how to flash faster with dream up?

  • Please provide some information about the hard- and software used.


    Box type: 7025
    GUI (enigma1/enigma2):enigma 2
    Firmware version: gemini project 1.30


    how to flash faster with dream up?


    First I´ve tried with "network" that should be faster, but something is wrong,
    it shows only calculating checksum and nothing happens....
    someone can tells me what is wrong ?
    [Blockierte Grafik: http://img110.imageshack.us/img110/8596/dreamupa0ju.th.jpg]


    So I tried the "slow" way, it gets about 35 minutes but works


    [Blockierte Grafik: http://img45.imageshack.us/img45/4959/dreamupb2jw.th.jpg]


    There´s a trick to use network? thak folkz !

    Box type: DreamBox 7025
    GUI: enigma v2.0-0120200601121943
    Firmware version: Gemini Project 2 0.9

    Einmal editiert, zuletzt von mktheone ()

  • What is the real IP of your PC? You assigned 192.168.0.1 but the dropdownlist for the local IP ("select one:") shows 192.168.0.24 as a local IP too.


    You assgined this IP (.24) to the Dreambox wich means that Dreamup tries to talk to itself instead to the box.


    DreamUp should have shown a warning after you pressed the "Connect" button complaining about this IP (.24) stating that this is not a Dreambox.


    To make it clear: "select one:" shows local IP addresses for the PC. This IPs are allocated by windows for the PC and may not be used as IP for the Dreambox (maybe I should check even this rare situation).


    Please check your network configuration for DreamUp and try again.


  • I got here 2 ethernet cards on pc !
    1-> to internet ip. 200.XXX.XXX.XXX
    2-> to dreambox ip 192.168.0.1 - sub 255.255.255.0



    in the DB the settings are ip 192.168.0.24 - sub 255.255.255.0
    gateway is 192.168.0.1 <- is that right ?


    When I try to use the "real" ip, the "calculating checkum" appears and nothing happens, the process frozes


    Tkz

    Box type: DreamBox 7025
    GUI: enigma v2.0-0120200601121943
    Firmware version: Gemini Project 2 0.9

  • Again: 192.168.0.24 is shown in the dropdown list "select one:". That means, this IP is assigned to the PC as well and you can't use it for the Dreambox.


    Just use any other free IP for the Dreambox (192.168.0.11 for example).
    When booting via DreamUp the Box does not use any internal settings from the firmware - it will use the IP you enter in "Remote IP (Box)"

  • Zitat

    Originally posted by DieMade
    Again: 192.168.0.24 is shown in the dropdown list "select one:". That means, this IP is assigned to the PC as well and you can't use it for the Dreambox.


    Just use any other free IP for the Dreambox (192.168.0.11 for example).
    When booting via DreamUp the Box does not use any internal settings from the firmware - it will use the IP you enter in "Remote IP (Box)"


    You were right ! I changed the range to 192.1681.X and I can see the browser interface ! but stills showing the message "calculating checksum" how long it takes? I´m waiting at least 20 minutes and nothing changed.,...


    Tkaz !

    Box type: DreamBox 7025
    GUI: enigma v2.0-0120200601121943
    Firmware version: Gemini Project 2 0.9

  • Your PC has 192.168.0.1 (and 192.168.0.24 as shown in the picture above).
    So the Dreambox needs to have an IP in the same subnet (192.168.0.X).


    Using 192.168.1.X for the Dreambox will not work, as it's a different subnet and your PC does not know how to reach this IP.


    Why don't you use the IP I suggested above for the Dreambox (192.168.0.11)?


    Another question: Does the IP 192.168.0.1 show up in the dropdown list "select one:"? If not, this IP is not recognized as an IP of your PC.


    The easiest way to get the correct IPs for both PC and Dreambox is to use "select one:", DreamUp shows all IPs there, that Windows reports to be configured for the PC and it will assign an IP to the Dreambox itself when selecting an IP from this list.


    "calculating checksum" usually only takes fraction of a second - it just reads the complete Image and (suprise) calculates a checksum.


    What do you mean by "I can see the browser interface" - did you try the Dreambox-IP in a webbrower? If yes, you can also use the Webinterface for flashing the Box.


    If everything fails, please drop me a note - I'd like to find out why DreamUp is not working for you (as it seems to do for many many others :)).

  • To me the thing works a bit different, but tkz for all anyway !!!


    I turn on the dreambox, start the dreamup, it shows the ips....
    I turno off the dreambox and click on the dreamup connect, start the dreambox.


    [Blockierte Grafik: http://img92.imageshack.us/img92/2029/flash015un.th.jpg]


    so I open a browser and use the ip that dreamup showed.... and click on the firmware upgrade on browser.... a new screen comes on !


    [Blockierte Grafik: http://img92.imageshack.us/img92/7233/flash026lm.th.jpg]


    I "browse" the place where image is located.... and click on flash...


    [Blockierte Grafik: http://img150.imageshack.us/img150/7592/flash036nf.th.jpg]


    the flash procedures beggins faster and ends faster.... click on disconect on
    dreamup and is it ok !!!


    restart the box, new image is on !


    TKZ FRIENDS YOU SHOWED ME THE WAY :face_with_tongue:

    Box type: DreamBox 7025
    GUI: enigma v2.0-0120200601121943
    Firmware version: Gemini Project 2 0.9