Hi @ll.
I have the following issue that the Dreambox won’t lock to the Hispasat 2, 30.0W.
I have two dishes, one with Hotbird 13 E, Astra 19.2E and Astra 28.2E and a second dish with Hispasat.
We have recently had the house painted and the painters had removed the dish with Hispasat. Now I have connected that dish again, but whatever I do it does not lock.
Therefore I cannot add new channels to the Hispasat, but I can still watch in good quality some of the channels from the Hispasat that were already in my bouquet like: EHS, Feeds 1 TSA, Feeds 2 TSA, Feeds 3 TSA, Feeds 4 TSA, Iberalia, Parlamento, Telesur and TV Record.
I have used both Engima Signal Meter and OneStep Satfinder Pro 0.0.9 to set the dish up
If I check the position of the dish it seems to be correct according to the results these two programs display.
On the Hispasat 2, I get values of SNR: 80% db 12.10 BER: 0 AGC 90%
And these are the values I get when looking to e.g: Iberalia, Telesur, etc.
But still if I go to the Dreambox to Satfinder, the Hispasat does not get the checkmark at Lock, while the other 3 satellites do.
It shows there SNR 0%
BER: 49344
I see that I can tune and select Manual transponder or Predefined transponder, but that does not makes a difference.
So why does it shows a good value and I can see still watch some of the Hispasat channels while it does not lock and therefore I cannot add more channels or search for more.
Do you have any idea where to look and how to fix this?