS-SD Stack.
    Starting Connection service...
    Starting dbttcd.service...
    Starting tpmd.service...
    Starting Login Service...
    Starting Dreambox Real-Time Streaming Protocol Server...
    [ OK ] Started Serial Getty on ttyS0.
    [ OK ] Reached target Login Prompts.
    [ OK ] Started Login Service.
    [ OK ] Started Connection service.
    [ OK ] Reached target Network.
    [ OK ] Started NFS status monitor for NFSv2/3 locking..
    [ OK ] Started NFS Mount Daemon.
    Starting NFS server and services...
    Starting Wait for network to be configured by ConnMan...
    Starting WPA supplicant...
    [ 4.117632] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 4.119740] NFSD: starting 90-second grace period (net c07fd700)
    [ OK ] Started NFS server and services.
    Starting Hostname Service...
    [ 4.195114] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [ 4.201030] f0b00000.ethernet: configuring instance for internal PHY
    [ 4.201889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ OK ] Started tpmd.service.
    [ OK ] Started WPA supplicant.
    [ OK ] Started Hostname Service.
    [ OK ] Started Dreambox Real-Time Streaming Protocol Server.
    [ 4.313300] vice0: change videoenc bitrate to 2048000 bits/s
    [ 4.313995] vice0: change gop length to 0ms
    [ 4.314558] vice0: change b-frames to 2
    [ 4.315038] vice0: change p-frames to 1
    [ 4.315528] vice0: allow new gop on new scene off
    [ 4.316121] vice0: change open gop to off
    [ 4.316647] vice0: change to 0 slices per pic
    [ 4.317204] vice0: change h264 level to 1.1
    [ 4.317718] vice0: change h264 profile to main
    [ 4.318500] change audioenc bitrate to 128000 bits/s
    [ OK ] Started dbttcd.service.
    [ 6.203199] libphy: f0b00000.etherne:01 - Link is Down
    [ OK ] Started Dreambox CI Plus.
    Starting Generate environment for enigma2...
    [ OK ] Started Generate environment for enigma2.
    Starting enigma2...
    [ 8.589303] si2166b(0): voltage is disabled now
    [ 8.591134] si2166b(0): voltage is disabled now
    [ 8.594112] si2166b(1): voltage is disabled now
    [ 8.595670] si2166b(1): voltage is disabled now
    [ 8.597283] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [ 8.598272] HDMI: CEC set devtype to 0
    [ 8.598710] HDMI: CEC start ... state is now 1
    [ 8.599258] HDMI: CEC returned state 1
    [ 8.599691] HDMI: CEC state now 801
    [ 8.662146] HDMI: CEC use logical address 3
    [ 8.662648] HDMI: CEC init completed... state is now 3!
    [ 8.674036] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [ 8.798977] HDMI: CEC send ok!
    [ 8.907357] 0 ms:
    [ 8.940858] 33 ms: 0
    [ 8.944264] 3 ms: 0
    [ 8.947342] 3 ms: 0
    [ 9.319595] 372 ms: 0
    [ 9.339378] 20 ms: 0
    [ 9.345438] 6 ms: 0
    [ 9.346562] 1 ms: 0
    [ 9.352408] 6 ms: 0
    [ 9.439929] 87 ms: 0
    [ 9.460889] 20 ms: 0
    [ 9.463629] 2 ms: 0
    [ 9.464710] 1 ms: 0
    [ 9.466171] 1 ms: 0



    opendreambox 2.5.0 dm900 ttyS0



    dm900 login: [ 10.203613] 737 ms: 0
    [ 10.205173] 2 ms: 1
    [ 10.256328] 51 ms: 1
    [ 10.257478] 1 ms: 1
    [ 10.275412] 18 ms: 1
    [ 10.323189] 48 ms: 1
    [ 10.324361] 1 ms: 1
    [ 10.327830] 3 ms: 1
    [ 10.328917] 0 ms: 1
    [ 10.330053] 0 ms: 1
    [ 10.332359] 2 ms: 1
    [ 10.336866] 4 ms: 1
    [ 10.342196] 5 ms: 1



    opendreambox 2.5.0 dm900 ttyS0



    dm900 login: root
    .-------------------------------------------------------.
    | _____ .__ .__ _____ |
    | / \ ___________| | |__| ____ / | | |
    | / \ / \_/ __ \_ __ \ | | |/ \ / | |_ |
    | / Y \ ___/| | \/ |_| | | \/ ^ / |
    | \____|__ /\___ >__| |____/__|___| /\____ | |
    | \/ \/ \/ |__| |
    | www.dreambox-tools.info |
    +-------------------------------------------------------+
    type 'help' for a list of commands
    root@dm900:~# ip link show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP8000> mtu 1500 qdisc mq qlen 1000
    link/ether 00:09:34:42:69:38 brd ff:ff:ff:ff:ff:ff
    root@dm900:~# ifconfig eth0 -auto
    ifconfig: bad address '-auto'
    root@dm900:~# ifconfig eth0
    eth0 Link encap:Ethernet HWaddr 00:09:34:42:69:38
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



    root@dm900:~# ifconfig eth0 192.168.2.5
    root@dm900:~# ifconfig eth0
    eth0 Link encap:Ethernet HWaddr 00:09:34:42:69:38
    inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



    root@dm900:~# ifup eth0
    ifup: can't open '/etc/network/interfaces': No such file or directory
    root@dm900:~# [ 100.580250] 90238 ms: 1
    [ 100.586776] 6 ms: 97
    [ 100.590111] 4 ms: 97
    [ 100.595600] 5 ms: 97
    [ 100.600116] 5 ms: 97
    [ 100.604952] 4 ms: 97
    [ 100.606182] 1 ms: 97
    [ 100.607671] 1 ms: 97
    [ 100.610731] 3 ms: 97
    [ 100.963475] 353 ms: 97
    [ 100.982920] 19 ms: 98
    [ 102.013828] 1030 ms: 98
    [ 102.031143] 17 ms: 99
    [ 102.032308] 1 ms: 99
    [ 102.044319] 12 ms: 99
    [ 102.045508] 1 ms: 99
    [ 102.046748] 1 ms: 99
    [ 102.049112] 3 ms: 99
    [ 102.052729] 3 ms: 99
    [ 102.059355] 7 ms: 99
    [ 102.060761] 1 ms: 99
    [ 102.076040] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [ 102.127512] 67 ms: 99
    [ 102.212368] 85 ms: 99
    [ 102.214939] set input to 0
    [ 102.215287] set fb to 2(-1)
    [ 102.215619] set current avs auto aspect to 16:9
    [ 102.216177] set sb to 3(1)
    [ 102.217145] set ac3 to downmix
    [ 102.217879] set ac3plus to use_hdmi_caps
    [ 102.259299] using 60.00Hz as MonitorRefreshRate
    [ 102.259831] VIDEO1: shared window not available
    [ 102.260402] SET FORMAT: display[0], format='1080p'
    [ 102.260961] VIDEO1: shared window not available
    [ 102.375923] set current avs auto aspect to 16:9
    [ 102.376533] set sb to 3(1)
    [ 102.459285] using 60.00Hz as MonitorRefreshRate
    [ 102.459814] VIDEO1: shared window not available
    [ 102.460380] SET FORMAT: display[0], format='1080p'
    [ 102.460939] VIDEO1: shared window not available
    [ 102.575925] set current avs auto aspect to 16:9
    [ 102.576527] set sb to 3(1)
    [ 102.577267] 365 ms: 99
    [ 102.580038] 2 ms: 99
    [ 102.583251] 3 ms: 99
    [ 102.610977] 27 ms: 99
    [ 102.614613] 3 ms: 100
    [ 103.079027] systemd-fstab-generator[341]: Checking was requested for "rootfs", but it is not a device.



    root@dm900:~#

  • Ja, der Empfänger ist eine Box 900. Ja, das Bild wird auf dem Fernseher angezeigt, der Fernseher funktioniert, ich kann es mit der Fernbedienung steuern. Ich verbinde den Empfänger über den Port mit dem Router. Router-Router 192.168.2.1. Ich ordne den Empfänger zwangsweise 192.168.2.5 zu - es funktioniert nicht. Es gibt keinen Link. Die Einstellungen sind alle korrekt. Im Moment verbinde ich mich über den WLAN-Adapter asus. Aber nach 5-10 Minuten kann ich keine Verbindung zum Empfänger herstellen

  • @ksnksn: Mich wundert, dass du auf Kommandozeilenebene versuchst, die LAN-Schnittstelle zu konfigurieren (ifconfig eth0 192.168.2.5). Die Netzwerkkonfiguration sollte man über die Benutzerschnittstelle der Dreambox vornehmen (Menu / Einstellungen / Netzwerk / Netzwerkeinstellungen ...). Hast du dort etwas eingestellt? Wenn nicht, solltest du das nachholen. Wenn ja, wäre ein Screenshot der Einstellungen hilfreich. Auch wären interessant die Ausgaben von "netstat -r" und "ifconfig -a" (bzw. "ip route show" und "ip addr show") auf Kommandozeilenebene nach einem Neustart der Box.

    Edited 2 times, last by Satory ().

  • @ksnksn: Mich wundert, dass du auf Kommandozeilenebene versuchst, die LAN-Schnittstelle zu konfigurieren (ifconfig eth0 192.168.2.5). Die Netzwerkkonfiguration sollte man über die Benutzerschnittstelle der Dreambox vornehmen (Menu / Einstellungen / Netzwerk / Netzwerkeinstellungen ...). Hast du dort etwas eingestellt? Wenn nicht, solltest du das nachholen. Wenn ja, wäre ein Screenshot der Einstellungen hilfreich. Auch wären interessant die Ausgaben von "netstat -r" und "ifconfig -a" (bzw. "ip route show" und "ip addr show") auf Kommandozeilenebene nach einem Neustart der Box.

    Ich würde mich freuen, aber ich sehe die Parameter der Kabelverbindung nicht, die Screenshots unten. Im Moment, wie ich oben schrieb, sitze ich durch einen WLAN-Adapter.Deshalb habe ich versucht, die IP-Adresse zu erzwingen.
    Vielleicht wird ein Dienst nicht geladen, der für das Verbinden von LAN zuständig ist?


    Nach Eingabe der Befehle füge ich das Protokoll anNach Eingabe der Befehle füge ich das Protokoll an:type 'help' for a list of commands
    root@dm900:~# netstat -r
    Kernel IP routing table
    Destination Gateway Genmask Flags MSS Window irtt Iface
    root@dm900:~# ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:09:34:42:69:38
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1%1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:338 errors:0 dropped:0 overruns:0 frame:0
    TX packets:338 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:114557 (111.8 KiB) TX bytes:114557 (111.8 KiB)
    root@dm900:~# ip route show
    root@dm900:~# ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP8000> mtu 1500 qdisc mq qlen 1000
    link/ether 00:09:34:42:69:38 brd ff:ff:ff:ff:ff:ff
    root@dm900:~# ifconffig eth0 192.168.2.5
    -bash: ifconffig: command not found
    root@dm900:~# ifconfig eth0 192.168.2.5
    root@dm900:~# ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP8000> mtu 1500 qdisc mq qlen 1000
    link/ether 00:09:34:42:69:38 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.5/24 brd 192.168.2.255 scope global eth0
    valid_lft forever preferred_lft forever
    root@dm900:~#

  • @ksnksn: Für Wired wird im Screenshot gar keine IP Adresse angezeigt. Das müsste so ähnlich aussehen wie in den angehängten Screenshots. Vom ersten auf den zweiten Screen kommt man durch Drücken der gelben Taste. Wie ist das bei deiner DM900 eingesetellt?

  • Ich habe das Video genommen, wo ich sehen kann, dass den farbigen Tasten keine Funktionen zugewiesen sind. Das Patchkabel ist in den Lan-Port eingesteckt, es gibt keine Verbindung, es ist sichtbar. Vielleicht startet ein Dienst nicht im Empfänger?

  • @ksnksn: Das sieht so aus, als wäre die Installation nicht vollständig. Es fehlen auch die Beschriftungen der Schaltflächen auf dem Screen (rot: Zurücksetzen, gelb: IP, blau: DNS). Auf Grund der nicht funktionierenden Netzwerkverbindung kannst du das Image auch nicht neu flashen. Vielleicht hilft der Vorschlag von Keine IP über DHCP weiter.


    Ich verstehe das so, dass zusätzlich zur IP Adresse auch manuell das Default Gateway und ein Nameserver eintragen werden muss. Dann müsste die Netzwerkverbindung zustande kommen:


    ifdown eth0
    ifconfig eth0 192.168.2.5 netmask 255.255.255.0 up
    route add default gw 192.168.2.1
    und den DNS Server manuell setzen, falls kein DNS Server in /etc/resolv.conf hinterlegt ist:
    echo -e "nameserver 192.168.2.1\nnameserver 8.8.8.8" > /etc/resolv.conf

  • Ich füge das Protokoll Nr. 1 bei. Der Empfänger ist eingeschaltet, im Betrieb:



    root@dm900~# root
    -bash root command not found
    root@dm900~# clear
    root@dm900~# ifconfig
    eth0 Link encapEthernet HWaddr 000934426938
    UP BROADCAST MULTICAST MTU1500 Metric1
    RX packets0 errors0 dropped0 overruns0 frame0
    TX packets0 errors0 dropped0 overruns0 carrier0
    collisions0 txqueuelen1000
    RX bytes0 (0.0 B) TX bytes0 (0.0 B)



    lo Link encapLocal Loopback
    inet addr127.0.0.1 Mask255.0.0.0
    inet6 addr 1%1128 ScopeHost
    UP LOOPBACK RUNNING MTU65536 Metric1
    RX packets349 errors0 dropped0 overruns0 frame0
    TX packets349 errors0 dropped0 overruns0 carrier0
    collisions0 txqueuelen0
    RX bytes115408 (112.7 KiB) TX bytes115408 (112.7 KiB)



    root@dm900~# ifdown eth0
    ifdown can't open 'etcnetworkinterfaces' No such file or directory
    root@dm900~# ^C
    root@dm900~#


    Das heißt, die Schnittstelle ist nicht in den Konfigurationsschnittstellen konfiguriert. Womit kann es verbunden werden?




    Protokoll Nr. 2. Übertragen Sie den Empfänger in den Rettungsmodus:dm900 login: root
    login[395]: root login on 'ttyS0'
    root@dm900:~# ifdown eth0
    root@dm900:~# ifconfig eth0 192.168.2.55 netmask 255.255.255.0 up
    [ 47.398955] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    root@dm900:~# [ 49.403245] libphy: f0b00000.etherne:01 - Link is Down
    root@dm900:~# route add default gw 192.168.2.1
    root@dm900:~# echo -e "nameserver 192.168.2.1\nameserver 8.8.8.8"> /etc/resolv.conf
    root@dm900:~# ifconfig eth0
    eth0 Link encap:Ethernet HWaddr 00:09:34:42:69:38
    inet addr:192.168.2.55 Bcast:192.168.2.255 Mask:255.255.255.0
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



    root@dm900:~#

  • [ 47.398955] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    root@dm900:~# [ 49.403245] libphy: f0b00000.etherne:01 - Link is Down

    Nein, keine Ping
    Link ist nicht da, auf einem breiten Graben ist es sichtbar
    Also frage ich, es stellt sich heraus, dass die Schnittstelle nicht in Config Interfaxes registriert ist? Der Daemon ist für Netzwerkverbindungen zuständig, schließlich startet er vielleicht nicht richtig, oder?

  • @ksnksn: Die Ausgabe von 'ifconfig eth0' am Schluss sieht doch gut aus. Außerdem nutzt du IPv6 nicht. ping 127.0.0.1 müsste eigentlich immer funktionieren, wie auch ping auf die eigene IP Adresse, also 192.168.2.55, dazu muss nicht mal ein Kabel angeschlossen sein.
    So langsam gehen mir die Ideen aus. Liegt vielleicht ein Hardwaredefekt vor? Hast du noch Garantie auf der Box, so dass ein Umtausch möglich ist?