Dreambox DM7020 HD v2 flashing problem

  • Hi,


    I have problem regarding flashing to new image, I've tried few different images but problem is always the same.
    First of all I have tried to flash using this link:
    https://dreambox.de/en/dm7020hd-flashing-browser


    After that I go to 192.168.1.231 (which is address of my Dreambox) and to Firmware upgrade (I choose the image (OpenATV 6.0) and it starts flashing, but usually it proceeds until 5-6% and stops.
    It seems that in that point Telnet connection is dead for some reason or another. I've tried few different images the result is always same.


    Also I've tried to make connection to Dreambox using DreamUP and FlashWizard PRO but without any success.
    It seems that something has left hanging and nothing works (it is not possible to make Telnet connection working).
    I need somehow to install any image if it is possible without using Telnet connection


    Is it possible somehow to flash image using only USB? I couldn't find anything related on Internet for this Dreambox.
    There is somekind of link on Dreambox page after entering IP address of Dreambox device, but link is not working.


    Please help because my Dreambox is useless now, I can't use it now until I somehow install any image that can work for this situation.


    Best Regards

  • Images were never flashed via telnet or USB *)


    And Flashwizzard is for enigma1 boxes. DreamUP works only if you use also an USB cable.


    Probably your fireall or antivirus simply blocks the transfer, try to flash when they are disabled.


    *) this is a lie, but as I'm the author of the command line flashing tool and offered USB Flashing long ago I took this freedom - simply to avoid further ueseless questions in that direction as I don't suppprt these old Dreamboxes anymore and it would not help you on your problem either.

    2 Mal editiert, zuletzt von Lost in Translation ()

  • Hi gutemine,


    I had already disabled firewall, and turned off antivirus, same result. :frowning_face:


    Also tried on my another computer which doesn't even have antivirus, same happens. Connection towards Dreambox is dead after it comes to 4-5 %, after that I try to connect to IP address of Dreambox again, it is not possible to connect. Obviusly it had installed something until that few percents, since that is why I cannot connect. Is there any other program with which I could use to try to flash with Telnet connection?


    Regarding DreamUP, will this work if I use USB cable? I mean is it possible to connect without using Telnet connection (I mean to connect my PC and Dream using USB cable). DreamUP offers me COM1 connection only.


    One thing which might help me also is there a way to Factory Reset of this Dreambox, keeping in mind I don't have access to OS.


    Thanks in advance and best regards.

  • AGAIN there is and was never a telnet connection needed to flash a Dreambox - this is not a d-Box !


    It was and is always flashed via WebIF and only in emergency case (if the SSL was killed) you you flash serrial via DreamUP (which now means USB connection with most of the not so old boxes)


    For DreamUP get the Windows drivers so that USB connected to Dreambox shows up as COM port


    https://dreambox.de/firmware/d…P_Win_XP_S2K3_Vista_7.zip


    and then follow this:


    https://dreambox.de/en/dm7020-flashing-dreamup

  • Hi,


    Sorry, I'm new to this so didn't know all the details.


    Now everything is clear, I have to try to flash using DreamUP, since first one is not working.


    Thanks and BR.

  • Hallo, ich bitte um Hilfe, meine Dreambox 7020hd stürzt immer wieder ab (Firmware opendroid-6.0-dm7020hd-20170325.nfi). Also habe ich versucht, eine andere Firmware (openatv-6.4-dm7020hd-20201209.nfi) zu laden. Sie wird geladen, startet aber nicht. Ich habe auch USB Serial ausprobiert, aber nichts. Wie kann ich das beheben? Boot # 89

    Ich füge einen Link zu meinem BIOS hinzu:

    https://mega.nz/file/XAgHEIRQ#…aGiDQq4ggBoeS0pLRGS-uIXa8


    Ich habe auch Frabrica aus dem BIOS zurückgesetzt

    wie hier erklärt:

    dm7020HD: stuck on DHCP at boot time


    p.s Es tut mir leid, dass ich einen Übersetzer benutze

    thanks

    Einmal editiert, zuletzt von salvli ()

  • Original Dreambox Image flashen, und schauen ob weiter crasht.

    Ist es der fall, dann crashlog anhängen.


    http://dreamboxupdate.com/open…ox/2.0.0/images/dm7020hd/

    E2 Box: Two, One, DM 8000, DM7080HD, DM 7025(+), DM 7020HD(v2), DM9x0, DM820HD, DM 800SE(v2), DM 800HD, DM52x, DM500HD(v2)
    E1 Box: DM 7020, DM 7000, DM 5620-S, TRIAX 272-S, DM 600PVR, DM 500+, DM 500-S

    Sonstiges: DM100, DM Tastatur, Logi K600 BT Tastatur
    Sat: WaveFrontier T90 23.5E <=> 30.0W

  • danke, ich kann kein Originalbild finden, kannst du mir helfen


    Original Dreambox Image flashen, und schauen ob weiter crasht.

    Ist es der fall, dann crashlog anhängen.


    http://dreamboxupdate.com/open…ox/2.0.0/images/dm7020hd/

    http://www.dreamboxupdate.com/


    :thumbs_up: dem ersten. Ich habe Ihren Link nicht einmal in Eile gesehen. Kann ich C .... :winking_face: auf die Probe stellen?

    3 Mal editiert, zuletzt von salvli () aus folgendem Grund: Merged a post created by salvli into this post.

  • Alle gelösten geladenen Originale del Firmware, dann machte Werksreset von BIOS und geladene Firmware, die ich zuvor beibehalten habe, auch weil, wenn ich openatv-6.4-dm7020hd-20201209 lade, es lädt, aber nicht startet, ich verstehe warum nicht




    Tutto risolto ho caricato il firmware originale, poi fatto il reset di fabbrica del BIOS e caricato il firmware che tenevo prima, anche perché quando carico openatv-6.4-dm7020hd-20201209 si carica ma non si avvia, non capisco perché

  • Dann liegt das problem nicht an die Box aber am openatv image.

    Das kann nur dennen ihre Team in ihre Board beantworten.

    E2 Box: Two, One, DM 8000, DM7080HD, DM 7025(+), DM 7020HD(v2), DM9x0, DM820HD, DM 800SE(v2), DM 800HD, DM52x, DM500HD(v2)
    E1 Box: DM 7020, DM 7000, DM 5620-S, TRIAX 272-S, DM 600PVR, DM 500+, DM 500-S

    Sonstiges: DM100, DM Tastatur, Logi K600 BT Tastatur
    Sat: WaveFrontier T90 23.5E <=> 30.0W

  • Cepheus62 ciao,ho solo un problema soffre di lan, finche e acceso e ok ma se stacco da interruttore dietro appena accendo non si connette alla rete, lasciando ore spento poi accendo si connette,ho gia guardato condensatori sono buoni non gonfi mi sapresti dire quali possono essere quelli incriminati?in caso li sostituisco puo anche essere che sono gia in difetto

    grazie


    anche se non lo fa sempre