CrazyCat can help you , see here
CrazyCat / media_build — Bitbucket
CrazyCat / scan-s2 — Bitbucket
CrazyCat / szap-s2 — Bitbucket
CrazyCat / dvbsnoop — Bitbucket
CrazyCat can help you , see here
CrazyCat / media_build — Bitbucket
CrazyCat / scan-s2 — Bitbucket
CrazyCat / szap-s2 — Bitbucket
CrazyCat / dvbsnoop — Bitbucket
better try open-source drivers
https://bitbucket.or...Cat/media_build
openpliPC development continued by nobody9 -->
Included scripts for building required libraries and download required ubuntu packages.
Included Xine-lib 1.2.x and script for build.
Now work not only with Xine-VDPAU, but also another xine reners (OpenGL, xshm, sdl).
+Present patch for Xine VAAPI support - i make fixed xine-vaapi patch, but look like not work with VAAPI-XVBA (ATI proprietery video acceleration library).
I try use two tuners in my system (satellite and terrestial), but look
like multi-tuner support buggy and work only first adapter. So i make multi-tuner support patch, but still have some limitation - supported only first frontend for each adapter (so in etc/tuxbox/nim_sockets - Frontend_Device is adapter number).
Next i make DVB-S2 Multirstream support, replace 16QAM sat modulation with 16APSK and add 32APSK -> patch
+ extend satellites.xml(used on satellite scan) info with input stream ID and new modulation values (3 - 16APSK, 4 - 32APSK):
Source Code
Btw, BLScan can store blind-scan result in Enigma2 xml format with this extensions.
Some screenshots
Manual DVB-S2 transponder scan setup:
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-mis-scan.png]
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-mis-scan-2.png]
Scan one satellite (transponders list from etc/tuxbox/satellites.xml):
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-sat-scan.png]
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-sat-scan-2.png]
Manual scan for terrestial adapter:
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-terr-scan.png]
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-ter-scan-1.png]
[Blockierte Grafik: http://crazycat69.narod.ru/sattelite/linux/e2pc-ter-scan-2.png]
Hi,
The main TBS patch is from those patches:
https://patchwork.li...rg/patch/23244/
https://patchwork.li...rg/patch/23243/
https://patchwork.li...rg/patch/23242/
They are additionally two more patches from crazycat (https://bitbucket.or...nux-tbs-drivers), the one enables PLS and the other enables proper SNR display.
Here is the push for et10000: https://github.com/X...a-xtrend/pull/5
Here is the push for vuduo, vuduo2, vusolo4k: https://github.com/v...-vuplus/pull/12
Of course the are many other boxes to enable TBS drivers but the start
was done! Now community can take over and enable support for TBS drivers
for other boxes too.
/////////////////////////////////
The other part is the multistream again thanks to crazycat (you rock!) and @taapat for his fulan fork with MIS/PLS.
I was able to grab all required changes and many more changes performed, several GS solved, etc etc.
Here is Enigma2 multistream branch that has almost*** everything you need.
Here you can see all the changes made and finaly if you like to get a patch for it here is the patch.
*** Almost, because Mediaset at 5W is not working, don't know why and I don't even have the hardware to test!
Special thanks goes to glamourservices and other testers, thanks for
your patience. I hope community to make it beter and get the best of
those cards.
/////////////////////////////////
Regarding the T2-MI, there is a project called Astra SM and it has
already support decapsulating T2-MI, I wasn't able to decapsulate T2-MI
from TS dump, maybe someone else has the time to make it.
gitlab.com/berdyansk/astra-sm
https://gitlab.com/b...c/mpegts/t2mi.c
/////////////////////////////////
Regarding the Blindscan support of TBS cards, it is possible, although further patches required.
This might be a good start: http://www.tbsdtv.co...start=100#p4560 and is very easy to implement.
Here you can find the patches to enable blindscan: https://bitbucket.or...e/v4l-updatelee
(note that it uses capabilities currently not in official DVB API ;))
Source Code
Here you can find Visual program that performs blindscan: https://bitbucket.or...telee/updatedvb
Here you can find Console progream that performs blindscan: aaronmcsorley.com/?page_id=91
I really expect that community will make the best from those tuners and soon everything will work prerfect!
Would you please stop spamming the thread with your posts, this doesn't help anybody.
i'am just helping u mister , ok as u like
but for pls contact CrazyCat or athoik in the satdreamGR
********
GOOD NIGHT AND GOOD LUCK
BUONANOTTE ED IN BOCA AL LUPO
Dream Property is very well aware how to implement things even without the help of others.
Dream Property is very well aware how to implement things even without the help of others.
very well so
We hope things go well with D.P
we're waiting for the new tuner dvb-s2x+mis
Tuners are not decoding
Wer hat den Troll hier eigentlich reingelassen?
Tuners are not decoding
the 4:2:2 is related to the hardware not the tuner
Should we tell him that the new Tuner works with Sky UHD Channels so that he can troll that Fake News to all other boards ?
http://dreambox.de/board/index…68-si21692-c55-short-pdf/
From its specifications I can say that S2X/APSK/MIS should be available.
If tuner capabilities anounce FE_CAN_MULTISTREAM then drivers are most probably ready.
when DREAM-PROPERTY will
anounce support and drivers from S2X / APSK / MIS ?
sure that will be included on
new softwares collection
In case you haven't noticed yet, let me point it out to you explicitly: all the stuff you're posting is not helpful but indeed bothersome to many of us. How about we take deep breath and pause until Dream releases the triple tuner and its corresponding drivers?
All in One: Triple-Tuner mit DVB-S2X und DVB-T2/C
23. April 2017 mmtux2 Kommentare
Nachdem der neue DVB-T2/C-Tuner erst kürzlich veröffentlicht wurde, hat Dream nun nachgezogen: Ein Triple-Tuner, der DVB-S2X, DVB-T2 und DVB-C in Einem unterstützt!
Erweiterbarkeit durch Tuner
Eines der praktischen Features von Dreamboxen ist, dass diese in der Regel durch Tuner einfach nach- bzw. auf neue Empfangswege umgerüstet werden können. Dies ist besonders dann wichtig, wenn neue Standards für den Empfang von Fernsehen auch neue Hardware voraussetzen, wie es beispielsweise bei der flächendeckenden Einführung von DVB-T2 geschehen ist.
Zudem können durch die neuerliche Entwicklung von Dual- bzw. Twin-Tunern auch vormals Single-Tuner-Dreamboxen nun auch in Dual-Tuner-Receiver nachgerüstet werden, was besonders für Besitzer von DM820, DM900 und DM7080 interessant sein dürfte.
Von Twin zu Triple
[Blockierte Grafik: https://www.dreambox-blog.com/wp-content/uploads/2017/04/TripleTuner_04.jpg]Der neue Triple-Tuner
Mit dem neuen Triple-Tuner geht Dream bei der nachträglichen Erweiterbarkeit noch einen Schritt weiter: Der neue Triple-Tuner beinhaltet gleich drei Tuner in einem. Da selbst bei drei Tunern nur ein Steckplatz in der Dreambox belegt wird, eignet sich dieser Tuner hervorragend für die DM900 UHD oder DM820. Doch auch die DM7080 kann von dem neuen Tuner profitieren. Wie bei der Einführung des DVB-T2 oder dualen DVB-S2-Tuners erwarte ich, dass auch dieser mit allen Dreamboxen kompatibel sein wird, für die es auch das neuste DreamOS auf Basis des OE 2.5 gibt. Dies ist Voraussetzung für die Auslieferung der benötigten Tuner-Treiber.
DVB-S2X, DVB-T2 und DVB-C
[Blockierte Grafik: https://www.dreambox-blog.com/wp-content/uploads/2017/04/TripleTuner_01.jpg]
Der neue Triple-Tuner wird alle wichtigen und neuen Formate unterstützen. Dazu zählen DVB-S2X, DVB-T2 und DVB-C. Wie auf dem Bild sichtbar ist, gibt es zwei Satelliteneingänge und ein Koaxialeingang für DVB-T2 oder DVB-C. Nach dem Bericht von Digitalfernsehen kann der Tuner immer zwei Empfangswege gleichzeitig dekodieren: Entweder 2x DVB-S2X oder DVB-S2X und DVB-T2/C.
Dual-DVB-S2X
Der Triple-Tuner ist der erste Dreambox-kompatible Tuner, der den neuen DVB-Standard S2X für den Satellitenempfang unterstützt. DVB-S2X wurde erst 2014 eingeführt und verspricht eine verbesserte Effizienz von ca. 50 %. Zudem verspricht der Standard auch bessere Bitraten vor allem beim Senden von ultra-hochauflösendem Fernsehen, in dem mehrere Kanäle gebündelt werden können.
Da DVB-S2X nicht abwärtskompatibel ist, wird man mit diesem Triple-Tuner für die Zukunft gut gewappnet sein und spart sich mögliche zukünftige Tuner-Upgrades. Vor allem für Benutzer der DM900 UHD sollte dieser Tuner interessant sein, falls bei der Übertragung von UHD-Sendern tatsächlich auf DVB-S2X umgestellt wird.
Mehr Informationen zum neuen DVB-S2X-Standard gibt es bei dvb.org und Digitalfernsehen.
DVB-T2 und DVB-C über ein Verteiler
[Blockierte Grafik: https://www.dreambox-blog.com/wp-content/uploads/2017/04/TripleTuner_05.jpg]
Der neue Triple-Tuner verfügt über einen Koaxialeingang, der wahlweise für DVB-T2 oder DVB-C genutzt werden kann. Jedoch kann mit ein wenig Tricksen der Eingang für beide Übertragungswege gleichzeitig genutzt werden. Hierzu wird, wie auch beim vor Kurzem vorgestellten DVB-T2/C-Tuner, lediglich ein 5V-Umschalter benötigt. DreamOS kann dann, je nach dem auf welchen Sender geschaltet wird, automatisch zwischen DVB-T2 und DVB-C wechseln.
Verfügbarkeit im Fachhandel
Noch gibt es den Triple-Tuner nicht zu kaufen. Jedoch wurde dieser für Ende April für einen Preis von 99 Euro angekündigt und sollte daher schon in wenigen Tagen bzw. Wochen im Fachhandel verfügbar sein. Sobald der Tuner ausgeliefert wird, werde ich zu gegebener Zeit einen ausführlichen Erfahrungsbericht hier im Dreambox-Blog veröffentlichen.
QUELLE : https://www.dreambox-blog.com/…s2x-und-dvb-t2c#more-9136