Hallo
Ich habe ein DM900 eine freundes die nur in den Rescue Mode startet.
Rescue Loader habe ich upgedated. (zImage-rescue-3.14-r0-dm900-20180425.bin)
root@dm900:~# run-recovery
Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery.sig'
Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery'
Verifying signature of 'recovery'
gpgv: Signature made Wed Dec 21 02:02:08 2016 UTC using RSA key ID 7DA27561
gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"
Running './recovery'
Fatal: Target device '/dev/mmcblk0' is not writable
Fatal: Failed to execute './recovery'
Code
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2 a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON
single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=0000038a(906)
temperature=0000c3e3(50147)
PV=0000034c(844)
MV=0000038a(906)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss 07080cd0
_ebss 0713dd70
_end 0713dd90
HEAP @ 07200000
STACK @ 09300000
ARCH: CONFIG OK
CLR BSS 07080cd0 to 0713dd70 OK
CLR SRAM OK
CACHE FLUSH OK
CPU CLKSET OK
GO!
,/
,'/___, BOLT v1.18 v1.18 LOCAL BUILD
.'__ ,' (2016-12-01 16:24:31 cynric@cynric-VirtualBox)
/,' Copyright (C) 2016 Broadcom
/'
Board: BCM97252SSFF
SYS_CTRL: product=72521, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovi sion_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000001 power_on (1 of 23 possible causes)
CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
EMMC1: transfer complete intr error, intr=0x608000
Command 8 failed
EMMC1: device failed to enter transfer mode
CS1: NAND: unrecognized ID: 0xfefefefe 0xfefefefe
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 5
card if inited
set pwm to 0/255
disp id 5420
load image
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.906V, T=+52.095C, PV=0.844V, MV=0.906V, FW=30333278 [0.3.2.x]
USB otp=00000040
USB @ 0xf0470200: IPP is active low, IOC is negative polarity
init fp
found card in unknown state
ca valid!
set pwm to 200/255
Normal bootup
Default boot device not found!
Booting failed. Running recovery
Loader:zimg Filesys:raw Dev:flash0.recovery File: Options:(null)
Reading 11389864 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7716000)
32 bit boot...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-1.15-dm900 (dm900@opendreambox.org) (gcc versi on 5.3.0 (GCC) ) #9 SMP Fri Dec 9 17:20:01 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: BCM97252SSFF
[ 0.000000] moving dtb from 0x0000000007716000 to 0x0000000000ee29b0
[ 0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
[ 0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] MCP: Enabling write pairing
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s9024 r8192 d15552 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 523776
[ 0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0 ,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 1000076K/2097152K available (5897K kernel code, 211K rwda ta, 1480K rodata, 7404K init, 206K bss, 1080692K reserved, 16384K cma-reserved, 786428K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc073c7c0 (7378 kB)
[ 0.000000] .init : 0xc073d000 - 0xc0e78340 (7405 kB)
[ 0.000000] .data : 0xc0e7a000 - 0xc0eaeea0 ( 212 kB)
[ 0.000000] .bss : 0xc0eaeea8 - 0xc0ee29b0 ( 207 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 25451 65795328ns
[ 0.000009] Switching to timer-based delay loop
[ 0.000235] Console: colour dummy device 80x30
[ 0.000254] Calibrating delay loop (skipped), value calculated using timer fr equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000262] pid_max: default: 32768 minimum: 301
[ 0.000353] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000359] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.005852] Initializing cgroup subsys devices
[ 0.005866] Initializing cgroup subsys freezer
[ 0.005873] Initializing cgroup subsys net_cls
[ 0.005900] CPU: Testing write buffer coherency: ok
[ 0.006119] CPU0: update cpu_power 1024
[ 0.006125] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.006173] Setting up static identity map for 0x5a06a0 - 0x5a06f8
[ 0.007384] CPU1: Booted secondary processor
[ 0.007404] CPU1: update cpu_power 1024
[ 0.007406] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007499] Brought up 2 CPUs
[ 0.007508] SMP: Total of 2 processors activated.
[ 0.007513] CPU: All CPU(s) started in SVC mode.
[ 0.007889] devtmpfs: initialized
[ 0.011430] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.011977] regulator-dummy: no parameters
[ 0.012171] NET: Registered protocol family 16
[ 0.012756] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.012941] cpuidle: using governor ladder
[ 0.012947] cpuidle: using governor menu
[ 0.014064] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
[ 0.014162] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.015822] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] regist ered
[ 0.015897] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] regist ered
[ 0.015964] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] regist ered
[ 0.016028] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] regist ered
[ 0.016092] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] regist ered
[ 0.016172] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] regist ered
[ 0.016236] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] regist ered
[ 0.016298] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] regist ered
[ 0.016359] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] regist ered
[ 0.016428] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] regist ered
[ 0.016494] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] regist ered
[ 0.016558] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] regist ered
[ 0.016620] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] regist ered
[ 0.016685] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] regist ered
[ 0.016984] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.017224] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[ 0.021191] bio: create slab <bio-0> at 0
[ 0.021484] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM71 20_L2_IRQ if you want GPIO interrupt support
[ 0.021509] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[ 0.021540] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM71 20_L2_IRQ if you want GPIO interrupt support
[ 0.021553] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[ 0.021910] SCSI subsystem initialized
[ 0.022124] usbcore: registered new interface driver usbfs
[ 0.022170] usbcore: registered new interface driver hub
[ 0.022232] usbcore: registered new device driver usb
[ 0.022274] pps_core: LinuxPPS API ver. 1 registered
[ 0.022277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 0.022288] PTP clock support registered
[ 0.022511] Advanced Linux Sound Architecture Driver Initialized.
[ 0.022798] Bluetooth: Core ver 2.18
[ 0.022810] NET: Registered protocol family 31
[ 0.022814] Bluetooth: HCI device and connection manager initialized
[ 0.022822] Bluetooth: HCI socket layer initialized
[ 0.022828] Bluetooth: L2CAP socket layer initialized
[ 0.022835] Bluetooth: SCO socket layer initialized
[ 0.023230] Switched to clocksource arch_sys_counter
[ 0.023242] cfg80211: Calling CRDA to update world regulatory domain
[ 0.027598] thermal thermal_zone0: failed to read out thermal zone 0
[ 0.027680] NET: Registered protocol family 2
[ 0.028064] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.028080] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.028103] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.028136] TCP: reno registered
[ 0.028142] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.028155] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.028284] NET: Registered protocol family 1
[ 0.028507] RPC: Registered named UNIX socket transport module.
[ 0.028512] RPC: Registered udp transport module.
[ 0.028514] RPC: Registered tcp transport module.
[ 0.028518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.244453] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.244779] bounce pool size: 64 pages
[ 0.245350] NFS: Registering the id_resolver key type
[ 0.245383] Key type id_resolver registered
[ 0.245387] Key type id_legacy registered
[ 0.245397] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.245529] SGI XFS with ACLs, security attributes, realtime, large block/ino de numbers, no debug enabled
[ 0.245828] msgmni has been set to 449
[ 0.246586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
[ 0.246593] io scheduler noop registered
[ 0.246609] io scheduler cfq registered (default)
[ 0.246833] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[ 0.247120] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device T ree
[ 0.312520] brcmstb_memc f1102000.memc-ddr: registered
[ 0.312547] brcmstb_memc f1182000.memc-ddr: registered
[ 0.312701] brcm-waketimer f0417580.waketimer: registered, with irq 260
[ 0.312913] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.313796] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[ 0.409827] console [ttyS0] enabled
[ 0.411064] loop: module loaded
[ 0.411712] ahci brcmstb-ahci.0: can't get clock
[ 0.412331] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[ 0.423242] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 i mpl platform mode
[ 0.424238] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum p art
[ 0.426708] scsi0 : ahci_platform
[ 0.427339] scsi1 : ahci_platform
[ 0.427842] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 00 irq 91
[ 0.428762] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 80 irq 91
[ 0.430174] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[ 0.430956] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[ 0.434285] m25p80 spi32766.0: found mx25l25635e, expected m25p80
[ 0.435003] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
[ 0.435742] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
[ 0.436392] 5 ofpart partitions found on MTD device spi32766.0
[ 0.437062] Creating 5 MTD partitions on "spi32766.0":
[ 0.437667] 0x000000000000-0x000000200000 : "flash0.bolt"
[ 0.438822] 0x000000200000-0x000000220000 : "flash0.nvram"
[ 0.439863] 0x000000220000-0x000000240000 : "flash0.devtree"
[ 0.440911] 0x000000240000-0x000001000000 : "flash0.recovery"
[ 0.441975] 0x000000000000-0x000002000000 : "flash0"
[ 0.443343] libphy: Fixed MDIO Bus: probed
[ 0.443949] tun: Universal TUN/TAP device driver, 1.6
[ 0.444544] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.445595] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.459233] libphy: bcmgenet MII bus: probed
[ 0.482090] xhci-brcm: xHCI BRCM driver
[ 0.482629] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.483304] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[ 0.484436] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
[ 0.485630] hub 1-0:1.0: USB hub found
[ 0.486082] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 0.487022] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.487689] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[ 0.488982] hub 2-0:1.0: USB hub found
[ 0.489443] hub 2-0:1.0: 2 ports detected
[ 0.490205] ehci-brcm: EHCI BRCM driver
[ 0.490731] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[ 0.491405] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[ 0.502402] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
[ 0.508235] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.509313] hub 3-0:1.0: USB hub found
[ 0.509765] hub 3-0:1.0: 1 port detected
[ 0.510415] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[ 0.511074] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[ 0.522060] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
[ 0.528234] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.529294] hub 4-0:1.0: USB hub found
[ 0.529744] hub 4-0:1.0: 1 port detected
[ 0.530441] ohci-brcm: OHCI BRCM driver
[ 0.530940] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[ 0.531609] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[ 0.532529] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
[ 0.588611] hub 5-0:1.0: USB hub found
[ 0.589061] hub 5-0:1.0: 1 port detected
[ 0.589781] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[ 0.590452] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 0.591372] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[ 0.646610] hub 6-0:1.0: USB hub found
[ 0.647062] hub 6-0:1.0: 1 port detected
[ 0.647763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.648522] ehci-pci: EHCI PCI platform driver
[ 0.649072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.649788] ohci-pci: OHCI PCI platform driver
[ 0.650416] usbcore: registered new interface driver usb-storage
[ 0.651244] i2c /dev entries driver
[ 0.651982] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d river
[ 0.652965] usbcore: registered new interface driver btusb
[ 0.653661] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 0.654437] sdhci: Secure Digital Host Controller Interface driver
[ 0.655145] sdhci: Copyright(c) Pierre Ossman
[ 0.655657] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.657416] mmc0: no vqmmc regulator found
[ 0.657888] mmc0: no vmmc regulator found
[ 0.688240] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using A DMA
[ 0.690145] mmc1: no vqmmc regulator found
[ 0.690625] mmc1: no vmmc regulator found
[ 0.699249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.721234] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A DMA
[ 0.724213] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.724907] usbcore: registered new interface driver usbhid
[ 0.727573] usbhid: USB HID core driver
[ 0.728062] ata1.00: ATA-10: ST1000LX015-1U7172, SDM1, max UDMA/133
[ 0.728796] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.729678] TCP: cubic registered
[ 0.730112] NET: Registered protocol family 10
[ 0.731115] NET: Registered protocol family 17
[ 0.731866] Bluetooth: RFCOMM TTY layer initialized
[ 0.732445] Bluetooth: RFCOMM socket layer initialized
[ 0.733035] Bluetooth: RFCOMM ver 1.11
[ 0.733479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.734090] Bluetooth: BNEP filters: protocol multicast
[ 0.734700] Bluetooth: BNEP socket layer initialized
[ 0.735280] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.735963] Bluetooth: HIDP socket layer initialized
[ 0.736585] l2tp_core: L2TP core driver, V2.0
[ 0.737103] Key type dns_resolver registered
[ 0.737660] Registering SWP/SWPB emulation handler
[ 0.738481] regulator-dummy: disabling
[ 0.741102] ALSA device list:
[ 0.741459] No soundcards found.
[ 0.770027] ata1.00: configured for UDMA/133
[ 0.770738] scsi 0:0:0:0: Direct-Access ATA ST1000LX015-1U71 SDM1 PQ : 0 ANSI: 5
[ 0.772126] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/93 1 GiB)
[ 0.773036] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.773775] sd 0:0:0:0: [sda] Write Protect is off
[ 0.774389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 0.793726] mmc1: error -84 whilst initialising MMC card
[ 0.884237] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.901264] mmc1: error -84 whilst initialising MMC card
[ 1.019107] mmc1: error -84 whilst initialising MMC card
[ 1.169954] mmc1: error -84 whilst initialising MMC card
[ 2.099325] sda: sda1 sda2
[ 2.100427] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.103680] Freeing unused kernel memory: 7404K (c073d000 - c0e78000)
INIT: version 2.88 booting
Starting udev
starting version 229
[ 2.182299] random: systemd-udevd urandom read with 20 bits of entropy availa ble
[ 2.581109] stb_core: module license 'Proprietary' taints kernel.
[ 2.581833] Disabling lock debugging due to kernel taint
bootlogd: cannot allocate pseudo tty: No such file or directory
Fri Dec 9 17:19:33 UTC 2016
INIT: Entering runlevel: 5
Configuring network interfaces... [ 2.936238] f0b00000.etherne:01: Broadcom B CM7439 (2) PHY revision: 0x10, patch: 1
[ 2.940935] f0b00000.ethernet: configuring instance for internal PHY
[ 2.941732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 4.941438] libphy: f0b00000.etherne:01 - Link is Down
Sending discover...
[ 6.783873] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[ 6.784644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 192.168.70.218...
Lease of 192.168.70.218 obtained, lease time 259200
/etc/udhcpc.d/50default: Adding DNS 192.168.70.1
done.
Starting Dropbear SSH server: Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCpqpTq+256ySajygiP5zBqcW+EON8kRDW/ozEkIiw8 diPFgfzAxFLwCof62SaIw2K6E3cpAPaThr9VPvNz/gclk2FMYdKKu/+QZmGswohpMB0GaGvKqu0ztKEM mXDq/sDMOFZ9DUun3NUIRY0lpa9aPWWFDGggopYnqKuz2PC3D/f3XbGfOgSRjlkypPjjZSXFoCBiphD0 lipe7G+UnLSvwiZP7M0tVkebzQexMmm8voWGwvAtKIa//V5n2b/yKKMGA97U22+D4B3FTICkGOgRRifo im4VA7hVEUJQD5lkIFSQmkLibFrIxACmEeHBnbQy+c9GxCHdidbmFyzfRtMD root@dm900
Fingerprint: md5 e7:af:3f:ca:ae:c5:83:a0:8c:8c:f4:47:4b:2a:a2:f6
dropbear.
Starting recovery-ui.
Starting tpmd.
Starting internet superserver: xinetd.
Starting Lighttpd Web Server: lighttpd.
2016-12-09 17:19:41: (../../lighttpd-1.4.39/src/log.c.194) server started
opendreambox 2.5.0 dm900 /dev/ttyS0
>>> Your Dreambox has booted into RESCUE MODE.
>>> Please log in as user 'root' (no password required),
>>> then run 'help' to get further information.
dm900 login: root
login[377]: root login on 'ttyS0'
root@dm900:~# [ 65.416088] random: nonblocking pool is initialized
Content-Type:
root@dm900:~#Code
root@dm900:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-1.17-dm900 (dm900@opendreambox.org) (gcc versi on 5.3.0 (GCC) ) #2 SMP Wed Apr 25 11:25:20 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: BCM97252SSFF
[ 0.000000] moving dtb from 0x0000000007716000 to 0x0000000000f4de70
[ 0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
[ 0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] HighMem zone: 3584 pages used for memmap
[ 0.000000] HighMem zone: 458752 pages, LIFO batch:31
[ 0.000000] MCP: Enabling write pairing
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
[ 0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 523776
[ 0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0 ,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 999648K/2097152K available (6114K kernel code, 214K rwdat a, 1588K rodata, 7508K init, 208K bss, 1081120K reserved, 16384K cma-reserved, 7 86428K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc078dcec (7704 kB)
[ 0.000000] .init : 0xc078e000 - 0xc0ee30c0 (7509 kB)
[ 0.000000] .data : 0xc0ee4000 - 0xc0f19b20 ( 215 kB)
[ 0.000000] .bss : 0xc0f19b28 - 0xc0f4de70 ( 209 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 25451 65795328ns
[ 0.000009] Switching to timer-based delay loop
[ 0.000236] Console: colour dummy device 80x30
[ 0.000257] Calibrating delay loop (skipped), value calculated using timer fr equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000265] pid_max: default: 32768 minimum: 301
[ 0.000357] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000363] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.005850] Initializing cgroup subsys devices
[ 0.005864] Initializing cgroup subsys freezer
[ 0.005871] Initializing cgroup subsys net_cls
[ 0.005898] CPU: Testing write buffer coherency: ok
[ 0.006117] CPU0: update cpu_power 1024
[ 0.006124] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.006175] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
[ 0.007388] CPU1: Booted secondary processor
[ 0.007407] CPU1: update cpu_power 1024
[ 0.007410] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007477] Brought up 2 CPUs
[ 0.007487] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.007492] CPU: All CPU(s) started in SVC mode.
[ 0.007877] devtmpfs: initialized
[ 0.011479] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.012044] regulator-dummy: no parameters
[ 0.012238] NET: Registered protocol family 16
[ 0.013169] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.013358] cpuidle: using governor ladder
[ 0.013362] cpuidle: using governor menu
[ 0.014484] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
[ 0.014566] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.016273] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] regist ered
[ 0.016348] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] regist ered
[ 0.016415] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] regist ered
[ 0.016481] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] regist ered
[ 0.016546] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] regist ered
[ 0.016612] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] regist ered
[ 0.016678] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] regist ered
[ 0.016741] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] regist ered
[ 0.016802] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] regist ered
[ 0.016871] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] regist ered
[ 0.016936] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] regist ered
[ 0.016999] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] regist ered
[ 0.017062] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] regist ered
[ 0.017141] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] regist ered
[ 0.017450] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.017674] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[ 0.022025] bio: create slab <bio-0> at 0
[ 0.022332] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM71 20_L2_IRQ if you want GPIO interrupt support
[ 0.022357] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[ 0.022385] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM71 20_L2_IRQ if you want GPIO interrupt support
[ 0.022397] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[ 0.022753] SCSI subsystem initialized
[ 0.022852] libata version 3.00 loaded.
[ 0.022968] usbcore: registered new interface driver usbfs
[ 0.022998] usbcore: registered new interface driver hub
[ 0.023060] usbcore: registered new device driver usb
[ 0.023081] media: Linux media interface: v0.10
[ 0.023107] Linux video capture interface: v2.00
[ 0.023144] pps_core: LinuxPPS API ver. 1 registered
[ 0.023165] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 0.023176] PTP clock support registered
[ 0.023396] Advanced Linux Sound Architecture Driver Initialized.
[ 0.023679] Bluetooth: Core ver 2.18
[ 0.023692] NET: Registered protocol family 31
[ 0.023696] Bluetooth: HCI device and connection manager initialized
[ 0.023704] Bluetooth: HCI socket layer initialized
[ 0.023711] Bluetooth: L2CAP socket layer initialized
[ 0.023717] Bluetooth: SCO socket layer initialized
[ 0.024122] Switched to clocksource arch_sys_counter
[ 0.024135] cfg80211: Calling CRDA to update world regulatory domain
[ 0.028486] thermal thermal_zone0: failed to read out thermal zone 0
[ 0.028569] NET: Registered protocol family 2
[ 0.028974] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.028990] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.029012] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.029044] TCP: reno registered
[ 0.029051] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.029062] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.029193] NET: Registered protocol family 1
[ 0.029420] RPC: Registered named UNIX socket transport module.
[ 0.029425] RPC: Registered udp transport module.
[ 0.029428] RPC: Registered tcp transport module.
[ 0.029431] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.029439] PCI: CLS 0 bytes, default 64
[ 0.246999] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.247369] bounce pool size: 64 pages
[ 0.247924] NFS: Registering the id_resolver key type
[ 0.247952] Key type id_resolver registered
[ 0.247958] Key type id_legacy registered
[ 0.247968] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.248130] SGI XFS with ACLs, security attributes, realtime, large block/ino de numbers, no debug enabled
[ 0.248439] msgmni has been set to 448
[ 0.249192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51)
[ 0.249201] io scheduler noop registered
[ 0.249220] io scheduler cfq registered (default)
[ 0.249456] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[ 0.249746] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device T ree
[ 0.315409] brcmstb_memc f1102000.memc-ddr: registered
[ 0.315436] brcmstb_memc f1182000.memc-ddr: registered
[ 0.315643] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.316446] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[ 0.317292] loop: module loaded
[ 0.317576] ahci brcmstb-ahci.0: can't get clock
[ 0.317658] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[ 0.328135] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 i mpl platform mode
[ 0.328142] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum p art
[ 0.329975] scsi0 : ahci_platform
[ 0.330227] scsi1 : ahci_platform
[ 0.330352] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 00 irq 91
[ 0.330358] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 80 irq 91
[ 0.330854] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[ 0.330904] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[ 0.333505] m25p80 spi32766.0: found mx25l25635e, expected m25p80
[ 0.333521] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
[ 0.333542] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
[ 0.333568] 5 ofpart partitions found on MTD device spi32766.0
[ 0.333572] Creating 5 MTD partitions on "spi32766.0":
[ 0.333581] 0x000000000000-0x000000200000 : "flash0.bolt"
[ 0.334103] 0x000000200000-0x000000220000 : "flash0.nvram"
[ 0.334534] 0x000000220000-0x000000240000 : "flash0.devtree"
[ 0.334926] 0x000000240000-0x000001000000 : "flash0.recovery"
[ 0.335342] 0x000000000000-0x000002000000 : "flash0"
[ 0.336045] libphy: Fixed MDIO Bus: probed
[ 0.336204] tun: Universal TUN/TAP device driver, 1.6
[ 0.336208] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.336543] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.349126] libphy: bcmgenet MII bus: probed
[ 0.371995] xhci-brcm: xHCI BRCM driver
[ 0.372080] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.372099] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[ 0.372412] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
[ 0.372553] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.372559] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.372564] usb usb1: Product: xHCI Host Controller
[ 0.372568] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
[ 0.372572] usb usb1: SerialNumber: f0471000.xhci_v2
[ 0.372906] hub 1-0:1.0: USB hub found
[ 0.372931] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 0.373045] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.373056] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[ 0.373201] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.373206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.373210] usb usb2: Product: xHCI Host Controller
[ 0.373214] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
[ 0.373218] usb usb2: SerialNumber: f0471000.xhci_v2
[ 0.373494] hub 2-0:1.0: USB hub found
[ 0.373516] hub 2-0:1.0: 2 ports detected
[ 0.373827] ehci-brcm: EHCI BRCM driver
[ 0.373899] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[ 0.373913] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[ 0.384026] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
[ 0.389124] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.389230] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.389236] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.389240] usb usb3: Product: EHCI Host Controller
[ 0.389244] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
[ 0.389248] usb usb3: SerialNumber: f0470300.ehci_v2
[ 0.389518] hub 3-0:1.0: USB hub found
[ 0.389540] hub 3-0:1.0: 1 port detected
[ 0.389743] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[ 0.389757] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[ 0.399851] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
[ 0.405128] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.405224] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.405230] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.405234] usb usb4: Product: EHCI Host Controller
[ 0.405238] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
[ 0.405242] usb usb4: SerialNumber: f0470500.ehci_v2
[ 0.405503] hub 4-0:1.0: USB hub found
[ 0.405526] hub 4-0:1.0: 1 port detected
[ 0.405770] ohci-brcm: OHCI BRCM driver
[ 0.405826] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[ 0.405840] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[ 0.405862] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
[ 0.440135] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.460256] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.460262] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.460266] usb usb5: Product: BRCM OHCI controller
[ 0.460270] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
[ 0.460274] usb usb5: SerialNumber: f0470400.ohci_v2
[ 0.460549] hub 5-0:1.0: USB hub found
[ 0.460572] hub 5-0:1.0: 1 port detected
[ 0.460774] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[ 0.460787] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 0.460809] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[ 0.515237] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.515242] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.515247] usb usb6: Product: BRCM OHCI controller
[ 0.515251] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
[ 0.515255] usb usb6: SerialNumber: f0470600.ohci_v2
[ 0.515535] hub 6-0:1.0: USB hub found
[ 0.515558] hub 6-0:1.0: 1 port detected
[ 0.515813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.515817] ehci-pci: EHCI PCI platform driver
[ 0.515856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.515861] ohci-pci: OHCI PCI platform driver
[ 0.515974] usbcore: registered new interface driver usb-storage
[ 0.515981] i2c /dev entries driver
[ 0.516027] lirc_dev: IR Remote Control driver registered, major 250
[ 0.516387] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d river
[ 0.516490] usbcore: registered new interface driver btusb
[ 0.516549] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 0.516722] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
[ 0.516794] sdhci: Secure Digital Host Controller Interface driver
[ 0.516796] sdhci: Copyright(c) Pierre Ossman
[ 0.516799] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.517901] mmc0: no vqmmc regulator found
[ 0.517907] mmc0: no vmmc regulator found
[ 0.548127] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using A DMA
[ 0.549194] mmc1: no vqmmc regulator found
[ 0.549198] mmc1: no vmmc regulator found
[ 0.552134] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.579125] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A DMA
[ 0.579233] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.579314] usbcore: registered new interface driver usbhid
[ 0.579317] usbhid: USB HID core driver
[ 0.581552] TCP: cubic registered
[ 0.581605] NET: Registered protocol family 10
[ 0.585073] NET: Registered protocol family 17
[ 0.585316] Bluetooth: RFCOMM TTY layer initialized
[ 0.585327] Bluetooth: RFCOMM socket layer initialized
[ 0.585330] Bluetooth: RFCOMM ver 1.11
[ 0.585334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.585337] Bluetooth: BNEP filters: protocol multicast
[ 0.585342] Bluetooth: BNEP socket layer initialized
[ 0.585346] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.585353] Bluetooth: HIDP socket layer initialized
[ 0.585397] l2tp_core: L2TP core driver, V2.0
[ 0.585421] Key type dns_resolver registered
[ 0.585493] Registering SWP/SWPB emulation handler
[ 0.585745] regulator-dummy: disabling
[ 0.585963] ALSA device list:
[ 0.585967] No soundcards found.
[ 0.586012] Warning: unable to open an initial console.
[ 0.648723] mmc1: error -84 whilst initialising MMC card
[ 0.679891] systemd-udevd[91]: starting version 230
[ 0.681455] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 0.681728] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 0.681772] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 0.681820] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 0.693923] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.694102] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.694158] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.694379] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.694866] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.695158] random: udevadm: uninitialized urandom read (16 bytes read, 0 bit s of entropy available)
[ 0.755879] mmc1: error -84 whilst initialising MMC card
[ 0.843534] systemd-udevd[113]: failed to execute '/lib/systemd/systemd-sysct l' '/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/eth0 --prefix=/net/ipv4/ neigh/eth0 --prefix=/net/ipv6/conf/eth0 --prefix=/net/ipv6/neigh/eth0': No such file or directory
[ 0.844419] systemd-udevd[105]: Process '/lib/systemd/systemd-sysctl --prefix =/net/ipv4/conf/eth0 --prefix=/net/ipv4/neigh/eth0 --prefix=/net/ipv6/conf/eth0 --prefix=/net/ipv6/neigh/eth0' failed with exit code 2.
[ 0.877823] mmc1: error -84 whilst initialising MMC card
[ 0.882605] systemd-udevd[114]: failed to execute '/lib/systemd/systemd-vcons ole-setup' '/lib/systemd/systemd-vconsole-setup': No such file or directory
[ 0.883017] systemd-udevd[99]: Process '/lib/systemd/systemd-vconsole-setup' failed with exit code 2.
[ 0.899093] bcmdriver: module license 'Proprietary' taints kernel.
[ 0.899103] Disabling lock debugging due to kernel taint
[ 0.899563] BCMDRV: Initializing bcmdriver version $ 8
[ 0.899573] BCMDRV: Total intc words=4,Total Irqs=129
[ 0.900270] BCMDRV: Initialization complete
[ 1.032078] mmc1: error -84 whilst initialising MMC card
[ 1.280129] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat ch: 1
[ 1.281799] f0b00000.ethernet: configuring instance for internal PHY
[ 1.281867] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.285239] libphy: f0b00000.etherne:01 - Link is Down
[ 4.211467] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[ 4.211488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 67.991061] random: nonblocking pool is initializedSieht für mich aus als ob was mit dem eMMC nicht stimmt.
Box einschicken, oder weiß noch jemand einen rat?
Gruß vom OnkelCWS
Code
root@dm900:~# sfdisk -l
Disk /dev/mtdblock0: 2 MiB, 2097152 bytes, 4096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mtdblock1: 128 KiB, 131072 bytes, 256 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mtdblock2: 128 KiB, 131072 bytes, 256 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mtdblock3: 13.8 MiB, 14417920 bytes, 28160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mtdblock4: 32 MiB, 33554432 bytes, 65536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@dm900:~#
