Dm 520 world wide problem

  • Hi every body.
    In the first i hope to introduce my self
    Ahmed habib
    Dream.multimedia dealer in egypt.


    I have 5 recivers from dm 520
    With th same problem.


    2 are new.
    3 in client use.


    All have same problem.


    When we need to setup new os.
    Recivers still in red lamp
    Conected via dcc . but still in black screen
    I tried.
    1. Update rescue
    2. Downgrade it.
    3. Make new image all. Stable gemeni. Dreamelite etc
    Same problem


    When we flash it in open source. It works.
    And opens
    But tunner is empty
    With 2 tuner a and b are emty .
    I know dm 520 is. 1 tuner but that's which written .


    Note. Dream multimeda agent in middle east says that dream multimeda doesn't send him spare parts . To change mother board for our client


    So they are upset and shouting all the time.
    They are making fb campaine against dreambox.
    And called us as robbers. Dishonest. Tricky alllllll

  • no bootlog = no support


    and no this is not a worldwide problem as an official dealer knows that for warranty claims he has to send the box to the manufacturer instead of shouting for spare parts.

  • no bootlog = no support


    and no this is not a worldwide problem as an official dealer knows that for warranty claims he has to send the box to the manufacturer instead of shouting for spare parts.


    good morning sir .


    first about boot log
    i will make it


    but to be know
    i read about 45 to 50 thread
    here and in other fourms
    in many languge about same problem


    you can assure type in google
    dm 520 died and you will find more




    about warranty .
    are you offical represnitive for dram propirty?
    is that an official respond ?

  • Dreambox DM520


    M0CZS
    L2=1
    LLMB=1
    BrCfg=E30FB7C6
    #@


    BCM973625A0 CFE v15.3, Endian Mode: Little
    Build Date: Fri Aug 19 11:48:16 2016 (Jann@Cynric)
    Copyright (C) Broadcom Corporation.


    Non-CI box detected
    card if inited
    Enabling NAND flash at CS2: A5U4GA31ATS(DEVICE ID=0xC8DC9095), ECC Level=4, Spare Area Size=16
    MACRONIX SPI flash detected: Size = 16MB, Sector Size 4096, Page Size 256


    CPU speed: 751MHz
    DDR Frequency: 1061 MHz
    DDR Mode: DDR3
    Total memory(MEMC 0): 512MB
    MEMC 0 DDR Width: 16
    Boot Device: SPI
    Total flash: 16MB
    RTS VERSION: rts_hevc10_1067
    ETH0_PHY: INT
    ETH0_MDIO_MODE: 1
    ETH0_SPEED: 100
    ETH0_PHYADDR: 1


    DM init finalization
    yxml: processing file of 131072 bytes... succeeded!
    no file loaded, create xml restoring default xml
    loaded network params of: DHCP, 192.168.0.219, 255.255.255.0, 192.168.0.1
    [1] type 3, dev nandflash0.kernel, loader elf, filesys raw, file , options
    [2] type 3, dev flash0.kernel, loader elf, filesys raw, file , options
    [3] type 1, dev eth0, loader elf, filesys tftp, file , options bmem=192M@64M console=ttyS0,1000000 root=/dev/nfs ip=dhcp
    added 3 sources to autoboot list
    init fp
    Initializing USB.


    CFE initialized.
    found card in unknown state
    cannot read T1 header
    error in receive
    error during t1 transfer
    cannot read fabca-cert




    ***** DREAMBOX SSBL *****


    Not interrupted yet, trying autoboot or rescue loader, hit any key in the next 500ms to cancel
    Proceeding with autoboot.. You can try aborting with Ctrl+C


    *** Autoboot: Trying device 'nandflash0.kernel' file (raw,elf)


    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:
    Loading: 0x80001000/8423616 0x808098c0/258288 Entry address is 0x8066f5d0
    Closing network eth0
    Ethernet link is up: 100 Mbps Full-Duplex
    Starting program at 0x8066f5d0


    [ 0.250000] console [ttyS0] enabled, bootconsole disabled
    [ 0.250000] console [ttyS0] enabled, bootconsole disabled
    [ 0.254000] loop: module loaded
    [ 0.255000] brcmstb_nand: NAND controller driver is loaded
    [ 0.377000] bcmgenet: configuring instance #0 for internal PHY
    [ 0.397000] bcmgenet bcmgenet.0: (unregistered net_device): link down
    [ 0.398000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.399000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [ 0.399000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [ 0.431000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [ 0.437000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [ 0.438000] hub 1-0:1.0: USB hub found
    [ 0.438000] hub 1-0:1.0: 2 ports detected
    [ 0.439000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.440000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [ 0.440000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    [ 0.441000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    [ 0.507000] hub 2-0:1.0: USB hub found
    [ 0.508000] hub 2-0:1.0: 2 ports detected
    [ 0.508000] Initializing USB Mass Storage driver...
    [ 0.509000] usbcore: registered new interface driver usb-storage
    [ 0.510000] USB Mass Storage support registered.
    [ 0.510000] i2c /dev entries driver
    [ 0.511000] lirc_dev: IR Remote Control driver registered, major 253
    [ 0.511000] usbcore: registered new interface driver btusb
    [ 0.513000] TCP: cubic registered
    [ 0.513000] NET: Registered protocol family 10
    [ 0.515000] NET: Registered protocol family 17
    [ 0.515000] Bluetooth: RFCOMM TTY layer initialized
    [ 0.516000] Bluetooth: RFCOMM socket layer initialized
    [ 0.517000] Bluetooth: RFCOMM ver 1.11
    [ 0.517000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 0.518000] Bluetooth: BNEP filters: protocol multicast
    [ 0.518000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [ 0.519000] L2TP core driver, V2.0
    [ 0.520000] Registering the dns_resolver key type
    [ 0.520000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [ 0.522000] EBI CS2: setting up NAND flash (primary)
    [ 0.523000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xdc (Unknown NAND 512MiB 3,3V 8-bit)
    [ 0.524000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [ 0.524000]
    [ 0.526000] Bad block table found at page 262080, version 0x01
    [ 0.527000] Bad block table found at page 262016, version 0x01
    [ 0.528000] nand_read_bbt: bad block at 0x000015d20000
    [ 0.529000] nand_read_bbt: bad block at 0x000017ec0000
    [ 0.529000] nand_read_bbt: bad block at 0x00001da60000
    [ 0.531000] Creating 3 MTD partitions on "brcmnand.0":
    [ 0.531000] 0x000000000000-0x00001f500000 : "rootfs"
    [ 0.533000] 0x000000000000-0x000020000000 : "entire_device"
    [ 0.535000] 0x00001f500000-0x00001fa00000 : "kernel"
    [ 0.537000] EBI CS0: setting up SPI flash
    [ 0.537000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    [ 0.538000] spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    [ 0.539000] m25p80 spi0.0: found mx25l12805d, expected w25q128bv
    [ 0.540000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
    [ 0.542000] UBI: attaching mtd0 to ubi0
    [ 0.542000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
    [ 0.543000] UBI: logical eraseblock size: 126976 bytes
    [ 0.544000] UBI: smallest flash I/O unit: 2048
    [ 0.544000] UBI: VID header offset: 2048 (aligned 2048)
    [ 0.545000] UBI: data offset: 4096
    [ 3.682000] UBI: max. sequence number: 213019
    [ 3.698000] UBI: attached mtd0 to ubi0
    [ 3.698000] UBI: MTD device name: "rootfs"
    [ 3.699000] UBI: MTD device size: 501 MiB
    [ 3.699000] UBI: number of good PEBs: 4005
    [ 3.700000] UBI: number of bad PEBs: 3
    [ 3.701000] UBI: number of corrupted PEBs: 0
    [ 3.701000] UBI: max. allowed volumes: 128
    [ 3.702000] UBI: wear-leveling threshold: 4096
    [ 3.702000] UBI: number of internal volumes: 1
    [ 3.703000] UBI: number of user volumes: 1
    [ 3.703000] UBI: available PEBs: 0
    [ 3.704000] UBI: total number of reserved PEBs: 4005
    [ 3.704000] UBI: number of PEBs reserved for bad PEB handling: 40
    [ 3.705000] UBI: max/mean erase counter: 106/53
    [ 3.706000] UBI: image sequence number: -1835037005
    [ 3.706000] UBI: background thread "ubi_bgt0d" started, PID 55
    [ 3.708000] ALSA device list:
    [ 3.708000] No soundcards found.


    [ 3.760000] UBIFS: recovery needed
    [ 3.921000] UBIFS: recovery completed
    [ 3.921000] UBIFS: mounted UBI device 0, volume 0, name "dreambox-rootfs"
    [ 3.922000] UBIFS: file system size: 501555200 bytes (489800 KiB, 478 MiB, 3950 LEBs)
    [ 3.923000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    [ 3.924000] UBIFS: media format: w4/r0 (latest is w4/r0)
    [ 3.925000] UBIFS: default compressor: lzo
    [ 3.925000] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 3.926000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [ 3.930000] devtmpfs: mounted
    INIT: version 2.88 booting
    [ 5.314000] stb_core: module license 'Proprietary' taints kernel.
    [ 5.315000] Disabling lock debugging due to kernel taint
    [ 5.400000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [ 5.409000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [ 5.469000] input: dreambox ir keyboard as /devices/virtual/input/input2
    [ 5.479000] input: dreambox ir mouse as /devices/virtual/input/input3
    [ 6.554000] bcm73625: xvd 20150918, vdc 20150918, rap 20150918, xpt 20150918, driver version 20170110-dm520
    [ 7.867000] 7:866112514 UARTC: cannot reset tpm
    [ 7.878000] 7:877314799 SMCA: controller reset timed out
    [ 7.879000] TPM validation failed.
    [ 7.880000] register adapter
    [ 7.886000] register adapter
    [ 7.895000] register adapter
    [ 7.911000] input: dreambox front panel as /devices/virtual/input/input4
    [ 7.920000] OFFSET 1554961869 17087176
    [ 7.921000] WKTMR 13 12409198
    [ 7.921000] LAST WKTMR 669711980
    [ 7.924000] set input to 0
    [ 7.924000] set fb to 2(-1)
    [ 7.927000] fallback to startvideomode '720p50'
    [ 7.928000] HDMI: now connected
    [ 7.956000] HDMI: Physical CEC Addr set from EDID
    [ 7.957000] HDMI: EDID read ok
    [ 7.957000] HDMI: initial mode set!
    [ 7.958000] using 50.00Hz as MonitorRefreshRate
    [ 7.958000] SET FORMAT: display[0], format=42
    [ 7.959000] HDMI mode
    [ 7.959000] use EDID to detect colorspace
    [ 7.960000] using colorspace: 1
    [ 8.001000] HDMI: start CEC
    [ 8.001000] HDMI: use logical CEC address 3
    [ 8.002000] CEC init completed!
    [ 8.003000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 8.137000] VIDEO0: enable deinterlacer
    [ 8.138000] VIDEO0: set fallback framerate to 60000
    [ 8.139000] VIDEO0: set progressive override mode to 1
    [ 8.139000] VIDEO0: set streamtype!
    [ 8.140000] -> set MPEG2
    [ 8.140000] -> sw rave disabled!
    [ 8.150000] set ac3 to downmix
    [ 8.150000] set ac3plus to use_hdmi_caps
    [ 8.150000] set aac to downmix
    [ 8.151000] DVB: registering new adapter (BCM73625)
    [ 8.151000] CEC send ok!
    [ 8.298000] vtuner0 device is not opened!
    [ 8.299000] vtuner0 device is not opened!
    [ 8.299000] vtuner0 device is not opened!
    [ 8.300000] vtuner0 device is not opened!
    [ 8.300000] vtuner0 device is not opened!
    [ 8.301000] init ALSA!
    [ 8.323000] registered vtuner misc/vtuner0, minor 56
    [ 8.325000] registered vtuner misc/vtuner1, minor 55
    [ 8.970000] VIDEO0: set blank to 0
    [ 8.974000] sync0 is off so we enable it
    [ 8.974000] sync0: allocated pcroffset 0
    [ 8.975000] sync0: playback!
    [ 8.976000] VIDEO0: total delay: 0 (0 ms)
    [ 8.983000] VIDEO0: start decode
    [ 8.987000] VIDEO0: flush video decoder
    [ 8.988000] VIDEO0 got pts failed !!!! (ret 0)
    [ 9.061000] VIDEO0: first pts 0x0
    [ 9.061000] VIDEO0: framerate changed 3
    [ 9.062000] VIDEO0: resolution changed (1280 720)
    [ 9.062000] VIDEO0: aspect changed 3
    [ 9.063000] set current avs auto aspect to 16:9
    [ 9.064000] set current avs auto aspect to 16:9
    [ 9.064000] set sb to 3(1)
    [ 9.214000] VIDEO0: enable tsm
    [ 9.290000] VIDEO0: set blank to 0
    [ 9.291000] VIDEO0: stop decode
    [ 9.291000] VIDEO0: set blank to 0
    [ 9.292000] sync0 1fff no decoder left in sync handling so disable
    [ 9.293000] sync0: was last pcroffset0 user so free it
    ALSA: Restoring mixer settings...
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    Starting tpmd.
    INIT: Entering runlevel: 3
    Configuring network interfaces... [ 11.607000] ADDRCONF(NETDEV_UP): eth0: link is not ready
    udhcpc (v1.24.1) started
    Sending discover...
    [ 13.135000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
    [ 13.135000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Sending discover...
    Sending select for 192.168.1.7...
    Lease of 192.168.1.7 obtained, lease time 86400
    /etc/udhcpc.d/50default: Adding DNS 192.168.1.1
    /etc/udhcpc.d/50default: Adding DNS 192.168.1.1
    done.
    Starting system message bus: dbus.
    Starting Dropbear SSH server: dropbear.
    Starting automount: automount: program is already running.
    done.
    Starting rpcbind daemon...done.
    starting 8 nfsd kernel threads: [ 16.845000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 16.846000] NFSD: starting 90-second grace period
    done
    starting mountd: done
    Mounting remote filesystems...
    creating NFS state directory: done
    starting statd: done
    starting Busybox Periodic Command Scheduler: crond... done.
    crond[405]: crond (busybox 1.24.1) started, log level 8


    Fuse filesystem already available.
    Mounting fuse control filesystem.
    Starting internet superserver: inetd.
    Starting IPv6 Recursive DNS Server discovery Daemon rdnssd
    Starting Samba: smbd nmbd.
    Starting Shell In A Box server: shellinabox.
    Starting syslogd/klogd: done
    Starting telnet server: telnetd.
    * starting FTP Server: vsftpd... done.
    * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
    ...done.
    killall: showiframe: no process killed
    [ 19.429000] VIDEO0: set blank to 0
    [ 19.429000] sync0 is off so we enable it
    [ 19.430000] sync0: allocated pcroffset 0
    [ 19.430000] sync0: playback!
    [ 19.431000] VIDEO0: total delay: 0 (0 ms)
    [ 19.439000] VIDEO0: start decode
    [ 19.441000] VIDEO0: flush video decoder
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    [ 19.501000] VIDEO0: first pts 0x0
    [ 19.651000] VIDEO0: enable tsm
    [ 19.726000] VIDEO0: set blank to 0
    [ 19.728000] VIDEO0: stop decode
    [ 19.728000] VIDEO0: set blank to 0
    [ 19.728000] sync0 1fff no decoder left in sync handling so disable
    [ 19.729000] sync0: was last pcroffset0 user so free it
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    enigma2 is the main pvr application... adjust oom score!
    [ 21.727000] bcm_accel: invalid opcode! 00000080
    framebuffer not available.
    [ 21.779000] bcmfb: enable manual blit
    [ 21.780000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    /etc/network/if-up.d/ntpdate-sync: line 45: hwclock: command not found
    executing main
    [ 22.293000] set current avs auto aspect to 16:9
    [ 22.293000] set sb to 3(1)
    [ 22.294000] set current avs auto aspect to 16:9
    [ 22.295000] set sb to 3(1)
    [ 22.295000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [ 22.296000] set current avs auto aspect to 16:9
    [ 22.297000] set sb to 3(1)
    [ 22.298000] set current avs auto aspect to 16:9
    [ 22.298000] set sb to 3(1)
    [ 29.501000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 30.737000] set current avs auto aspect to 16:9
    [ 30.738000] set sb to 3(1)
    [ 30.740000] set current avs auto aspect to 16:9
    [ 30.741000] set sb to 3(1)
    [ 30.744000] set current avs auto aspect to 16:9
    [ 30.745000] set sb to 3(1)
    cannot open /proc/stb/avs/0/colo[ 30.748000] set input to 0
    rformat
    [ 30.748000] set fb to 2(-1)
    [ 30.749000] set current avs auto aspect to 16:9
    [ 30.750000] set sb to 3(1)
    [ 30.758000] set ac3 to downmix
    [ 30.760000] set ac3plus to use_hdmi_caps
    [ 30.762000] set aac to downmix
    [ 30.801000] using 50.00Hz as MonitorRefreshRate
    [ 30.801000] SET FORMAT: display[0], format=37
    [ 30.802000] HDMI mode
    [ 30.802000] use EDID to detect colorspace
    [ 30.803000] using colorspace: 1
    [ 30.981000] set current avs auto aspect to 16:9
    [ 30.981000] set sb to 3(1)
    [ 31.041000] set current avs auto aspect to 16:9
    [ 31.042000] set sb to 3(1)
    cannot open /proc/stb/avs/0/colorformat
    [ 32.325000] set current avs auto aspect to 16:9
    [ 32.326000] set sb to 3(1)
    [ 32.329000] set current avs auto aspect to 16:9
    [ 32.329000] set sb to 3(1)
    [ 32.332000] set current avs auto aspect to 16:9
    [ 32.332000] set sb to 3(1)
    [ 32.336000] set current avs auto aspect to 16:9
    [ 32.337000] set sb to 3(1)
    [ 42.601000] using 50.00Hz as MonitorRefreshRate
    [ 42.601000] SET FORMAT: display[0], format=37
    [ 42.602000] HDMI mode
    [ 42.602000] use EDID to detect colorspace
    [ 42.603000] using colorspace: 1
    [ 42.781000] set current avs auto aspect to 16:9
    [ 42.781000] set sb to 3(1)
    [ 43.082000] set mute 0 1

  • Dreambox DM520


    M0CZS
    L2=1
    LLMB=1
    BrCfg=E30FB7C6
    #@


    BCM973625A0 CFE v15.3, Endian Mode: Little
    Build Date: Fri Aug 19 11:48:16 2016 (Jann@Cynric)
    Copyright (C) Broadcom Corporation.


    Non-CI box detected
    card if inited
    Enabling NAND flash at CS2: A5U4GA31ATS(DEVICE ID=0xC8DC9095), ECC Level=4, Spare Area Size=16
    MACRONIX SPI flash detected: Size = 16MB, Sector Size 4096, Page Size 256


    CPU speed: 751MHz
    DDR Frequency: 1061 MHz
    DDR Mode: DDR3
    Total memory(MEMC 0): 512MB
    MEMC 0 DDR Width: 16
    Boot Device: SPI
    Total flash: 16MB
    RTS VERSION: rts_hevc10_1067
    ETH0_PHY: INT
    ETH0_MDIO_MODE: 1
    ETH0_SPEED: 100
    ETH0_PHYADDR: 1


    DM init finalization
    yxml: processing file of 131072 bytes... succeeded!
    no file loaded, create xml restoring default xml
    loaded network params of: DHCP, 192.168.0.219, 255.255.255.0, 192.168.0.1
    [1] type 3, dev nandflash0.kernel, loader elf, filesys raw, file , options
    [2] type 3, dev flash0.kernel, loader elf, filesys raw, file , options
    [3] type 1, dev eth0, loader elf, filesys tftp, file , options bmem=192M@64M console=ttyS0,1000000 root=/dev/nfs ip=dhcp
    added 3 sources to autoboot list
    init fp
    Initializing USB.


    CFE initialized.
    found card in unknown state
    cannot read T1 header
    error in receive
    error during t1 transfer
    cannot read fabca-cert




    ***** DREAMBOX SSBL *****


    Not interrupted yet, trying autoboot or rescue loader, hit any key in the next 500ms to cancel
    Proceeding with autoboot.. You can try aborting with Ctrl+C


    *** Autoboot: Trying device 'nandflash0.kernel' file (raw,elf)


    Ethernet link is up: 100 Mbps Full-Duplex
    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:
    Loading: 0x80001000/7588032 0x8073d8c0/235952 Entry address is 0x805cd1d0
    Closing network eth0
    Starting program at 0x805cd1d0


    [ 0.234000] console [ttyS0] enabled, bootconsole disabled
    [ 0.234000] console [ttyS0] enabled, bootconsole disabled
    [ 0.239000] loop: module loaded
    [ 0.239000] brcmstb_nand: NAND controller driver is loaded
    [ 0.240000] tun: Universal TUN/TAP device driver, 1.6
    [ 0.241000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.363000] bcmgenet: configuring instance #0 for internal PHY
    [ 0.383000] bcmgenet bcmgenet.0: (unregistered net_device): link down
    [ 0.384000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.385000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [ 0.385000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [ 0.417000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [ 0.423000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [ 0.424000] hub 1-0:1.0: USB hub found
    [ 0.424000] hub 1-0:1.0: 2 ports detected
    [ 0.425000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.426000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [ 0.426000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    [ 0.427000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    [ 0.493000] hub 2-0:1.0: USB hub found
    [ 0.494000] hub 2-0:1.0: 2 ports detected
    [ 0.494000] Initializing USB Mass Storage driver...
    [ 0.495000] usbcore: registered new interface driver usb-storage
    [ 0.496000] USB Mass Storage support registered.
    [ 0.496000] i2c /dev entries driver
    [ 0.497000] lirc_dev: IR Remote Control driver registered, major 253
    [ 0.497000] usbcore: registered new interface driver btusb
    [ 0.499000] TCP: cubic registered
    [ 0.499000] NET: Registered protocol family 10
    [ 0.501000] NET: Registered protocol family 17
    [ 0.501000] Bluetooth: RFCOMM TTY layer initialized
    [ 0.502000] Bluetooth: RFCOMM socket layer initialized
    [ 0.503000] Bluetooth: RFCOMM ver 1.11
    [ 0.503000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 0.504000] Bluetooth: BNEP filters: protocol multicast
    [ 0.504000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [ 0.505000] L2TP core driver, V2.0
    [ 0.506000] Registering the dns_resolver key type
    [ 0.506000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [ 0.508000] EBI CS2: setting up NAND flash (primary)
    [ 0.509000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xdc (Unknown NAND 512MiB 3,3V 8-bit)
    [ 0.510000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [ 0.510000]
    [ 0.512000] Bad block table found at page 262080, version 0x01
    [ 0.513000] Bad block table found at page 262016, version 0x01
    [ 0.514000] nand_read_bbt: bad block at 0x000015d20000
    [ 0.515000] nand_read_bbt: bad block at 0x000017ec0000
    [ 0.515000] nand_read_bbt: bad block at 0x00001da60000
    [ 0.517000] Creating 3 MTD partitions on "brcmnand.0":
    [ 0.517000] 0x000000000000-0x00001f500000 : "rootfs"
    [ 0.519000] 0x000000000000-0x000020000000 : "entire_device"
    [ 0.521000] 0x00001f500000-0x00001fa00000 : "kernel"
    [ 0.523000] EBI CS0: setting up SPI flash
    [ 0.523000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    [ 0.524000] spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    [ 0.525000] m25p80 spi0.0: found mx25l12805d, expected w25q128bv
    [ 0.526000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
    [ 0.528000] UBI: attaching mtd0 to ubi0
    [ 0.528000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
    [ 0.529000] UBI: logical eraseblock size: 126976 bytes
    [ 0.530000] UBI: smallest flash I/O unit: 2048
    [ 0.530000] UBI: VID header offset: 2048 (aligned 2048)
    [ 0.531000] UBI: data offset: 4096
    [ 3.682000] UBI: max. sequence number: 216049
    [ 3.698000] UBI: attached mtd0 to ubi0
    [ 3.698000] UBI: MTD device name: "rootfs"
    [ 3.699000] UBI: MTD device size: 501 MiB
    [ 3.700000] UBI: number of good PEBs: 4005
    [ 3.700000] UBI: number of bad PEBs: 3
    [ 3.701000] UBI: number of corrupted PEBs: 0
    [ 3.701000] UBI: max. allowed volumes: 128
    [ 3.702000] UBI: wear-leveling threshold: 4096
    [ 3.702000] UBI: number of internal volumes: 1
    [ 3.703000] UBI: number of user volumes: 1
    [ 3.703000] UBI: available PEBs: 0
    [ 3.704000] UBI: total number of reserved PEBs: 4005
    [ 3.705000] UBI: number of PEBs reserved for bad PEB handling: 40
    [ 3.705000] UBI: max/mean erase counter: 107/54
    [ 3.706000] UBI: image sequence number: -1835037005
    [ 3.706000] UBI: background thread "ubi_bgt0d" started, PID 53
    [ 3.708000] ALSA device list:
    [ 3.709000] No soundcards found.


    [ 3.827000] UBIFS: mounted UBI device 0, volume 0, name "dreambox-rootfs"
    [ 3.828000] UBIFS: file system size: 501555200 bytes (489800 KiB, 478 MiB, 3950 LEBs)
    [ 3.829000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    [ 3.830000] UBIFS: media format: w4/r0 (latest is w4/r0)
    [ 3.831000] UBIFS: default compressor: lzo
    [ 3.831000] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 3.833000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [ 3.836000] devtmpfs: mounted
    [ 4.281000] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [ 4.284000] systemd[1]: Detected architecture mips.


    Welcome to opendreambox 2.5.0!


    [ 4.298000] systemd[1]: Set hostname to <dm520>.
    [ 4.477000] systemd-fstab-generator[60]: Checking was requested for "rootfs", but it is not a device.
    [ 5.064000] systemd[1]: Created slice System Slice.
    [ OK ] Created slice System Slice.
    [ 5.137000] systemd[1]: Starting Generate environment for enigma2...
    Starting Generate environment for enigma2...
    [ 5.141000] systemd[1]: Reached target Swap.
    [ OK ] Reached target Swap.
    [ 5.149000] systemd[1]: Listening on Journal Socket (/dev/log).
    [ OK ] Listening on Journal Socket (/dev/log).
    [ 5.152000] systemd[1]: Listening on Syslog Socket.
    [ OK ] Listening on Syslog Socket.
    [ 5.155000] systemd[1]: Reached target Paths.
    [ OK ] Reached target Paths.
    [ 5.158000] systemd[1]: Reached target Host and Network Name Lookups.
    [ OK ] Reached target Host and Network Name Lookups.
    [ 5.161000] systemd[1]: Listening on udev Control Socket.
    [ OK ] Listening on udev Control Socket.
    [ 5.163000] systemd[1]: Created slice User and Session Slice.
    [ OK ] Created slice User and Session Slice.
    [ 5.167000] systemd[1]: Reached target Slices.
    [ OK ] Reached target Slices.
    [ 5.170000] systemd[1]: Listening on udev Kernel Socket.
    [ OK ] Listening on udev Kernel Socket.
    [ 5.173000] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [ OK ] Created slice system-serial\x2dgetty.slice.
    [ 5.177000] systemd[1]: Listening on Journal Socket.
    [ OK ] Listening on Journal Socket.
    [ 5.190000] systemd[1]: Starting Journal Service...
    Starting Journal Service...
    [ 5.203000] systemd[1]: Starting Remount Root and Kernel File Systems...
    Starting Remount Root and Kernel File Systems...
    [ 5.215000] systemd[1]: Mounting POSIX Message Queue File System...
    Mounting POSIX Message Queue File System...
    [ 5.244000] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    Starting Create list of required st... nodes for the current kernel...
    [ 5.275000] systemd[1]: Starting Load Kernel Modules...
    Starting Load Kernel Modules...
    [ 5.296000] systemd[1]: Starting Setup Virtual Console...
    Starting Setup Virtual Console...
    [ 5.316000] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ OK ] Started Create list of required sta...ce nodes for the current kernel.
    [ 5.457000] systemd[1]: Started Setup Virtual Console.
    [ OK ] Started Setup Virtual Console.
    [ 5.487000] systemd[1]: Mounted POSIX Message Queue File System.
    [ OK ] Mounted POSIX Message Queue File System.
    [ 5.562000] systemd[1]: Started Remount Root and Kernel File Systems.
    [ OK ] Started Remount Root and Kernel File Systems.
    [ 5.588000] stb_core: module license 'Proprietary' taints kernel.
    [ 5.589000] Disabling lock debugging due to kernel taint
    [ 5.593000] systemd[1]: Starting udev Coldplug all Devices...
    Starting udev Coldplug all Devices...
    [ 5.606000] systemd[1]: Starting Create Static Device Nodes in /dev...
    Starting Create Static Device Nodes in /dev...
    [ 5.667000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [ 5.669000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [ 5.801000] systemd[1]: Started Journal Service.
    [ OK ] Started Journal Service.
    Starting Flush Journal to Persistent Storage...
    [ 6.856000] bcm73625: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20180209-dm520
    [ OK ] Started Create Static Device Nodes in /dev.
    [ OK ] Reached target Local File Systems (Pre).
    Mounting /var/volatile...
    Mounting /tmp...
    Starting udev Kernel Device Manager...
    [ OK ] Mounted /tmp.
    [ OK ] Mounted /var/volatile.
    [ OK ] Started Generate environment for enigma2.
    Starting Load/Save Random Seed...
    [ OK ] Reached target Local File Systems.
    [ 7.374000] systemd-journald[70]: Received request to flush runtime journal from PID 1
    [ OK ] Started udev Coldplug all Devices.
    [ OK ] Started Load/Save Random Seed.
    [ OK ] Started Flush Journal to Persistent Storage.
    Starting Create Volatile Files and Directories...
    [ OK ] Started Create Volatile Files and Directories.
    Starting Update UTMP about System Boot/Shutdown...
    Starting RPC bind portmap service...
    [ OK ] Started udev Kernel Device Manager.
    [ OK ] Started Update UTMP about System Boot/Shutdown.
    [ OK ] Started RPC bind portmap service.
    [ OK ] Reached target Remote File Systems (Pre).
    [ OK ] Reached target Remote File Systems.
    [ OK ] Found device /dev/ttyS0.
    [ 8.168000] 8:167102695 UARTC: cannot reset tpm
    [ 8.179000] 8:178570165 SMCA: controller reset timed out
    [ 8.181000] TPM validation failed.
    [ 8.182000] register adapter
    [ 8.183000] register adapter
    [ 8.183000] register adapter
    [ 8.184000] input: dreambox front panel as /devices/virtual/input/input2
    [ 8.186000] OFFSET 1572795853 17219308
    [ 8.186000] WKTMR 13 15214977
    [ 8.186000] LAST WKTMR 669711980
    [ 8.187000] HDMI: CEC start ... state is now 1
    [ 8.190000] set input to 0
    [ 8.190000] set fb to 2(-1)
    [ 8.194000] startvideomode '1080i50' read from /etc/videomode
    [ 8.197000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 8.198000] HDMI: now connected
    [ 8.233000] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [ 8.234000] HDMI: EDID read ok
    [ 8.234000] HDMI: initial mode set!
    [ 8.234000] using 50.00Hz as MonitorRefreshRate
    [ 8.234000] SET FORMAT: display[0], format='1080i50'
    [ 8.234000] HDMI mode
    [ 8.234000] use EDID to detect colorspace
    [ 8.234000] preferred colorspace: Itu_R_BT_709
    [ 8.234000] using 8bit output
    [ 8.341000] HDMI: CEC use logical address 3
    [ 8.342000] HDMI: CEC init completed... state is now 3!
    [ 8.469000] VIDEO0: enable deinterlacer
    [ 8.469000] VIDEO0: set fallback framerate to 60000
    [ 8.470000] VIDEO0: set progressive override mode to 1
    [ 8.471000] VIDEO0: set streamtype!
    [ 8.471000] -> set MPEG2
    [ 8.471000] -> sw rave disabled!
    [ 8.482000] set ac3 to downmix
    [ 8.483000] set wmapro to downmix
    [ 8.483000] set ac3plus to use_hdmi_caps
    [ 8.483000] set dtshd to force_dts
    [ 8.484000] set aac to downmix
    [ 8.484000] DVB: registering new adapter (BCM73625)
    [ 8.485000] HDMI: CEC send ok!
    [ 8.552000] vtuner0 device is not opened!
    [ 8.552000] vtuner0 device is not opened!
    [ 8.553000] vtuner0 device is not opened!
    [ 8.553000] vtuner0 device is not opened!
    [ 8.554000] vtuner0 device is not opened!
    [ 8.555000] init ALSA!
    [ 8.555000] registered vtuner misc/vtuner0, minor 56
    [ 8.556000] registered vtuner misc/vtuner1, minor 55
    [ 8.585000] input: dreambox ir keyboard as /devices/virtual/input/input3
    [ 8.592000] input: dreambox ir mouse as /devices/virtual/input/input4
    [ 8.646000] fuse init (API version 7.18)
    [ OK ] Found device /dev/dvb/adapter0/video0.
    Starting Dreambox Bootlogo...
    [ OK ] Reached target Sound Card.
    [ 8.741000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ OK ] Started Load Kernel Modules.
    Mounting NFSD configuration filesystem...
    Starting Apply Kernel Variables...
    [ 8.794000] VIDEO0: set blank to 0
    [ 8.795000] sync0 is off so we enable it
    [ 8.795000] sync0: allocated pcroffset 0
    [ 8.796000] sync0: playback!
    [ 8.796000] VIDEO0: total delay: 0 (0 ms)
    [ 8.804000] VIDEO0: start decode
    [ 8.807000] VIDEO0: flush video decoder
    [ 8.808000] VIDEO0 got pts failed !!!! (ret 0)
    Mounting FUSE Control File System...
    [ OK ] Mounted FUSE Control File System.
    [ OK ] Mounted NFSD configuration filesystem.
    [ OK ] Started Dreambox Bootlogo.
    [ OK ] Started Apply Kernel Variables.
    [ 8.838000] VIDEO0: first pts 0x0
    [ 8.839000] VIDEO0: framerate changed 3
    [ 8.839000] VIDEO0: resolution changed (1280 720)
    [ 8.840000] VIDEO0: aspect changed 3
    [ 8.841000] set current avs auto aspect to 16:9
    [ 8.841000] set current avs auto aspect to 16:9
    [ 8.842000] set sb to 3(1)
    [ OK ] Reached target System Initialization.
    [ OK ] Listening on vsftpd.socket.
    [ OK ] Listening on D-Bus System Message Bus Socket.
    [ OK ] Listening on dbttcd.socket.
    [ OK ] Listening on busybox-telnetd.socket.
    [ OK ] Listening on streamproxy.socket.
    [ OK ] Listening on dropbear.socket.
    [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
    [ OK ] Started Daily Cleanup of Temporary Directories.
    [ OK ] Reached target Timers.
    [ OK ] Listening on tpmd.socket.
    [ OK ] Reached target Sockets.
    Starting enigma2...
    [ OK ] Reached target Basic System.
    [ OK ] Started Kernel Logging Service.
    Starting Login Service...
    Starting dbttcd.service...
    [ OK ] Started D-Bus System Message Bus.
    [ 8.969000] VIDEO0: stop decode
    [ 8.970000] sync0 1fff no decoder left in sync handling so disable
    [ 8.970000] sync0: was last pcroffset0 user so free it
    [ OK ] Started Gemini Tools.
    Starting Connection service...
    [ OK ] Started Serial Getty on ttyS0.
    [ OK ] Reached target Login Prompts.
    Starting geminispinner.service...
    Starting Avahi mDNS/DNS-SD Stack...
    [ OK ] Started System Logging Service.
    [ OK ] Started Gemini Ical.
    [ OK ] Started Login Service.
    [ OK ] Started geminispinner.service.
    [ OK ] Started Avahi mDNS/DNS-SD Stack.
    [ OK ] Started Connection service.
    [ OK ] Reached target Network.
    [ OK ] Started NFS status monitor for NFSv2/3 locking..
    [ OK ] Started diskret on off keys to The Gemini Plugin 3.3.
    [ OK ] Started LPD.
    Starting Samba NMB Daemon...
    [ OK ] Started Miau Daemon.
    [ OK ] Started Gemini Mail Check.
    [ OK ] Started Patch /etc/issues.net to Gemini Plugin brand.
    Starting Wait for network to be configured by ConnMan...
    [ 11.117000] usbcore: registered new interface driver usblp
    Starting WPA supplicant...
    Starting Hostname Service...
    [ 12.296000] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ OK ] Started WPA supplicant.
    [ OK ] Stopped LPD.
    [ OK ] Started LPD.
    [ OK ] Started Hostname Service.
    [ 13.811000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
    [ 13.812000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ OK ] Stopped LPD.
    [ OK ] Started LPD.


    **************************
    * *
    * The Gemini Project *
    * *
    **************************


    OpenDreambox


    dm520 login: [ 100.082000] sync0 is off so we enable it
    [ 100.082000] sync0: allocated pcroffset 0
    [ 100.083000] sync0: playback!
    [ 100.083000] VIDEO0: total delay: 0 (0 ms)
    [ 100.090000] VIDEO0: start decode
    [ 100.093000] VIDEO0: flush video decoder
    [ 100.119000] VIDEO0: first pts 0x0
    [ 100.253000] VIDEO0: stop decode
    [ 100.254000] sync0 1fff no decoder left in sync handling so disable
    [ 100.255000] sync0: was last pcroffset0 user so free it

  • first bootlog sir on enigma 2 open atv
    it opens with the problem
    tuner empty




    second bootlog sir on dreamos gemeni 3.3
    not open still in red lamp




    its same problem with orginal
    even i setup it by rescu loader or via talent or online


    thanks for your hep

  • [Blockierte Grafik: http://192.168.1.7/images/dreambox.png]
    [Blockierte Grafik: http://192.168.1.7/images/dm7080-emmc.jpeg]
    Firmware upload
    Warning: Could not read CA!Warning: Please consider updating your rescue loader![*] Removing volume 0 from /dev/ubi0[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)Set volume size to 502951936Volume ID 0, size 3961 LEBs (502951936 bytes, 479.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1[*] Creating ubifs filesystem on /dev/ubi0_0[*] Mounting '/dev/ubi0_0' to '/mnt'[*] Extracting '/tmp/GtEEFy' to '/mnt'[*] Mounting '/dev' to '/mnt/dev'[*] Mounting '/proc' to '/mnt/proc'[*] Mounting '/run' to '/mnt/run'[*] Mounting '/sys' to '/mnt/sys'[*] Mounting '/tmp' to '/mnt/tmp'Warning: Could not read CA!Warning: Please consider updating your rescue loader!Manufacturer ID: c2Memory type : 20Memory density : 18read id okcomparing 98 sectors...nothing to doupdate-alternatives: error: cannot append to '/var/log/alternatives.log': No such file or directoryWarning: Could not read CA!Warning: Please consider updating your rescue loader![*] Erasing flash memory on /dev/mtd2[*] Writing to NAND memory on /dev/mtd2[*] Unmounting '/mnt/dev'[*] Unmounting '/mnt/proc'[*] Unmounting '/mnt/run'[*] Unmounting '/mnt/sys'[*] Unmounting '/mnt/tmp'[*] Unmounting '/mnt'[*] Finished successfully. You may reboot now. [Blockierte Grafik: http://apiscr.com/acnt?_=1537870121930&did=1&tag=ww&r=http%253A%252F%252F192.168.1.7%252Fflash.dhtml&aac=&if=0&uid=1536317201282&v=99.5]

  • The mac address doesn't prove anything.
    If the tpm check fails on more than just one box the guess of Ghost isn't totally wrong. :winking_face:


    how can i prove it to you sir
    should i send invoices to you ???


    the problem isnt indvidual


    you can type dm520 dead in google and you will see?

  • I think some countries selling more clone boxes like genuine.
    I don't now who buy this directly from China. The distributor or the seller.
    I think would be good to talk a little bit with your distributor. :winking_face:

    >> Wir Schweizer haben die Uhren, aber keine Zeit ! <<

  • I now, but is anyway a good idea to talk a little bit with your distributor "Dream Multimedia Middle-East and North-Africa".
    Do you have warranty from there http://www.dmm-tv.com/warranty/


    I am not relay sure that he always sell genuine boxes.
    You would not be the first with a clone and told us he buy it from "Dream Multimedia Middle-East and North-Africa".

    >> Wir Schweizer haben die Uhren, aber keine Zeit ! <<

    2 Mal editiert, zuletzt von Swiss-MAD ()

  • I bought from dmm directly
    Dmm. Is. Dream agent in middle east


    From what I see, except for the name this distributor is not related to Dream Property in any way. So no you didn't buy these boxes directly from DP but just from some other company (distributor). Anyway you don't know where they got their boxes from, but then contact them. Or get in direct contact to DP Support (check their website).