Hallo zusammen, ich bin neu hier und hab gleich ein "schönes" Problem mitgebracht.
Ich habe hier eine DM520 die nach dem Versuch das aktuelle Newnigma2 Image zu flashen nicht mehr booten will.
Der Versuch das Original Image zu flashen brachte auch keinen Erfolg:
hier ein paar logs:
Code: bootlog nach dreambox-image-deb-dm520-20171017.tar.xz flash
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.10.21 16:55:28 =~=~=~=~=~=~=~=~=~=~=~=
Dreambox DM5 20
M0CZS
L2=1
LLMB=1
BrCfg=E30FB7C6
#@
BCM973625A0 CFE v15.3, Endian Mode: Little
Build Date: Fri Aug 19 11:48:16 2016 (Jann@Cynric)
Copyright (C) Broadcom Corporation.
Non-CI box detected
card if inited
******************************************
Splash screen disabled via Ctrl-S
******************************************
Enabling NAND flash at CS2: A5U4GA31ATS(DEVICE ID=0xC8DC9095), ECC Level=4, Spare Area Size=16
MACRONIX SPI flash detected: Size = 16MB, Sector Size 4096, Page Size 256
CPU speed: 751MHz
DDR Frequency: 1061 MHz
DDR Mode: DDR3
Total memory(MEMC 0): 512MB
MEMC 0 DDR Width: 16
Boot Device: SPI
Total flash: 16MB
RTS VERSION: rts_hevc10_1067
ETH0_PHY: INT
ETH0_MDIO_MODE: 1
ETH0_SPEED: 100
ETH0_PHYADDR: 1
DM init finalization
yxml: processing file of 131072 bytes... succeeded!
no file loaded, create xml restoring default xml
loaded network params of: DHCP, 192.168.0.219, 255.255.255.0, 192.168.0.1
[1] type 3, dev nandflash0.kernel, loader elf, filesys raw, file , options
[2] type 3, dev flash0.kernel, loader elf, filesys raw, file , options
[3] type 1, dev eth0, loader elf, filesys tftp, file , options bmem=192M@64M console=ttyS0,1000000 root=/dev/nfs ip=dhcp
added 3 sources to autoboot list
init fp
Initializing USB.
CFE initialized.
found card in unknown state
ca valid!
***** DREAMBOX SSBL *****
Not interrupted yet, trying autoboot or rescue loader, hit any key in the next 500ms to cancel
Proceeding with autoboot.. You can try aborting with Ctrl+C
*** Autoboot: Trying device 'nandflash0.kernel' file (raw,elf)
*** Autoboot failed.
Autoboot cancelled, starting config utility
Initing network, this may take a few secs..
no network connection
retrying..
Initing network, this may take a few secs..
no network connection
Alles anzeigen
DM520 Rescue Loader #103
webif flashlog für dreambox-image-deb-dm520-20171017.tar.xz
Code
[*] Removing volume 0 from /dev/ubi0
[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)
Set volume size to 502951936
Volume ID 0, size 3961 LEBs (502951936 bytes, 479.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1
[*] Creating ubifs filesystem on /dev/ubi0_0
[*] Mounting '/dev/ubi0_0' to '/mnt'
[*] Extracting '/tmp/6Y2Jum' to '/mnt'
[*] Mounting '/dev' to '/mnt/dev'
[*] Mounting '/proc' to '/mnt/proc'
[*] Mounting '/run' to '/mnt/run'
[*] Mounting '/sys' to '/mnt/sys'
[*] Mounting '/tmp' to '/mnt/tmp'
Manufacturer ID: c2
Memory type : 20
Memory density : 18
read id ok
comparing 98 sectors...
nothing to do
update-alternatives: error: cannot append to '/var/log/alternatives.log': No such file or directory
[*] Erasing flash memory on /dev/mtd2
[*] Writing to NAND memory on /dev/mtd2
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt'
[*] Finished successfully. You may reboot now.
Alles anzeigen
Danke für eure Zeit!