You are not logged in.

Dear visitor, welcome to Dreamboard. If this is your first visit here, please read the Help. It explains in detail how this page works. To use all features of this page, you should consider registering. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


Saturday, September 17th 2011, 11:15pm

2nd failed! DM800se. Impossible to flash with USB cable

After updating iCVS image (ss84) I got the "2nd failed!" error message on the LCD.
I've then tried to flash it using latest Dreamup but with no luck.
A couple of times it looked like it was about to flash the DM800se, it loaded the file into box and Dreamup also said something like "loading from memory" or similar, but at this stage nothing happened.

Most of the time flashing doesn't work at all and I get this message:
Got wrong response from box: HTTP/1.0 400 Bad Request
Content-Type: text/plain
Server: secondstage/84
Cache-Control: no-cache
Connection: close

lcd: ***SERIAL MODE***
entering serial loop..."

The box is just one or two months old. Is the box broken or am I missing something obvious here ?
And of course, it's not a clone.


Sunday, September 18th 2011, 12:19am

Got it!
I used Dreamers 500HD formulla from another thread with some small changes.

Box connected to your Laptop via USB.
Ethernet cable connected to your Router (DHCP enabled)

1a. Start DreamUP_1_3_3_8 and tick "Use Network". Also choose correct Serial Port (mine was COM18).

1b. I also had this problem: "too much data (or bad sectors) in partition 1 (end: 00040000, pos: 00040000)". If you have that you also must choose "recover bad sectors" in the "Extras" menu in Dreamup.

2. Press the "Connect" button in Dreamup.

3. Start your box and wait a few seconds (flash-loader should be transfered to the Dreambox and you should see something like HTTP or LAN connected) . If all works well you should see the IP adress of the box in the LCD (DM800se).


5. Launch your preferred browser and type in the IP of the Dreambox.

6. Run the firmware-upgrade via
your browser. Use the original firmware for your box,
reboot the Dreambox.

Thanks to Dreamer.


Saturday, March 21st 2015, 1:14pm

Wau, ihr seit meine Helden. Garantie abgelaufen und dann hatte ich auch das Problem mit "2nd failed! DM800se". Jetzt läuft sie wieder :) Hammer ;) :thumbsup: