Tuner configuration: how to configure advanced as simple DisEqC A/B/C/D.

  • Hello all.


    I have 4x twin lnb with 2x 4 port switches on two tuners on a DM8000.
    Port A = 19,2e, Port B = 28.2e, Port C = 23.5e, Port D = 13.0e.


    I always used the simple DisEqC A/B/C/D tuner configuration, and the second tuner set to equal as the first configured one. It all works oke.


    I have a 3th DVB-S2 tuner with blindscan support plugged in the DM8000. I want to use that tuner as first priority.
    In Openpli based images you can set up a preferred tuner in simple tuner configuration, but with DMM OE2.0.X based images you can only do that in the advanced tuner configuration.


    I'm struggling with getting the tuners to work in advanced configuration. I get as result now a tuned failed.



    Simple configuration works excellent.


    Now can somebody please tell me how the advanced tuner configuration can be configured the same way as how simple DiSEqC A/B/C/D is configured?
    So that i have a basic advanced configuration to start with with my used lnb/switch setup.

    Dreambox DM8000 HD PVR (HDD / DVD-rw | IPTV.

    Einmal editiert, zuletzt von ACTAsucks ()


  • Thanks.


    So
    portA (input1) 19.2e = AA
    portB (input2) 28.2e = AB
    portC (input3) 23.5e = BA
    portD (input4) 13.0e = BB


    Like that? So DisEqC 1.0 ?

    Dreambox DM8000 HD PVR (HDD / DVD-rw | IPTV.

  • Hi,


    yes...


    cu


    Awesome. Thanks Ghost. :thumbs_up:


    Indeed the A B stuff. And just DiSEqC 1.0 (for 4 port switch) And the priority, the higher the number, the higher priority. (so 0 has no priority)

    Dreambox DM8000 HD PVR (HDD / DVD-rw | IPTV.

    2 Mal editiert, zuletzt von ACTAsucks ()