Dreambox 8000

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • If flashing keeps failing with DreamUp, you must consider a broken I2C chain. This is almost unreparable unless you can actually see something wrong on the PCB. Due to it's age you will have trouble to have it repaired. Mainboards are available at idiotic prices.
      Best option is to get a second hand DM8000 if you want to stay with the DM8000 or simply get a new receiver..

      The I2C bus is connected to every section of the hardware. Since you experienced problems before it may be as simple as a blown resistor(pack) or capacitor..
    • Ok thanks. What I checked was the Power Supply Voltages from pin 1 to 14 and they were all correct. (I found the readings in the Internet)
      A few days ago I changed two Electrolytic Capacitors from the P/S although they weren't bad just slightly out of capacitance.
      I had a look at the Sim which seemed to be Ok physically (electrically I don't know) Well that's about it
      Can't go further than that. I cannot check any I.C's or SMD's (surface mount devices).