tvheadend scant nicht auf 7080, 820 funzt

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • tvheadend scant nicht auf 7080, 820 funzt

      Hallo,

      ich besitze eine DM820 und eine DM7080 (Sat mit zus. Dual Sat).

      tvheadend funktioniert tadellos auf der 820. Auf der 7080 sieht's anders aus: tvheadend kann keinen Signal bekommen; endet den Scan mit "POLL Timeout" bzw. "No data".

      In der 7080'er sind insgesamt vier Tuner eingebaut. Die zwei Serienmässige SatTuner und einen Dual SatTuner. Allerdings werden im tvheadend insgesamt 6 Tuner angezeigt: Die 4x Sat und 2x Terrestrial. Ich habe aber keine T-Tuner eingebaut !?

      Daher habe einen command line scan mit dem gleichen Ergebnis durchgeführt: 820 funktioniert, 7080 nicht. Resultate sind unten aufgeführt.

      Mit femon werden bei beiden Boxen die gleiche Status, Signalstärke und SNR angezeigt. Beide Boxen sitzen hinter einem Multiswitch. Um einen Defekt auszuschliessen, hatte ich die Boxen mehrmals umgehängt.

      Obwohl die Boxen Baugleich (bis auf die Steckplätze) sind, sind die Module bcm4506 und bcm7435 unterschiedlich gross.

      Quellcode

      1. root@dm820:~$ lsmod
      2. Module Size Used by
      3. bcm7435 7862383 3
      4. bcm4506 29058 1 bcm7435
      5. ========================================
      6. root@dm7080:~$ lsmod
      7. Module Size Used by
      8. bcm7435 8453205 3
      9. bcm4506 91786 1 bcm7435
      Alles anzeigen



      Frage:
      Wieso finden die PID-Filter des Scans bei der 7080 keine Daten?

      Quellcode

      1. root@dm820:~$ femon -H
      2. FE: bcm4506 (DVBS)
      3. status | signal 0% | snr 0% | ber 0 | unc 0 |
      4. status | signal 0% | snr 0% | ber 0 | unc 0 |
      5. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      6. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      7. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      8. status SCVYL | signal 29% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      9. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      10. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      11. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      12. status SCVYL | signal 29% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      13. status | signal 30% | snr 2% | ber 0 | unc 0 |
      14. status S | signal 25% | snr 1% | ber 0 | unc 0 |
      15. status S | signal 29% | snr 2% | ber 0 | unc 0 |
      16. status S | signal 30% | snr 2% | ber 0 | unc 0 |
      17. status S | signal 30% | snr 2% | ber 0 | unc 0 |
      18. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      19. status SCVYL | signal 31% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      20. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      21. status SCVYL | signal 31% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      22. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      23. status SCVYL | signal 31% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      24. status SCVYL | signal 30% | snr 4% | ber 0 | unc 0 | FE_HAS_LOCK
      25. status | signal 30% | snr 4% | ber 0 | unc 0 |
      Alles anzeigen


      Quellcode

      1. root@dm820:~$ scan -vvvv /usr/share/dvb/dvb-s/Astra-19.2E
      2. scanning /usr/share/dvb/dvb-s/Astra-19.2E
      3. using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
      4. initial transponder 12551500 V 22000000 5
      5. >>> tune to: 12551:v:0:22000
      6. DiSEqC: switch pos 0, 13V, hiband (index 2)
      7. diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00
      8. DVB-S IF freq is 1951500
      9. >>> tuning status == 0x1f
      10. add_filter:1791: add filter pid 0x0000
      11. start_filter:1731: start filter pid 0x0000 table_id 0x00
      12. update_poll_fds:1711: poll fd 4
      13. add_filter:1791: add filter pid 0x0011
      14. start_filter:1731: start filter pid 0x0011 table_id 0x42
      15. update_poll_fds:1711: poll fd 5
      16. update_poll_fds:1711: poll fd 4
      17. add_filter:1791: add filter pid 0x0010
      18. start_filter:1731: start filter pid 0x0010 table_id 0x40
      19. update_poll_fds:1711: poll fd 6
      20. update_poll_fds:1711: poll fd 5
      21. update_poll_fds:1711: poll fd 4
      22. parse_section:1574: pid 0x00 tid 0x00 table_id_ext 0x0454, 0/0 (version 2)
      23. PAT
      24. <ab hier kommt eine Menge mehr Daten>
      Alles anzeigen


      Quellcode

      1. root@dm7080:~$ femon -H -f 1
      2. FE: bcm4506 (DVBS)
      3. status | signal 44% | snr 14% | ber 0 | unc 0 |
      4. status | signal 44% | snr 14% | ber 0 | unc 0 |
      5. status | signal 44% | snr 14% | ber 0 | unc 0 |
      6. status | signal 44% | snr 14% | ber 0 | unc 0 |
      7. status | signal 44% | snr 14% | ber 0 | unc 0 |
      8. status | signal 44% | snr 14% | ber 0 | unc 0 |
      9. status SCVYL | signal 30% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      10. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      11. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      12. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      13. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      14. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      15. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      16. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      17. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      18. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      19. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      20. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      21. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      22. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      23. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      24. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      25. status SCVYL | signal 29% | snr 5% | ber 0 | unc 0 | FE_HAS_LOCK
      26. status S | signal 32% | snr 0% | ber 0 | unc 0 |
      27. status S | signal 30% | snr 0% | ber 0 | unc 0 |
      28. status S | signal 31% | snr 0% | ber 0 | unc 0 |
      29. status S | signal 30% | snr 0% | ber 0 | unc 0 |
      30. status S | signal 30% | snr 0% | ber 0 | unc 0 |
      31. status S | signal 31% | snr 0% | ber 0 | unc 0 |
      32. status S | signal 31% | snr 0% | ber 0 | unc 0 |
      33. status S | signal 32% | snr 0% | ber 0 | unc 0 |
      34. status S | signal 30% | snr 0% | ber 0 | unc 0 |
      35. status S | signal 31% | snr 0% | ber 0 | unc 0 |
      Alles anzeigen

      Quellcode

      1. root@dm7080:~$ scan -vvvv /usr/share/dvb/dvb-s/Astra-19.2E
      2. scanning /usr/share/dvb/dvb-s/Astra-19.2E
      3. using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
      4. initial transponder 12551500 V 22000000 5
      5. >>> tune to: 12551:v:0:22000
      6. DiSEqC: switch pos 0, 13V, hiband (index 2)
      7. diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00
      8. DVB-S IF freq is 1951500
      9. >>> tuning status == 0x1f
      10. add_filter:1791: add filter pid 0x0000
      11. start_filter:1731: start filter pid 0x0000 table_id 0x00
      12. update_poll_fds:1711: poll fd 4
      13. add_filter:1791: add filter pid 0x0011
      14. start_filter:1731: start filter pid 0x0011 table_id 0x42
      15. update_poll_fds:1711: poll fd 5
      16. update_poll_fds:1711: poll fd 4
      17. add_filter:1791: add filter pid 0x0010
      18. start_filter:1731: start filter pid 0x0010 table_id 0x40
      19. update_poll_fds:1711: poll fd 6
      20. update_poll_fds:1711: poll fd 5
      21. update_poll_fds:1711: poll fd 4
      22. WARNING: filter timeout pid 0x0011
      23. remove_filter:1799: remove filter pid 0x0011
      24. stop_filter:1777: stop filter pid 0x0011
      25. update_poll_fds:1711: poll fd 6
      26. update_poll_fds:1711: poll fd 4
      27. WARNING: filter timeout pid 0x0000
      28. remove_filter:1799: remove filter pid 0x0000
      29. stop_filter:1777: stop filter pid 0x0000
      30. update_poll_fds:1711: poll fd 6
      31. WARNING: filter timeout pid 0x0010
      32. remove_filter:1799: remove filter pid 0x0010
      33. stop_filter:1777: stop filter pid 0x0010
      34. dumping lists (0 services)
      35. Done.
      Alles anzeigen
    • Beim Tripple Hybrid Tuner (DM900) werden die Tuner richtig angezeigt, aber als SI2166D

      gruß pclin
      Die zwei Gemütszustände eines Programmierers
      0 ich hab keine Ahnung was ich hier mache
      1 ICH BIN GOTT
      ---
      DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      (Flash) DMM-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      ---
      AudioDSP: miniDSP 2x4 HD

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von pclin ()

    • Noch mit dem neuen Tunertreiber (git.opendreambox.org/?p=opendr…6757c54a8358f59f7cfa465de) ist ein Scan mit tvheadend nicht möglich. Das Tunen ist möglich, nur dass scheinbar keine Daten abgegriffen werden können.

      Quellcode

      1. 2017-07-05 02:49:32.001 mpegts: 12246V in Astra 28.2 O - tuning on Si2166B : DVB-S #0
      2. 2017-07-05 02:49:32.162 subscription: 0273: "keep" subscribing to mux "12246V", weight: 1, adapter: "Si2166B : DVB-S #0", network: "Astra 28.2 O", service: "Raw PID Subscription"
      3. 2017-07-05 02:49:32.162 subscription: 0272: "scan" subscribing to mux "12246V", weight: 5, adapter: "Si2166B : DVB-S #0", network: "Astra 28.2 O", service: "Raw PID Subscription"
      4. 2017-07-05 02:49:33.015 linuxdvb: Si2166B : DVB-S #0 - poll TIMEOUT
      5. 2017-07-05 02:49:33.264 linuxdvb: Si2166B : DVB-S #0 - retune nodata
      6. 2017-07-05 02:49:40.674 linuxdvb: Si2166B : DVB-S #0 - poll TIMEOUT
      7. 2017-07-05 02:49:41.317 linuxdvb: Si2166B : DVB-S #0 - retune nodata
      8. 2017-07-05 02:49:42.000 mpegts: 12246V in Astra 28.2 O - scan no data, failed
      9. 2017-07-05 02:49:42.000 subscription: 0272: "scan" unsubscribing
      10. 2017-07-05 02:49:42.001 subscription: 0273: "keep" unsubscribing
    • tvheadend
      scan 01.05.2018 - Astra 19.2 - DM900 - BCM45208

      108 Muxes - 1434 Services

      gruß pclin
      Bilder
      • tvheadend-dm900-vlc.jpg

        1,35 MB, 1.920×1.080, 61 mal angesehen
      • CLI-tvheadend.jpg

        1,89 MB, 1.920×1.080, 49 mal angesehen
      Die zwei Gemütszustände eines Programmierers
      0 ich hab keine Ahnung was ich hier mache
      1 ICH BIN GOTT
      ---
      DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      (Flash) DMM-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      ---
      AudioDSP: miniDSP 2x4 HD
    • Neue Version tvheadend-4.0.10 armhf/mipsel jetzt im IHAD

      Zusätzliche Optionen

      Quellcode

      1. --enable-dvbscan \
      2. --enable-dvbcsa \
      3. --enable-uriparser \
      4. --enable-gperftools \
      5. --disable-libav \
      6. Package: tvheadend
      7. Version: 4.0.10+git0+b371348588-r0.1
      8. Description: Tvheadend TV streaming server
      9. Tvheadend TV streaming server.
      10. Section: base
      11. Priority: optional
      12. Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org>
      13. Architecture: armhf
      14. OE: tvheadend
      15. PackageArch: cortexa15hf-neon-vfpv4
      16. Homepage: https://www.lonelycoder.com/redmine/projects/tvheadend
      17. Depends: libssl1.0.0 (>= 1.0.2h), libdvben50221, libdvbapi, libavahi-common3 (>= 0.6.32), libdbus-1-3 (>= 1.10.6), libz1 (>= 1.2.8), libdvbcsa1 (>= 1.1.0), libavahi-client3 (>= 0.6.32), libcrypto1.0.0 (>= 1.0.2h), libucsi, libc6 (>= 2.23)
      Alles anzeigen

      log.do.configure

      Quellcode

      1. Checking support/features
      2. checking for cc execinfo.h ... ok
      3. checking for cc mmx ... fail
      4. checking for cc sse2 ... fail
      5. checking for cc getloadavg ... ok
      6. checking for cc atomic64 ... ok
      7. checking for cc lockowner ... ok
      8. checking for cc qsort_r ... ok
      9. checking for cc stime ... ok
      10. checking for cc recvmmsg ... ok
      11. checking for cc sendmmsg ... ok
      12. checking for cc libiconv ... fail
      13. checking for cc libdvben50221 ... ok
      14. checking for py module gzip ... ok
      15. checking for gzip ... ok
      16. checking for bzip2 ... ok
      17. checking for pkg openssl ... ok (detected 1.0.2h)
      18. checking for cc linux/dvb/version.h ... ok
      19. checking for pkg zlib ... ok (detected 1.2.8)
      20. checking for pkg liburiparser ... ok (detected 0.8.5)
      21. checking for pkg avahi-client ... ok (detected 0.6.32)
      22. checking for ffmpeg libraries ... ok
      23. checking for pkg libavcodec >=55.18.102 ... ok (detected 57.24.102)
      24. checking for pkg libavutil >=52.38.100 ... ok (detected 55.17.103)
      25. checking for pkg libavformat >=55.12.100 ... ok (detected 57.25.100)
      26. checking for pkg libswscale >=2.3.100 ... ok (detected 4.0.100)
      27. checking for pkg libavresample >=1.1.0 ... fail (detected <none>)
      28. checking for cc sys/inotify.h ... ok
      29. checking for cc dvbcsa/dvbcsa.h ... ok
      30. checking for cc -ldvbcsa ... ok
      31. fetching dvb-scan files ... ok
      32. checking for pkg dbus-1 ... ok (detected 1.10.6)
      33. Compiler:
      34. Using C compiler: arm-oe-linux-gnueabi-gcc -march=armv7ve -mfpu=neon-vfpv4 -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/dm900
      35. Using C flags: -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/tvheadend/4.0.10+gitAUTOINC+b371348588-r0=/usr/src/debug/tvheadend/4.0.10+gitAUTOINC+b371348588-r0 -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/x86_64-linux= -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/dm900=
      36. Using LD flags: -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -ldvbcsa -ldvben50221 -ldvbapi -lucsi
      37. Build for arch: arm
      38. Binaries:
      39. Using PYTHON: python
      40. Using GZIP: gzip
      41. Using BZIP2: bzip2
      42. Options:
      43. cwc yes
      44. capmt yes
      45. constcw yes
      46. linuxdvb yes
      47. satip_server yes
      48. satip_client yes
      49. hdhomerun_client yes
      50. hdhomerun_static yes
      51. iptv yes
      52. tsfile yes
      53. dvbscan yes
      54. timeshift yes
      55. trace yes
      56. imagecache yes
      57. avahi yes
      58. zlib yes
      59. libav no
      60. libffmpeg_static no
      61. libffmpeg_static_x264 yes
      62. inotify yes
      63. epoll yes
      64. uriparser yes
      65. ccache no
      66. tvhcsa yes
      67. bundle no
      68. dvbcsa yes
      69. dvben50221 yes
      70. kqueue no
      71. dbus_1 yes
      72. android no
      73. tsdebug no
      74. gtimer_check no
      75. execinfo yes
      76. getloadavg yes
      77. atomic64 yes
      78. lockowner yes
      79. qsort_r yes
      80. stime yes
      81. recvmmsg yes
      82. sendmmsg yes
      83. libdvben50221 yes
      84. py_gzip yes
      85. bin_gzip yes
      86. bin_bzip2 yes
      87. ssl yes
      88. linuxdvbapi yes
      89. upnp yes
      90. inotify_h yes
      91. linuxdvb_ca yes
      92. mpegts yes
      93. mpegts_dvb yes
      94. Packages:
      95. openssl 1.0.2h
      96. zlib 1.2.8
      97. liburiparser 0.8.5
      98. avahi-client 0.6.32
      99. libavcodec 57.24.102
      100. libavutil 55.17.103
      101. libavformat 57.25.100
      102. libswscale 4.0.100
      103. dbus-1 1.10.6
      104. Installation paths:
      105. Prefix: /usr
      106. Binaries: /usr/bin
      107. Libraries: /usr/lib
      108. Data files: /usr/share
      109. Man pages: /usr/share/man
      Alles anzeigen
      gruß pclin
      Bilder
      • tvheadend-4.0.10.jpg

        448,39 kB, 1.920×1.080, 57 mal angesehen
      • tvheadend-VLC-PC.jpg

        1,28 MB, 1.920×1.080, 49 mal angesehen
      Die zwei Gemütszustände eines Programmierers
      0 ich hab keine Ahnung was ich hier mache
      1 ICH BIN GOTT
      ---
      DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      (Flash) DMM-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      ---
      AudioDSP: miniDSP 2x4 HD

      Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von pclin ()

    • Update auf tvheadend-4.3 - armhf/mipsel

      log.do.configure

      Quellcode

      1. Checking support/features
      2. checking for cc execinfo.h ... ok
      3. checking for cc -mmmx ... fail
      4. checking for cc -msse2 ... fail
      5. checking for cc -Wunused-result ... ok
      6. checking for cc getloadavg ... ok
      7. checking for cc atomic64 ... ok
      8. checking for cc atomic_time_t ... ok
      9. checking for cc bitops64 ... ok
      10. checking for cc lockowner ... ok
      11. checking for cc qsort_r ... ok
      12. checking for cc stime ... ok
      13. checking for cc gmtoff ... ok
      14. checking for cc recvmmsg ... ok
      15. checking for cc sendmmsg ... ok
      16. checking for cc libiconv ... fail
      17. checking for cc libdvben50221 ... ok
      18. checking for cc ifnames ... ok
      19. checking for cc llabs ... ok
      20. checking for py module gzip ... ok
      21. checking for pkg-config ... ok
      22. checking for xgettext ... ok
      23. checking for msgmerge ... ok
      24. checking for gzip ... ok
      25. checking for bzip2 ... ok
      26. checking for pkg openssl ... ok (detected 1.0.2h)
      27. checking for cc linux/dvb/version.h ... ok
      28. checking for pkg zlib ... ok (detected 1.2.8)
      29. checking for pkg liburiparser ... ok (detected 0.8.5)
      30. checking for pkg avahi-client ... ok (detected 0.6.32)
      31. checking for cc sys/inotify.h ... ok
      32. checking for cc inotify_init1 ... ok
      33. checking for cc dvbcsa/dvbcsa.h ... ok
      34. checking for cc -ldvbcsa ... ok
      35. fetching dvb-scan files ... ok
      36. checking for cc epoll_create1 ... ok
      37. checking for pkg dbus-1 ... ok (detected 1.10.6)
      38. Compiler:
      39. Using C compiler: arm-oe-linux-gnueabi-gcc -march=armv7ve -mfpu=neon-vfpv4 -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/dm900
      40. Using C flags: -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/tvheadend/4.3+gitcf097d4062a606de3eee4f34b03848b3a39f0783-r0=/usr/src/debug/tvheadend/4.3+gitcf097d4062a606de3eee4f34b03848b3a39f0783-r0 -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/x86_64-linux= -fdebug-prefix-map=/media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/sysroots/dm900=
      41. Using LD flags: -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -ldvbcsa -ldvben50221 -ldvbapi -lucsi
      42. Build for arch: arm
      43. Binaries:
      44. Using PYTHON: python
      45. Using GZIP: gzip
      46. Using BZIP2: bzip2
      47. Options:
      48. pie yes
      49. ccdebug no
      50. cwc yes
      51. capmt yes
      52. constcw yes
      53. linuxdvb yes
      54. satip_server yes
      55. satip_client yes
      56. hdhomerun_client no
      57. hdhomerun_static no
      58. iptv yes
      59. tsfile yes
      60. dvbscan yes
      61. timeshift yes
      62. trace yes
      63. imagecache yes
      64. avahi yes
      65. zlib yes
      66. libav no
      67. ffmpeg_static no
      68. libx264 yes
      69. libx264_static no
      70. libx265 yes
      71. libx265_static no
      72. libvpx yes
      73. libvpx_static no
      74. libtheora yes
      75. libtheora_static no
      76. libvorbis yes
      77. libvorbis_static no
      78. libfdkaac yes
      79. libfdkaac_static no
      80. nvenc no
      81. qsv no
      82. libmfx_static yes
      83. inotify yes
      84. epoll yes
      85. uriparser yes
      86. ccache no
      87. tvhcsa yes
      88. bundle no
      89. pngquant no
      90. dvbcsa yes
      91. dvben50221 yes
      92. kqueue no
      93. dbus_1 yes
      94. android no
      95. tsdebug no
      96. gtimer_check no
      97. slow_memoryinfo no
      98. libsystemd_daemon no
      99. bintray_cache yes
      100. execinfo yes
      101. W_unused_result yes
      102. getloadavg yes
      103. atomic64 yes
      104. atomic_time_t yes
      105. bitops64 yes
      106. lockowner yes
      107. qsort_r yes
      108. stime yes
      109. gmtoff yes
      110. recvmmsg yes
      111. sendmmsg yes
      112. libdvben50221 yes
      113. ifnames yes
      114. llabs yes
      115. py_gzip yes
      116. bin_pkg_config yes
      117. bin_xgettext yes
      118. bin_msgmerge yes
      119. bin_gzip yes
      120. bin_bzip2 yes
      121. ssl yes
      122. linuxdvbapi yes
      123. upnp yes
      124. inotify_h yes
      125. inotify_init1 yes
      126. linuxdvb_ca yes
      127. epoll_create1 yes
      128. mpegts yes
      129. mpegts_dvb yes
      130. Packages:
      131. openssl 1.0.2h
      132. zlib 1.2.8
      133. liburiparser 0.8.5
      134. avahi-client 0.6.32
      135. dbus-1 1.10.6
      136. Installation paths:
      137. Prefix: /usr
      138. Binaries: /usr/bin
      139. Libraries: /usr/lib
      140. Data files: /usr/share
      141. Man pages: /usr/share/man
      142. Final Binary:
      143. /media/pclin/HDD2TB/OE2.5/opendreambox/build/dm900/tmp-glibc/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/tvheadend/4.3+gitcf097d4062a606de3eee4f34b03848b3a39f0783-r0/git/build.linux/tvheadend
      144. Tvheadend Data Directory:
      145. /usr/share/tvheadend
      Alles anzeigen
      gruß pclin
      Bilder
      • tvheadend-4.3.jpg

        517,47 kB, 1.920×1.080, 33 mal angesehen
      Die zwei Gemütszustände eines Programmierers
      0 ich hab keine Ahnung was ich hier mache
      1 ICH BIN GOTT
      ---
      DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      (Flash) DMM-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      ---
      AudioDSP: miniDSP 2x4 HD

      Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von pclin ()