it's not supported, so dmm won't do anything!
DM8000 - problem DVB-S2/8PSK MPEG-4 30000 5/6
-
-
BSBE2 is not certified for your box, the power consumption of these tuners is to high. It may crash or in worst case damage your box if you use two BSBE2 addon tuners.
-
Hi,
i've tested Eutelsat 10°E 11428V 30000 8PSK 5/6 with an Alps BSBE2 in DM8000 now... and it works without any Problem....
No Problem here..
cya
-
Hi! Thank you to check out. Please check Eutelsat 10 ° E 11387 V.
-
Hm you still don't believe us?
Have you ever thought that your signal is maybe too strong (one of your screenshots hits above 19dB) and that's the reason why the tuner doesn't lock the signal? -
I believe you. I do not have 19dB. I want to close the question definitively.
Thank you . -
Hi,
yes Eutelsat 10 ° E 11387 V works too.
But i must zap multiple times between this and other transponder.. sometimes the tuner locks the signal.. sometimes not.
I think this is the Problem with the high power consumption of the ALPS BSBE2 tuner.
This is the reason why the tuner is NOT supported in the DM8000.
cya
-
Hi,
I have to correct my previous posting.
The problem was caused by my local used hardware drivers.
With recent public drivers this problem does not exist.
I can tune without any problem to the listed transponders!
cya
-
[Blockierte Grafik: http://i056.radikal.ru/1404/8c/151d135298cd.jpg]
ABS 2 75,0 ° E -10985 Н 35007-3/4 8PSK DVB -S2
dm800se (7405) -bcm4505:
[Blockierte Grafik: http://s52.radikal.ru/i137/1404/cc/da76cc531bae.jpg]dm8000 (7400) -bcm4506(interval),bcm4505: [Blockierte Grafik: http://s015.radikal.ru/i333/1404/15/38390399dcf6t.jpg][Blockierte Grafik: http://s020.radikal.ru/i706/1404/4b/db3e484ae446t.jpg][Blockierte Grafik: http://s019.radikal.ru/i607/1404/71/f3da68154f72.jpg]
ABS 2 75,0 ° E -10985 Н 35007-3/4 8PSK DVB -S2
[Blockierte Grafik: http://s003.radikal.ru/i204/1404/f2/34f70680e43a.jpg]
?????
Dream-Multimedia something can be done by 8000
-
BCM4501 and BCM4506 have a hardware limit of symbolrate ~33000 for DVB-S2 8PSK
-
Hallo.
Habe ein problemm(nicht nur ich) mit meine DM 8000(internal BCM 4506) und zwar gehts um ABS 2 75,0 ° E -10985 Н 35007-3/4 8PSK DVB -S2 ,die Kanäle werden eingellesen(Scannen) aber bekomme keinen Bild (siehe screenshot 1-4).
Besteht die hoffnung dieses problem mit dem nächsten update zu lösen? Oder kann man die ganze sache vergessen?MfG hanswolf
-
Siehe mein vorheriges Posting
-
BCM4501
• Data Rates:
• DVB-S: 1–45 Msps
• DVB-S2: 10–30 MspsBCM4505
Data Rates:
• DVB-S: 1-45 Msps
• DVB-S2: 1-45 Msps
• 8PSK Turbo: 2-30 MspsBCM4506
Data Rates:
• DVB-S: 1-45 Msps
• DVB-S2: 5-33 Msps
• 8PSK Turbo: 2-30 Msps -
Nach 10 Jahre dreambox muß ich wohl umsteigen auf eine andere box. Traurig. ....
-
Warum verwendest du nicht einfach den BCM4505?
-
und tschüss ...
-
oozoon
Ich bin noch nicht umgestiegen ehrlich sein habe auch kein bock.
Mit dem bcm 4505 ist das 100% das es klappt mit dem oben genannten transponder.weil ich habe schon einen alps rev.m bsbe2-801a gekauft und gehofft das es klapt.aber umsonst. -
Also er sollte das eigentlich können du kannst auch einfach warten bis Ghost was dazu sagt. Aber das beruht auf meinen Infos das der BCM4505 auch 8PSK höher 33000 kann.
Ich kann die Position bzw. den Transponder bei mir leider nicht testen weil das Signal zu schwach ist für 8PSK FEC 3/4 -
Danke für deine nette unterstützung. Ich versuche ein gebrauchte zu kriegen.
-
Vielleicht findet sich ja noch jemand der das mal testen könnte.