hello,
i am trying to set my dm8000s with 16input and 8 put out multi swich with 1m dish +4 qoutro lnb , s
and my set up is 28.2E , 19.2E , 13.0E and 9.0e
and on multi switch satellite conection are{ SAT A=28.2E} {SAT B=19.2E} {SAT C=13.0E} {SAT D=9.0E}
and in dm800 tuner as i menu
Press Menu
Select " Setup " and press Ok.
Select "Service Searching " and press OK
Select "Tuner Configuration " and press OK
Select a tuner and press OK (you need to do the same for each tuner).
On " Configuration Mode "choose Simple
On "Mode "select Diseqc A / B / C / D
For the port set -up you have to have the same in each port as you do on each input of the multi -switch switch / Diseqc .
Port A = Input 1
Port B = Input 2
Port C Input 3 =
Port D Input 4 =
Leave the "Set Voltage & 22kHz "as yes
On the " Send only on Diseqc Satellite Change " to Yes
NOW I HAVE SET ALL 4 TUNER EXACT SAME BUT WHEN I SELECT AUTOMATICALYY SCAN THERE I ONLY SEE TUNER -A ALL OTHERS ARE MISSING .
i have disable the tuner A, C , D AND LET TUNER B RUNNING. IN THAT CASE I CAN SEE BUT WHEN I SELECT ALL IN ONE TUNERB TIME THEN I HAVE PROBLEM .
i believe i should be as
Each tuner needs to be scanned for channels on all four satellites or go into automatic scan and all tuners set to " yes "the scan will then four tuners simultaneously unfortunatly but in my case it is not happening.
please please help me out as i am completly new with this box .
Thanls