if the rescue loader is bootet you theoretically can logon also via the USB with a terminal emulation supportin serial usb connections and use the flash scripts, but this has only limited value because it would be easier to use the Webif of the rescue loader.
Cant load the image
-
-
if the rescue loader is bootet you theoretically can logon also via the USB with a terminal emulation supportin serial usb connections and use the flash scripts, but this has only limited value because it would be easier to use the Webif of the rescue loader.
Can we use such putty to login? Is it necesary to input root and password too? I never use service port yet, how and what the flash scripts if i use service port?Sent from my phone
-
You can use the same flash script that the webinterface is using.
But the big question is: WHAT ARE YOU TRYING TO ACHIEVE? There is no use for a serial connection, as you can do everything by LAN as you did in the first posts...
Pleas be careful as it seems to me, that you are looking for ways to permanently destroy your box -
problem in my 900 UHD box I have no communication lan. only door service. I do not have the dreamup to make the call. Any idea what programs and software to use
when introducing the Egami image of Enigma2.net, normal at the end asked for installation of several plugins I gave it took quite a while to install did not finish. it gave error and made constant reboot.I put another image Openpli was in the middle not finished.
Lastly I was without lan
put the cable Rj I connected the cable of service via Usb with the dreamup 13
I can not connect.
I need your helpplease -
Without LAN
I do not have ip
do not reboot
through the ip box that had
open the pageDM900 Rescue Loader # 103
does not execute any commands -
Get an image from here: http://www.dreamboxupdate.com/
This will startup without any connection to the internet, though you need a LAN connection (including a running DHCP service on your network) to actually flash the image. -
sorry
what cables to use
open the DHCP with which program
I do not have box communication.I call box
with the bar in the middle display.
do not leave
only by turning the back button -
I already have com4 (virtual)
does not communicate with the box yet
to place the image -
DreamUp won't work. Connect your Dreambox to the same network switch like your computer. Start a DHCP server on your network. If you don't have any, use something like "Tiny DHCP". Boot your Dreambox into recovery mode and flash the image.
-
installed the dhcp.
is active
I
can not get into the box
connectedis with the yellow bar in the middle of the screen
next to the red light flashingdoes not advance from place
but not on
-
more
Is there anything to answer on ip 192.168.1 ...
on your network other than Dreambox.
DreamUp May Not Work Properly -
DreamUp will not work at all. The only (suitable) way is flashing using the rescue loader as mentioned. Connecting your Dreambox in proper way to a network is networking basics. Just like hooking a computer up to a router to get internet access or adding a NAS to your network. etc.
-
Externer Inhalt www.youtube.comInhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.
This vídeo solved the placement
of the finger on screen it's a matéria oficina timeThanks you very much